Table of Contents
A low-level client representing AWS Direct Connect:
client = session.create_client('directconnect')
These are the available methods:
Deprecated in favor of AllocateHostedConnection .
Creates a hosted connection on an interconnect.
Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the given interconnect.
Note
This is intended for use by AWS Direct Connect partners only.
Danger
This operation is deprecated and may not function as expected. This operation should not be used going forward and is only kept for the purpose of backwards compatiblity.
See also: AWS API Documentation
Request Syntax
response = client.allocate_connection_on_interconnect(
bandwidth='string',
connectionName='string',
ownerAccount='string',
interconnectId='string',
vlan=123
)
[REQUIRED]
Bandwidth of the connection.
Example: "500Mbps "
Default: None
Values: 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, or 500Mbps
[REQUIRED]
Name of the provisioned connection.
Example: "500M Connection to AWS "
Default: None
[REQUIRED]
Numeric account Id of the customer for whom the connection will be provisioned.
Example: 123443215678
Default: None
[REQUIRED]
ID of the interconnect on which the connection will be provisioned.
Example: dxcon-456abc78
Default: None
[REQUIRED]
The dedicated VLAN provisioned to the connection.
Example: 101
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS "
Default: None
connectionState (string) --
State of the connection.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
awsDeviceV2 (string) --
The Direct Connection endpoint which the physical connection terminates on.
Creates a hosted connection on an interconnect or a link aggregation group (LAG).
Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the given interconnect or LAG.
Note
This is intended for use by AWS Direct Connect partners only.
See also: AWS API Documentation
Request Syntax
response = client.allocate_hosted_connection(
connectionId='string',
ownerAccount='string',
bandwidth='string',
connectionName='string',
vlan=123
)
[REQUIRED]
The ID of the interconnect or LAG on which the connection will be provisioned.
Example: dxcon-456abc78 or dxlag-abc123
Default: None
[REQUIRED]
The numeric account ID of the customer for whom the connection will be provisioned.
Example: 123443215678
Default: None
[REQUIRED]
The bandwidth of the connection.
Example: 500Mbps
Default: None
Values: 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, or 500Mbps
[REQUIRED]
The name of the provisioned connection.
Example: "500M Connection to AWS "
Default: None
[REQUIRED]
The dedicated VLAN provisioned to the hosted connection.
Example: 101
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS "
Default: None
connectionState (string) --
State of the connection.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
awsDeviceV2 (string) --
The Direct Connection endpoint which the physical connection terminates on.
Provisions a private virtual interface to be owned by another AWS customer.
Virtual interfaces created using this action must be confirmed by the virtual interface owner by using the ConfirmPrivateVirtualInterface action. Until then, the virtual interface will be in 'Confirming' state, and will not be available for handling traffic.
See also: AWS API Documentation
Request Syntax
response = client.allocate_private_virtual_interface(
connectionId='string',
ownerAccount='string',
newPrivateVirtualInterfaceAllocation={
'virtualInterfaceName': 'string',
'vlan': 123,
'asn': 123,
'authKey': 'string',
'amazonAddress': 'string',
'addressFamily': 'ipv4'|'ipv6',
'customerAddress': 'string'
}
)
[REQUIRED]
The connection ID on which the private virtual interface is provisioned.
Default: None
[REQUIRED]
The AWS account that will own the new private virtual interface.
Default: None
[REQUIRED]
Detailed information for the private virtual interface to be provisioned.
Default: None
The name of the virtual interface assigned by the customer.
Example: "My VPC"
The VLAN ID.
Example: 101
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
The authentication key for BGP configuration.
Example: asdf34example
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
Indicates the address family for the BGP peer.
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
dict
Response Syntax
{
'ownerAccount': 'string',
'virtualInterfaceId': 'string',
'location': 'string',
'connectionId': 'string',
'virtualInterfaceType': 'string',
'virtualInterfaceName': 'string',
'vlan': 123,
'asn': 123,
'amazonSideAsn': 123,
'authKey': 'string',
'amazonAddress': 'string',
'customerAddress': 'string',
'addressFamily': 'ipv4'|'ipv6',
'virtualInterfaceState': 'confirming'|'verifying'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'customerRouterConfig': 'string',
'virtualGatewayId': 'string',
'directConnectGatewayId': 'string',
'routeFilterPrefixes': [
{
'cidr': 'string'
},
],
'bgpPeers': [
{
'asn': 123,
'authKey': 'string',
'addressFamily': 'ipv4'|'ipv6',
'amazonAddress': 'string',
'customerAddress': 'string',
'bgpPeerState': 'verifying'|'pending'|'available'|'deleting'|'deleted',
'bgpStatus': 'up'|'down',
'awsDeviceV2': 'string'
},
],
'region': 'string',
'awsDeviceV2': 'string'
}
Response Structure
(dict) --
A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new virtual interface.
virtualInterfaceId (string) --
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
virtualInterfaceType (string) --
The type of virtual interface.
Example: private (Amazon VPC) or public (Amazon S3, Amazon DynamoDB, and so on.)
virtualInterfaceName (string) --
The name of the virtual interface assigned by the customer.
Example: "My VPC"
vlan (integer) --
The VLAN ID.
Example: 101
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
amazonSideAsn (integer) --
The autonomous system number (ASN) for the Amazon side of the connection.
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
addressFamily (string) --
Indicates the address family for the BGP peer.
virtualInterfaceState (string) --
State of the virtual interface.
customerRouterConfig (string) --
Information for generating the customer router configuration.
virtualGatewayId (string) --
The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces.
Example: vgw-123er56
directConnectGatewayId (string) --
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
routeFilterPrefixes (list) --
A list of routes to be advertised to the AWS network in this region (public virtual interface).
(dict) --
A route filter prefix that the customer can advertise through Border Gateway Protocol (BGP) over a public virtual interface.
cidr (string) --
CIDR notation for the advertised route. Multiple routes are separated by commas.
IPv6 CIDRs must be at least a /64 or shorter
Example: 10.10.10.0/24,10.10.11.0/24,2001:db8::/64
bgpPeers (list) --
A list of the BGP peers configured on this virtual interface.
(dict) --
A structure containing information about a BGP peer.
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
addressFamily (string) --
Indicates the address family for the BGP peer.
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
bgpPeerState (string) --
The state of the BGP peer.
bgpStatus (string) --
The Up/Down state of the BGP peer.
Note
A state of up does not indicate the state of the routing function. Ensure that you are receiving routes over the BGP session.
awsDeviceV2 (string) --
The Direct Connection endpoint which the BGP peer terminates on.
region (string) --
The AWS region where the virtual interface is located.
Example: us-east-1
Default: None
awsDeviceV2 (string) --
The Direct Connection endpoint which the virtual interface terminates on.
Provisions a public virtual interface to be owned by a different customer.
The owner of a connection calls this function to provision a public virtual interface which will be owned by another AWS customer.
Virtual interfaces created using this function must be confirmed by the virtual interface owner by calling ConfirmPublicVirtualInterface. Until this step has been completed, the virtual interface will be in 'Confirming' state, and will not be available for handling traffic.
When creating an IPv6 public virtual interface (addressFamily is 'ipv6'), the customer and amazon address fields should be left blank to use auto-assigned IPv6 space. Custom IPv6 Addresses are currently not supported.
See also: AWS API Documentation
Request Syntax
response = client.allocate_public_virtual_interface(
connectionId='string',
ownerAccount='string',
newPublicVirtualInterfaceAllocation={
'virtualInterfaceName': 'string',
'vlan': 123,
'asn': 123,
'authKey': 'string',
'amazonAddress': 'string',
'customerAddress': 'string',
'addressFamily': 'ipv4'|'ipv6',
'routeFilterPrefixes': [
{
'cidr': 'string'
},
]
}
)
[REQUIRED]
The connection ID on which the public virtual interface is provisioned.
Default: None
[REQUIRED]
The AWS account that will own the new public virtual interface.
Default: None
[REQUIRED]
Detailed information for the public virtual interface to be provisioned.
Default: None
The name of the virtual interface assigned by the customer.
Example: "My VPC"
The VLAN ID.
Example: 101
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
The authentication key for BGP configuration.
Example: asdf34example
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
Indicates the address family for the BGP peer.
A list of routes to be advertised to the AWS network in this region (public virtual interface).
A route filter prefix that the customer can advertise through Border Gateway Protocol (BGP) over a public virtual interface.
CIDR notation for the advertised route. Multiple routes are separated by commas.
IPv6 CIDRs must be at least a /64 or shorter
Example: 10.10.10.0/24,10.10.11.0/24,2001:db8::/64
dict
Response Syntax
{
'ownerAccount': 'string',
'virtualInterfaceId': 'string',
'location': 'string',
'connectionId': 'string',
'virtualInterfaceType': 'string',
'virtualInterfaceName': 'string',
'vlan': 123,
'asn': 123,
'amazonSideAsn': 123,
'authKey': 'string',
'amazonAddress': 'string',
'customerAddress': 'string',
'addressFamily': 'ipv4'|'ipv6',
'virtualInterfaceState': 'confirming'|'verifying'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'customerRouterConfig': 'string',
'virtualGatewayId': 'string',
'directConnectGatewayId': 'string',
'routeFilterPrefixes': [
{
'cidr': 'string'
},
],
'bgpPeers': [
{
'asn': 123,
'authKey': 'string',
'addressFamily': 'ipv4'|'ipv6',
'amazonAddress': 'string',
'customerAddress': 'string',
'bgpPeerState': 'verifying'|'pending'|'available'|'deleting'|'deleted',
'bgpStatus': 'up'|'down',
'awsDeviceV2': 'string'
},
],
'region': 'string',
'awsDeviceV2': 'string'
}
Response Structure
(dict) --
A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new virtual interface.
virtualInterfaceId (string) --
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
virtualInterfaceType (string) --
The type of virtual interface.
Example: private (Amazon VPC) or public (Amazon S3, Amazon DynamoDB, and so on.)
virtualInterfaceName (string) --
The name of the virtual interface assigned by the customer.
Example: "My VPC"
vlan (integer) --
The VLAN ID.
Example: 101
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
amazonSideAsn (integer) --
The autonomous system number (ASN) for the Amazon side of the connection.
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
addressFamily (string) --
Indicates the address family for the BGP peer.
virtualInterfaceState (string) --
State of the virtual interface.
customerRouterConfig (string) --
Information for generating the customer router configuration.
virtualGatewayId (string) --
The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces.
Example: vgw-123er56
directConnectGatewayId (string) --
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
routeFilterPrefixes (list) --
A list of routes to be advertised to the AWS network in this region (public virtual interface).
(dict) --
A route filter prefix that the customer can advertise through Border Gateway Protocol (BGP) over a public virtual interface.
cidr (string) --
CIDR notation for the advertised route. Multiple routes are separated by commas.
IPv6 CIDRs must be at least a /64 or shorter
Example: 10.10.10.0/24,10.10.11.0/24,2001:db8::/64
bgpPeers (list) --
A list of the BGP peers configured on this virtual interface.
(dict) --
A structure containing information about a BGP peer.
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
addressFamily (string) --
Indicates the address family for the BGP peer.
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
bgpPeerState (string) --
The state of the BGP peer.
bgpStatus (string) --
The Up/Down state of the BGP peer.
Note
A state of up does not indicate the state of the routing function. Ensure that you are receiving routes over the BGP session.
awsDeviceV2 (string) --
The Direct Connection endpoint which the BGP peer terminates on.
region (string) --
The AWS region where the virtual interface is located.
Example: us-east-1
Default: None
awsDeviceV2 (string) --
The Direct Connection endpoint which the virtual interface terminates on.
Associates an existing connection with a link aggregation group (LAG). The connection is interrupted and re-established as a member of the LAG (connectivity to AWS will be interrupted). The connection must be hosted on the same AWS Direct Connect endpoint as the LAG, and its bandwidth must match the bandwidth for the LAG. You can reassociate a connection that's currently associated with a different LAG; however, if removing the connection will cause the original LAG to fall below its setting for minimum number of operational connections, the request fails.
Any virtual interfaces that are directly associated with the connection are automatically re-associated with the LAG. If the connection was originally associated with a different LAG, the virtual interfaces remain associated with the original LAG.
For interconnects, any hosted connections are automatically re-associated with the LAG. If the interconnect was originally associated with a different LAG, the hosted connections remain associated with the original LAG.
See also: AWS API Documentation
Request Syntax
response = client.associate_connection_with_lag(
connectionId='string',
lagId='string'
)
[REQUIRED]
The ID of the connection.
Example: dxcon-abc123
Default: None
[REQUIRED]
The ID of the LAG with which to associate the connection.
Example: dxlag-abc123
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS "
Default: None
connectionState (string) --
State of the connection.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
awsDeviceV2 (string) --
The Direct Connection endpoint which the physical connection terminates on.
Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect. If the target interconnect or LAG has an existing hosted connection with a conflicting VLAN number or IP address, the operation fails. This action temporarily interrupts the hosted connection's connectivity to AWS as it is being migrated.
Note
This is intended for use by AWS Direct Connect partners only.
See also: AWS API Documentation
Request Syntax
response = client.associate_hosted_connection(
connectionId='string',
parentConnectionId='string'
)
[REQUIRED]
The ID of the hosted connection.
Example: dxcon-abc123
Default: None
[REQUIRED]
The ID of the interconnect or the LAG.
Example: dxcon-abc123 or dxlag-abc123
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS "
Default: None
connectionState (string) --
State of the connection.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
awsDeviceV2 (string) --
The Direct Connection endpoint which the physical connection terminates on.
Associates a virtual interface with a specified link aggregation group (LAG) or connection. Connectivity to AWS is temporarily interrupted as the virtual interface is being migrated. If the target connection or LAG has an associated virtual interface with a conflicting VLAN number or a conflicting IP address, the operation fails.
Virtual interfaces associated with a hosted connection cannot be associated with a LAG; hosted connections must be migrated along with their virtual interfaces using AssociateHostedConnection .
In order to reassociate a virtual interface to a new connection or LAG, the requester must own either the virtual interface itself or the connection to which the virtual interface is currently associated. Additionally, the requester must own the connection or LAG to which the virtual interface will be newly associated.
See also: AWS API Documentation
Request Syntax
response = client.associate_virtual_interface(
virtualInterfaceId='string',
connectionId='string'
)
[REQUIRED]
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
[REQUIRED]
The ID of the LAG or connection with which to associate the virtual interface.
Example: dxlag-abc123 or dxcon-abc123
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'virtualInterfaceId': 'string',
'location': 'string',
'connectionId': 'string',
'virtualInterfaceType': 'string',
'virtualInterfaceName': 'string',
'vlan': 123,
'asn': 123,
'amazonSideAsn': 123,
'authKey': 'string',
'amazonAddress': 'string',
'customerAddress': 'string',
'addressFamily': 'ipv4'|'ipv6',
'virtualInterfaceState': 'confirming'|'verifying'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'customerRouterConfig': 'string',
'virtualGatewayId': 'string',
'directConnectGatewayId': 'string',
'routeFilterPrefixes': [
{
'cidr': 'string'
},
],
'bgpPeers': [
{
'asn': 123,
'authKey': 'string',
'addressFamily': 'ipv4'|'ipv6',
'amazonAddress': 'string',
'customerAddress': 'string',
'bgpPeerState': 'verifying'|'pending'|'available'|'deleting'|'deleted',
'bgpStatus': 'up'|'down',
'awsDeviceV2': 'string'
},
],
'region': 'string',
'awsDeviceV2': 'string'
}
Response Structure
(dict) --
A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new virtual interface.
virtualInterfaceId (string) --
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
virtualInterfaceType (string) --
The type of virtual interface.
Example: private (Amazon VPC) or public (Amazon S3, Amazon DynamoDB, and so on.)
virtualInterfaceName (string) --
The name of the virtual interface assigned by the customer.
Example: "My VPC"
vlan (integer) --
The VLAN ID.
Example: 101
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
amazonSideAsn (integer) --
The autonomous system number (ASN) for the Amazon side of the connection.
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
addressFamily (string) --
Indicates the address family for the BGP peer.
virtualInterfaceState (string) --
State of the virtual interface.
customerRouterConfig (string) --
Information for generating the customer router configuration.
virtualGatewayId (string) --
The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces.
Example: vgw-123er56
directConnectGatewayId (string) --
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
routeFilterPrefixes (list) --
A list of routes to be advertised to the AWS network in this region (public virtual interface).
(dict) --
A route filter prefix that the customer can advertise through Border Gateway Protocol (BGP) over a public virtual interface.
cidr (string) --
CIDR notation for the advertised route. Multiple routes are separated by commas.
IPv6 CIDRs must be at least a /64 or shorter
Example: 10.10.10.0/24,10.10.11.0/24,2001:db8::/64
bgpPeers (list) --
A list of the BGP peers configured on this virtual interface.
(dict) --
A structure containing information about a BGP peer.
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
addressFamily (string) --
Indicates the address family for the BGP peer.
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
bgpPeerState (string) --
The state of the BGP peer.
bgpStatus (string) --
The Up/Down state of the BGP peer.
Note
A state of up does not indicate the state of the routing function. Ensure that you are receiving routes over the BGP session.
awsDeviceV2 (string) --
The Direct Connection endpoint which the BGP peer terminates on.
region (string) --
The AWS region where the virtual interface is located.
Example: us-east-1
Default: None
awsDeviceV2 (string) --
The Direct Connection endpoint which the virtual interface terminates on.
Check if an operation can be paginated.
Confirm the creation of a hosted connection on an interconnect.
Upon creation, the hosted connection is initially in the 'Ordering' state, and will remain in this state until the owner calls ConfirmConnection to confirm creation of the hosted connection.
See also: AWS API Documentation
Request Syntax
response = client.confirm_connection(
connectionId='string'
)
[REQUIRED]
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
{
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected'
}
Response Structure
The response received when ConfirmConnection is called.
State of the connection.
Accept ownership of a private virtual interface created by another customer.
After the virtual interface owner calls this function, the virtual interface will be created and attached to the given virtual private gateway or direct connect gateway, and will be available for handling traffic.
See also: AWS API Documentation
Request Syntax
response = client.confirm_private_virtual_interface(
virtualInterfaceId='string',
virtualGatewayId='string',
directConnectGatewayId='string'
)
[REQUIRED]
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
ID of the virtual private gateway that will be attached to the virtual interface.
A virtual private gateway can be managed via the Amazon Virtual Private Cloud (VPC) console or the EC2 CreateVpnGateway action.
Default: None
ID of the direct connect gateway that will be attached to the virtual interface.
A direct connect gateway can be managed via the AWS Direct Connect console or the CreateDirectConnectGateway action.
Default: None
dict
Response Syntax
{
'virtualInterfaceState': 'confirming'|'verifying'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected'
}
Response Structure
(dict) --
The response received when ConfirmPrivateVirtualInterface is called.
virtualInterfaceState (string) --
State of the virtual interface.
Accept ownership of a public virtual interface created by another customer.
After the virtual interface owner calls this function, the specified virtual interface will be created and made available for handling traffic.
See also: AWS API Documentation
Request Syntax
response = client.confirm_public_virtual_interface(
virtualInterfaceId='string'
)
[REQUIRED]
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
{
'virtualInterfaceState': 'confirming'|'verifying'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected'
}
Response Structure
The response received when ConfirmPublicVirtualInterface is called.
State of the virtual interface.
Creates a new BGP peer on a specified virtual interface. The BGP peer cannot be in the same address family (IPv4/IPv6) of an existing BGP peer on the virtual interface.
You must create a BGP peer for the corresponding address family in order to access AWS resources that also use that address family.
When creating a IPv6 BGP peer, the Amazon address and customer address fields must be left blank. IPv6 addresses are automatically assigned from Amazon's pool of IPv6 addresses; you cannot specify custom IPv6 addresses.
For a public virtual interface, the Autonomous System Number (ASN) must be private or already whitelisted for the virtual interface.
See also: AWS API Documentation
Request Syntax
response = client.create_bgp_peer(
virtualInterfaceId='string',
newBGPPeer={
'asn': 123,
'authKey': 'string',
'addressFamily': 'ipv4'|'ipv6',
'amazonAddress': 'string',
'customerAddress': 'string'
}
)
The ID of the virtual interface on which the BGP peer will be provisioned.
Example: dxvif-456abc78
Default: None
Detailed information for the BGP peer to be created.
Default: None
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
The authentication key for BGP configuration.
Example: asdf34example
Indicates the address family for the BGP peer.
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
dict
Response Syntax
{
'virtualInterface': {
'ownerAccount': 'string',
'virtualInterfaceId': 'string',
'location': 'string',
'connectionId': 'string',
'virtualInterfaceType': 'string',
'virtualInterfaceName': 'string',
'vlan': 123,
'asn': 123,
'amazonSideAsn': 123,
'authKey': 'string',
'amazonAddress': 'string',
'customerAddress': 'string',
'addressFamily': 'ipv4'|'ipv6',
'virtualInterfaceState': 'confirming'|'verifying'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'customerRouterConfig': 'string',
'virtualGatewayId': 'string',
'directConnectGatewayId': 'string',
'routeFilterPrefixes': [
{
'cidr': 'string'
},
],
'bgpPeers': [
{
'asn': 123,
'authKey': 'string',
'addressFamily': 'ipv4'|'ipv6',
'amazonAddress': 'string',
'customerAddress': 'string',
'bgpPeerState': 'verifying'|'pending'|'available'|'deleting'|'deleted',
'bgpStatus': 'up'|'down',
'awsDeviceV2': 'string'
},
],
'region': 'string',
'awsDeviceV2': 'string'
}
}
Response Structure
(dict) --
The response received when CreateBGPPeer is called.
virtualInterface (dict) --
A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new virtual interface.
virtualInterfaceId (string) --
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
virtualInterfaceType (string) --
The type of virtual interface.
Example: private (Amazon VPC) or public (Amazon S3, Amazon DynamoDB, and so on.)
virtualInterfaceName (string) --
The name of the virtual interface assigned by the customer.
Example: "My VPC"
vlan (integer) --
The VLAN ID.
Example: 101
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
amazonSideAsn (integer) --
The autonomous system number (ASN) for the Amazon side of the connection.
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
addressFamily (string) --
Indicates the address family for the BGP peer.
virtualInterfaceState (string) --
State of the virtual interface.
customerRouterConfig (string) --
Information for generating the customer router configuration.
virtualGatewayId (string) --
The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces.
Example: vgw-123er56
directConnectGatewayId (string) --
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
routeFilterPrefixes (list) --
A list of routes to be advertised to the AWS network in this region (public virtual interface).
(dict) --
A route filter prefix that the customer can advertise through Border Gateway Protocol (BGP) over a public virtual interface.
cidr (string) --
CIDR notation for the advertised route. Multiple routes are separated by commas.
IPv6 CIDRs must be at least a /64 or shorter
Example: 10.10.10.0/24,10.10.11.0/24,2001:db8::/64
bgpPeers (list) --
A list of the BGP peers configured on this virtual interface.
(dict) --
A structure containing information about a BGP peer.
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
addressFamily (string) --
Indicates the address family for the BGP peer.
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
bgpPeerState (string) --
The state of the BGP peer.
bgpStatus (string) --
The Up/Down state of the BGP peer.
Note
A state of up does not indicate the state of the routing function. Ensure that you are receiving routes over the BGP session.
awsDeviceV2 (string) --
The Direct Connection endpoint which the BGP peer terminates on.
region (string) --
The AWS region where the virtual interface is located.
Example: us-east-1
Default: None
awsDeviceV2 (string) --
The Direct Connection endpoint which the virtual interface terminates on.
Creates a new connection between the customer network and a specific AWS Direct Connect location.
A connection links your internal network to an AWS Direct Connect location over a standard 1 gigabit or 10 gigabit Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an AWS Direct Connect router. An AWS Direct Connect location provides access to Amazon Web Services in the region it is associated with. You can establish connections with AWS Direct Connect locations in multiple regions, but a connection in one region does not provide connectivity to other regions.
To find the locations for your region, use DescribeLocations .
You can automatically add the new connection to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new connection is allocated on the same AWS Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no connection will be created.
See also: AWS API Documentation
Request Syntax
response = client.create_connection(
location='string',
bandwidth='string',
connectionName='string',
lagId='string'
)
[REQUIRED]
Where the connection is located.
Example: EqSV5
Default: None
[REQUIRED]
Bandwidth of the connection.
Example: 1Gbps
Default: None
[REQUIRED]
The name of the connection.
Example: "My Connection to AWS "
Default: None
The ID of the LAG.
Example: dxlag-fg5678gh
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS "
Default: None
connectionState (string) --
State of the connection.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
awsDeviceV2 (string) --
The Direct Connection endpoint which the physical connection terminates on.
Creates a new direct connect gateway. A direct connect gateway is an intermediate object that enables you to connect a set of virtual interfaces and virtual private gateways. direct connect gateways are global and visible in any AWS region after they are created. The virtual interfaces and virtual private gateways that are connected through a direct connect gateway can be in different regions. This enables you to connect to a VPC in any region, regardless of the region in which the virtual interfaces are located, and pass traffic between them.
See also: AWS API Documentation
Request Syntax
response = client.create_direct_connect_gateway(
directConnectGatewayName='string',
amazonSideAsn=123
)
[REQUIRED]
The name of the direct connect gateway.
Example: "My direct connect gateway"
Default: None
The autonomous system number (ASN) for Border Gateway Protocol (BGP) to be configured on the Amazon side of the connection. The ASN must be in the private range of 64,512 to 65,534 or 4,200,000,000 to 4,294,967,294
Example: 65200
Default: 64512
dict
Response Syntax
{
'directConnectGateway': {
'directConnectGatewayId': 'string',
'directConnectGatewayName': 'string',
'amazonSideAsn': 123,
'ownerAccount': 'string',
'directConnectGatewayState': 'pending'|'available'|'deleting'|'deleted',
'stateChangeError': 'string'
}
}
Response Structure
(dict) --
Container for the response from the CreateDirectConnectGateway API call
directConnectGateway (dict) --
The direct connect gateway to be created.
directConnectGatewayId (string) --
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
directConnectGatewayName (string) --
The name of the direct connect gateway.
Example: "My direct connect gateway"
Default: None
amazonSideAsn (integer) --
The autonomous system number (ASN) for the Amazon side of the connection.
ownerAccount (string) --
The AWS account ID of the owner of the direct connect gateway.
directConnectGatewayState (string) --
State of the direct connect gateway.
stateChangeError (string) --
Error message when the state of an object fails to advance.
Creates an association between a direct connect gateway and a virtual private gateway (VGW). The VGW must be attached to a VPC and must not be associated with another direct connect gateway.
See also: AWS API Documentation
Request Syntax
response = client.create_direct_connect_gateway_association(
directConnectGatewayId='string',
virtualGatewayId='string'
)
[REQUIRED]
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
Default: None
[REQUIRED]
The ID of the virtual private gateway.
Example: "vgw-abc123ef"
Default: None
dict
Response Syntax
{
'directConnectGatewayAssociation': {
'directConnectGatewayId': 'string',
'virtualGatewayId': 'string',
'virtualGatewayRegion': 'string',
'virtualGatewayOwnerAccount': 'string',
'associationState': 'associating'|'associated'|'disassociating'|'disassociated',
'stateChangeError': 'string'
}
}
Response Structure
(dict) --
Container for the response from the CreateDirectConnectGatewayAssociation API call
directConnectGatewayAssociation (dict) --
The direct connect gateway association to be created.
directConnectGatewayId (string) --
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
virtualGatewayId (string) --
The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces.
Example: vgw-123er56
virtualGatewayRegion (string) --
The region in which the virtual private gateway is located.
Example: us-east-1
virtualGatewayOwnerAccount (string) --
The AWS account ID of the owner of the virtual private gateway.
associationState (string) --
State of the direct connect gateway association.
stateChangeError (string) --
Error message when the state of an object fails to advance.
Creates a new interconnect between a AWS Direct Connect partner's network and a specific AWS Direct Connect location.
An interconnect is a connection which is capable of hosting other connections. The AWS Direct Connect partner can use an interconnect to provide sub-1Gbps AWS Direct Connect service to tier 2 customers who do not have their own connections. Like a standard connection, an interconnect links the AWS Direct Connect partner's network to an AWS Direct Connect location over a standard 1 Gbps or 10 Gbps Ethernet fiber-optic cable. One end is connected to the partner's router, the other to an AWS Direct Connect router.
You can automatically add the new interconnect to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new interconnect is allocated on the same AWS Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no interconnect will be created.
For each end customer, the AWS Direct Connect partner provisions a connection on their interconnect by calling AllocateConnectionOnInterconnect. The end customer can then connect to AWS resources by creating a virtual interface on their connection, using the VLAN assigned to them by the AWS Direct Connect partner.
Note
This is intended for use by AWS Direct Connect partners only.
See also: AWS API Documentation
Request Syntax
response = client.create_interconnect(
interconnectName='string',
bandwidth='string',
location='string',
lagId='string'
)
[REQUIRED]
The name of the interconnect.
Example: "1G Interconnect to AWS "
Default: None
[REQUIRED]
The port bandwidth
Example: 1Gbps
Default: None
Available values: 1Gbps,10Gbps
[REQUIRED]
Where the interconnect is located
Example: EqSV5
Default: None
The ID of the LAG.
Example: dxlag-fg5678gh
dict
Response Syntax
{
'interconnectId': 'string',
'interconnectName': 'string',
'interconnectState': 'requested'|'pending'|'available'|'down'|'deleting'|'deleted',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
}
Response Structure
(dict) --
An interconnect is a connection that can host other connections.
Like a standard AWS Direct Connect connection, an interconnect represents the physical connection between an AWS Direct Connect partner's network and a specific Direct Connect location. An AWS Direct Connect partner who owns an interconnect can provision hosted connections on the interconnect for their end customers, thereby providing the end customers with connectivity to AWS services.
The resources of the interconnect, including bandwidth and VLAN numbers, are shared by all of the hosted connections on the interconnect, and the owner of the interconnect determines how these resources are assigned.
interconnectId (string) --
The ID of the interconnect.
Example: dxcon-abc123
interconnectName (string) --
The name of the interconnect.
Example: "1G Interconnect to AWS "
interconnectState (string) --
State of the interconnect.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps
Default: None
loaIssueTime (datetime) --
The time of the most recent call to DescribeInterconnectLoa for this Interconnect.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
awsDeviceV2 (string) --
The Direct Connection endpoint which the physical connection terminates on.
Creates a new link aggregation group (LAG) with the specified number of bundled physical connections between the customer network and a specific AWS Direct Connect location. A LAG is a logical interface that uses the Link Aggregation Control Protocol (LACP) to aggregate multiple 1 gigabit or 10 gigabit interfaces, allowing you to treat them as a single interface.
All connections in a LAG must use the same bandwidth (for example, 10 Gbps), and must terminate at the same AWS Direct Connect endpoint.
You can have up to 10 connections per LAG. Regardless of this limit, if you request more connections for the LAG than AWS Direct Connect can allocate on a single endpoint, no LAG is created.
You can specify an existing physical connection or interconnect to include in the LAG (which counts towards the total number of connections). Doing so interrupts the current physical connection or hosted connections, and re-establishes them as a member of the LAG. The LAG will be created on the same AWS Direct Connect endpoint to which the connection terminates. Any virtual interfaces associated with the connection are automatically disassociated and re-associated with the LAG. The connection ID does not change.
If the AWS account used to create a LAG is a registered AWS Direct Connect partner, the LAG is automatically enabled to host sub-connections. For a LAG owned by a partner, any associated virtual interfaces cannot be directly configured.
See also: AWS API Documentation
Request Syntax
response = client.create_lag(
numberOfConnections=123,
location='string',
connectionsBandwidth='string',
lagName='string',
connectionId='string'
)
[REQUIRED]
The number of physical connections initially provisioned and bundled by the LAG.
Default: None
[REQUIRED]
The AWS Direct Connect location in which the LAG should be allocated.
Example: EqSV5
Default: None
[REQUIRED]
The bandwidth of the individual physical connections bundled by the LAG.
Default: None
Available values: 1Gbps, 10Gbps
[REQUIRED]
The name of the LAG.
Example: "3x10G LAG to AWS "
Default: None
The ID of an existing connection to migrate to the LAG.
Default: None
dict
Response Syntax
{
'connectionsBandwidth': 'string',
'numberOfConnections': 123,
'lagId': 'string',
'ownerAccount': 'string',
'lagName': 'string',
'lagState': 'requested'|'pending'|'available'|'down'|'deleting'|'deleted',
'location': 'string',
'region': 'string',
'minimumLinks': 123,
'awsDevice': 'string',
'awsDeviceV2': 'string',
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
},
],
'allowsHostedConnections': True|False
}
Response Structure
(dict) --
Describes a link aggregation group (LAG). A LAG is a connection that uses the Link Aggregation Control Protocol (LACP) to logically aggregate a bundle of physical connections. Like an interconnect, it can host other connections. All connections in a LAG must terminate on the same physical AWS Direct Connect endpoint, and must be the same bandwidth.
connectionsBandwidth (string) --
The individual bandwidth of the physical connections bundled by the LAG.
Available values: 1Gbps, 10Gbps
numberOfConnections (integer) --
The number of physical connections bundled by the LAG, up to a maximum of 10.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
ownerAccount (string) --
The owner of the LAG.
lagName (string) --
The name of the LAG.
lagState (string) --
The state of the LAG.
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
minimumLinks (integer) --
The minimum number of physical connections that must be operational for the LAG itself to be operational. If the number of operational connections drops below this setting, the LAG state changes to down . This value can help to ensure that a LAG is not overutilized if a significant number of its bundled connections go down.
awsDevice (string) --
Deprecated in favor of awsDeviceV2.
The AWS Direct Connection endpoint that hosts the LAG.
awsDeviceV2 (string) --
The AWS Direct Connection endpoint that hosts the LAG.
connections (list) --
A list of connections bundled by this LAG.
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS "
Default: None
connectionState (string) --
State of the connection.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
awsDeviceV2 (string) --
The Direct Connection endpoint which the physical connection terminates on.
allowsHostedConnections (boolean) --
Indicates whether the LAG can host other connections.
Note
This is intended for use by AWS Direct Connect partners only.
Creates a new private virtual interface. A virtual interface is the VLAN that transports AWS Direct Connect traffic. A private virtual interface supports sending traffic to a single virtual private cloud (VPC).
See also: AWS API Documentation
Request Syntax
response = client.create_private_virtual_interface(
connectionId='string',
newPrivateVirtualInterface={
'virtualInterfaceName': 'string',
'vlan': 123,
'asn': 123,
'authKey': 'string',
'amazonAddress': 'string',
'customerAddress': 'string',
'addressFamily': 'ipv4'|'ipv6',
'virtualGatewayId': 'string',
'directConnectGatewayId': 'string'
}
)
[REQUIRED]
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
[REQUIRED]
Detailed information for the private virtual interface to be created.
Default: None
The name of the virtual interface assigned by the customer.
Example: "My VPC"
The VLAN ID.
Example: 101
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
The authentication key for BGP configuration.
Example: asdf34example
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
Indicates the address family for the BGP peer.
The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces.
Example: vgw-123er56
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
dict
Response Syntax
{
'ownerAccount': 'string',
'virtualInterfaceId': 'string',
'location': 'string',
'connectionId': 'string',
'virtualInterfaceType': 'string',
'virtualInterfaceName': 'string',
'vlan': 123,
'asn': 123,
'amazonSideAsn': 123,
'authKey': 'string',
'amazonAddress': 'string',
'customerAddress': 'string',
'addressFamily': 'ipv4'|'ipv6',
'virtualInterfaceState': 'confirming'|'verifying'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'customerRouterConfig': 'string',
'virtualGatewayId': 'string',
'directConnectGatewayId': 'string',
'routeFilterPrefixes': [
{
'cidr': 'string'
},
],
'bgpPeers': [
{
'asn': 123,
'authKey': 'string',
'addressFamily': 'ipv4'|'ipv6',
'amazonAddress': 'string',
'customerAddress': 'string',
'bgpPeerState': 'verifying'|'pending'|'available'|'deleting'|'deleted',
'bgpStatus': 'up'|'down',
'awsDeviceV2': 'string'
},
],
'region': 'string',
'awsDeviceV2': 'string'
}
Response Structure
(dict) --
A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new virtual interface.
virtualInterfaceId (string) --
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
virtualInterfaceType (string) --
The type of virtual interface.
Example: private (Amazon VPC) or public (Amazon S3, Amazon DynamoDB, and so on.)
virtualInterfaceName (string) --
The name of the virtual interface assigned by the customer.
Example: "My VPC"
vlan (integer) --
The VLAN ID.
Example: 101
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
amazonSideAsn (integer) --
The autonomous system number (ASN) for the Amazon side of the connection.
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
addressFamily (string) --
Indicates the address family for the BGP peer.
virtualInterfaceState (string) --
State of the virtual interface.
customerRouterConfig (string) --
Information for generating the customer router configuration.
virtualGatewayId (string) --
The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces.
Example: vgw-123er56
directConnectGatewayId (string) --
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
routeFilterPrefixes (list) --
A list of routes to be advertised to the AWS network in this region (public virtual interface).
(dict) --
A route filter prefix that the customer can advertise through Border Gateway Protocol (BGP) over a public virtual interface.
cidr (string) --
CIDR notation for the advertised route. Multiple routes are separated by commas.
IPv6 CIDRs must be at least a /64 or shorter
Example: 10.10.10.0/24,10.10.11.0/24,2001:db8::/64
bgpPeers (list) --
A list of the BGP peers configured on this virtual interface.
(dict) --
A structure containing information about a BGP peer.
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
addressFamily (string) --
Indicates the address family for the BGP peer.
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
bgpPeerState (string) --
The state of the BGP peer.
bgpStatus (string) --
The Up/Down state of the BGP peer.
Note
A state of up does not indicate the state of the routing function. Ensure that you are receiving routes over the BGP session.
awsDeviceV2 (string) --
The Direct Connection endpoint which the BGP peer terminates on.
region (string) --
The AWS region where the virtual interface is located.
Example: us-east-1
Default: None
awsDeviceV2 (string) --
The Direct Connection endpoint which the virtual interface terminates on.
Creates a new public virtual interface. A virtual interface is the VLAN that transports AWS Direct Connect traffic. A public virtual interface supports sending traffic to public services of AWS such as Amazon Simple Storage Service (Amazon S3).
When creating an IPv6 public virtual interface (addressFamily is 'ipv6'), the customer and amazon address fields should be left blank to use auto-assigned IPv6 space. Custom IPv6 Addresses are currently not supported.
See also: AWS API Documentation
Request Syntax
response = client.create_public_virtual_interface(
connectionId='string',
newPublicVirtualInterface={
'virtualInterfaceName': 'string',
'vlan': 123,
'asn': 123,
'authKey': 'string',
'amazonAddress': 'string',
'customerAddress': 'string',
'addressFamily': 'ipv4'|'ipv6',
'routeFilterPrefixes': [
{
'cidr': 'string'
},
]
}
)
[REQUIRED]
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
[REQUIRED]
Detailed information for the public virtual interface to be created.
Default: None
The name of the virtual interface assigned by the customer.
Example: "My VPC"
The VLAN ID.
Example: 101
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
The authentication key for BGP configuration.
Example: asdf34example
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
Indicates the address family for the BGP peer.
A list of routes to be advertised to the AWS network in this region (public virtual interface).
A route filter prefix that the customer can advertise through Border Gateway Protocol (BGP) over a public virtual interface.
CIDR notation for the advertised route. Multiple routes are separated by commas.
IPv6 CIDRs must be at least a /64 or shorter
Example: 10.10.10.0/24,10.10.11.0/24,2001:db8::/64
dict
Response Syntax
{
'ownerAccount': 'string',
'virtualInterfaceId': 'string',
'location': 'string',
'connectionId': 'string',
'virtualInterfaceType': 'string',
'virtualInterfaceName': 'string',
'vlan': 123,
'asn': 123,
'amazonSideAsn': 123,
'authKey': 'string',
'amazonAddress': 'string',
'customerAddress': 'string',
'addressFamily': 'ipv4'|'ipv6',
'virtualInterfaceState': 'confirming'|'verifying'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'customerRouterConfig': 'string',
'virtualGatewayId': 'string',
'directConnectGatewayId': 'string',
'routeFilterPrefixes': [
{
'cidr': 'string'
},
],
'bgpPeers': [
{
'asn': 123,
'authKey': 'string',
'addressFamily': 'ipv4'|'ipv6',
'amazonAddress': 'string',
'customerAddress': 'string',
'bgpPeerState': 'verifying'|'pending'|'available'|'deleting'|'deleted',
'bgpStatus': 'up'|'down',
'awsDeviceV2': 'string'
},
],
'region': 'string',
'awsDeviceV2': 'string'
}
Response Structure
(dict) --
A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new virtual interface.
virtualInterfaceId (string) --
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
virtualInterfaceType (string) --
The type of virtual interface.
Example: private (Amazon VPC) or public (Amazon S3, Amazon DynamoDB, and so on.)
virtualInterfaceName (string) --
The name of the virtual interface assigned by the customer.
Example: "My VPC"
vlan (integer) --
The VLAN ID.
Example: 101
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
amazonSideAsn (integer) --
The autonomous system number (ASN) for the Amazon side of the connection.
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
addressFamily (string) --
Indicates the address family for the BGP peer.
virtualInterfaceState (string) --
State of the virtual interface.
customerRouterConfig (string) --
Information for generating the customer router configuration.
virtualGatewayId (string) --
The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces.
Example: vgw-123er56
directConnectGatewayId (string) --
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
routeFilterPrefixes (list) --
A list of routes to be advertised to the AWS network in this region (public virtual interface).
(dict) --
A route filter prefix that the customer can advertise through Border Gateway Protocol (BGP) over a public virtual interface.
cidr (string) --
CIDR notation for the advertised route. Multiple routes are separated by commas.
IPv6 CIDRs must be at least a /64 or shorter
Example: 10.10.10.0/24,10.10.11.0/24,2001:db8::/64
bgpPeers (list) --
A list of the BGP peers configured on this virtual interface.
(dict) --
A structure containing information about a BGP peer.
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
addressFamily (string) --
Indicates the address family for the BGP peer.
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
bgpPeerState (string) --
The state of the BGP peer.
bgpStatus (string) --
The Up/Down state of the BGP peer.
Note
A state of up does not indicate the state of the routing function. Ensure that you are receiving routes over the BGP session.
awsDeviceV2 (string) --
The Direct Connection endpoint which the BGP peer terminates on.
region (string) --
The AWS region where the virtual interface is located.
Example: us-east-1
Default: None
awsDeviceV2 (string) --
The Direct Connection endpoint which the virtual interface terminates on.
Deletes a BGP peer on the specified virtual interface that matches the specified customer address and ASN. You cannot delete the last BGP peer from a virtual interface.
See also: AWS API Documentation
Request Syntax
response = client.delete_bgp_peer(
virtualInterfaceId='string',
asn=123,
customerAddress='string'
)
The ID of the virtual interface from which the BGP peer will be deleted.
Example: dxvif-456abc78
Default: None
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
dict
Response Syntax
{
'virtualInterface': {
'ownerAccount': 'string',
'virtualInterfaceId': 'string',
'location': 'string',
'connectionId': 'string',
'virtualInterfaceType': 'string',
'virtualInterfaceName': 'string',
'vlan': 123,
'asn': 123,
'amazonSideAsn': 123,
'authKey': 'string',
'amazonAddress': 'string',
'customerAddress': 'string',
'addressFamily': 'ipv4'|'ipv6',
'virtualInterfaceState': 'confirming'|'verifying'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'customerRouterConfig': 'string',
'virtualGatewayId': 'string',
'directConnectGatewayId': 'string',
'routeFilterPrefixes': [
{
'cidr': 'string'
},
],
'bgpPeers': [
{
'asn': 123,
'authKey': 'string',
'addressFamily': 'ipv4'|'ipv6',
'amazonAddress': 'string',
'customerAddress': 'string',
'bgpPeerState': 'verifying'|'pending'|'available'|'deleting'|'deleted',
'bgpStatus': 'up'|'down',
'awsDeviceV2': 'string'
},
],
'region': 'string',
'awsDeviceV2': 'string'
}
}
Response Structure
(dict) --
The response received when DeleteBGPPeer is called.
virtualInterface (dict) --
A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new virtual interface.
virtualInterfaceId (string) --
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
virtualInterfaceType (string) --
The type of virtual interface.
Example: private (Amazon VPC) or public (Amazon S3, Amazon DynamoDB, and so on.)
virtualInterfaceName (string) --
The name of the virtual interface assigned by the customer.
Example: "My VPC"
vlan (integer) --
The VLAN ID.
Example: 101
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
amazonSideAsn (integer) --
The autonomous system number (ASN) for the Amazon side of the connection.
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
addressFamily (string) --
Indicates the address family for the BGP peer.
virtualInterfaceState (string) --
State of the virtual interface.
customerRouterConfig (string) --
Information for generating the customer router configuration.
virtualGatewayId (string) --
The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces.
Example: vgw-123er56
directConnectGatewayId (string) --
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
routeFilterPrefixes (list) --
A list of routes to be advertised to the AWS network in this region (public virtual interface).
(dict) --
A route filter prefix that the customer can advertise through Border Gateway Protocol (BGP) over a public virtual interface.
cidr (string) --
CIDR notation for the advertised route. Multiple routes are separated by commas.
IPv6 CIDRs must be at least a /64 or shorter
Example: 10.10.10.0/24,10.10.11.0/24,2001:db8::/64
bgpPeers (list) --
A list of the BGP peers configured on this virtual interface.
(dict) --
A structure containing information about a BGP peer.
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
addressFamily (string) --
Indicates the address family for the BGP peer.
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
bgpPeerState (string) --
The state of the BGP peer.
bgpStatus (string) --
The Up/Down state of the BGP peer.
Note
A state of up does not indicate the state of the routing function. Ensure that you are receiving routes over the BGP session.
awsDeviceV2 (string) --
The Direct Connection endpoint which the BGP peer terminates on.
region (string) --
The AWS region where the virtual interface is located.
Example: us-east-1
Default: None
awsDeviceV2 (string) --
The Direct Connection endpoint which the virtual interface terminates on.
Deletes the connection.
Deleting a connection only stops the AWS Direct Connect port hour and data transfer charges. You need to cancel separately with the providers any services or charges for cross-connects or network circuits that connect you to the AWS Direct Connect location.
See also: AWS API Documentation
Request Syntax
response = client.delete_connection(
connectionId='string'
)
[REQUIRED]
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
}
Response Structure
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
The AWS account that will own the new connection.
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
The name of the connection.
Example: "My Connection to AWS "
Default: None
State of the connection.
The AWS region where the connection is located.
Example: us-east-1
Default: None
Where the connection is located.
Example: EqSV5
Default: None
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
The VLAN ID.
Example: 101
The name of the AWS Direct Connect service provider associated with the connection.
The time of the most recent call to DescribeLoa for this connection.
The ID of the LAG.
Example: dxlag-fg5678gh
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
The Direct Connection endpoint which the physical connection terminates on.
Deletes a direct connect gateway. You must first delete all virtual interfaces that are attached to the direct connect gateway and disassociate all virtual private gateways that are associated with the direct connect gateway.
See also: AWS API Documentation
Request Syntax
response = client.delete_direct_connect_gateway(
directConnectGatewayId='string'
)
[REQUIRED]
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
Default: None
{
'directConnectGateway': {
'directConnectGatewayId': 'string',
'directConnectGatewayName': 'string',
'amazonSideAsn': 123,
'ownerAccount': 'string',
'directConnectGatewayState': 'pending'|'available'|'deleting'|'deleted',
'stateChangeError': 'string'
}
}
Response Structure
Container for the response from the DeleteDirectConnectGateway API call
The direct connect gateway to be deleted.
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
The name of the direct connect gateway.
Example: "My direct connect gateway"
Default: None
The autonomous system number (ASN) for the Amazon side of the connection.
The AWS account ID of the owner of the direct connect gateway.
State of the direct connect gateway.
Error message when the state of an object fails to advance.
Deletes the association between a direct connect gateway and a virtual private gateway.
See also: AWS API Documentation
Request Syntax
response = client.delete_direct_connect_gateway_association(
directConnectGatewayId='string',
virtualGatewayId='string'
)
[REQUIRED]
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
Default: None
[REQUIRED]
The ID of the virtual private gateway.
Example: "vgw-abc123ef"
Default: None
dict
Response Syntax
{
'directConnectGatewayAssociation': {
'directConnectGatewayId': 'string',
'virtualGatewayId': 'string',
'virtualGatewayRegion': 'string',
'virtualGatewayOwnerAccount': 'string',
'associationState': 'associating'|'associated'|'disassociating'|'disassociated',
'stateChangeError': 'string'
}
}
Response Structure
(dict) --
Container for the response from the DeleteDirectConnectGatewayAssociation API call
directConnectGatewayAssociation (dict) --
The direct connect gateway association to be deleted.
directConnectGatewayId (string) --
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
virtualGatewayId (string) --
The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces.
Example: vgw-123er56
virtualGatewayRegion (string) --
The region in which the virtual private gateway is located.
Example: us-east-1
virtualGatewayOwnerAccount (string) --
The AWS account ID of the owner of the virtual private gateway.
associationState (string) --
State of the direct connect gateway association.
stateChangeError (string) --
Error message when the state of an object fails to advance.
Deletes the specified interconnect.
Note
This is intended for use by AWS Direct Connect partners only.
See also: AWS API Documentation
Request Syntax
response = client.delete_interconnect(
interconnectId='string'
)
[REQUIRED]
The ID of the interconnect.
Example: dxcon-abc123
{
'interconnectState': 'requested'|'pending'|'available'|'down'|'deleting'|'deleted'
}
Response Structure
The response received when DeleteInterconnect is called.
State of the interconnect.
Deletes a link aggregation group (LAG). You cannot delete a LAG if it has active virtual interfaces or hosted connections.
See also: AWS API Documentation
Request Syntax
response = client.delete_lag(
lagId='string'
)
[REQUIRED]
The ID of the LAG to delete.
Example: dxlag-abc123
Default: None
{
'connectionsBandwidth': 'string',
'numberOfConnections': 123,
'lagId': 'string',
'ownerAccount': 'string',
'lagName': 'string',
'lagState': 'requested'|'pending'|'available'|'down'|'deleting'|'deleted',
'location': 'string',
'region': 'string',
'minimumLinks': 123,
'awsDevice': 'string',
'awsDeviceV2': 'string',
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
},
],
'allowsHostedConnections': True|False
}
Response Structure
Describes a link aggregation group (LAG). A LAG is a connection that uses the Link Aggregation Control Protocol (LACP) to logically aggregate a bundle of physical connections. Like an interconnect, it can host other connections. All connections in a LAG must terminate on the same physical AWS Direct Connect endpoint, and must be the same bandwidth.
The individual bandwidth of the physical connections bundled by the LAG.
Available values: 1Gbps, 10Gbps
The number of physical connections bundled by the LAG, up to a maximum of 10.
The ID of the LAG.
Example: dxlag-fg5678gh
The owner of the LAG.
The name of the LAG.
The state of the LAG.
Where the connection is located.
Example: EqSV5
Default: None
The AWS region where the connection is located.
Example: us-east-1
Default: None
The minimum number of physical connections that must be operational for the LAG itself to be operational. If the number of operational connections drops below this setting, the LAG state changes to down . This value can help to ensure that a LAG is not overutilized if a significant number of its bundled connections go down.
Deprecated in favor of awsDeviceV2.
The AWS Direct Connection endpoint that hosts the LAG.
The AWS Direct Connection endpoint that hosts the LAG.
A list of connections bundled by this LAG.
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
The AWS account that will own the new connection.
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
The name of the connection.
Example: "My Connection to AWS "
Default: None
State of the connection.
The AWS region where the connection is located.
Example: us-east-1
Default: None
Where the connection is located.
Example: EqSV5
Default: None
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
The VLAN ID.
Example: 101
The name of the AWS Direct Connect service provider associated with the connection.
The time of the most recent call to DescribeLoa for this connection.
The ID of the LAG.
Example: dxlag-fg5678gh
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
The Direct Connection endpoint which the physical connection terminates on.
Indicates whether the LAG can host other connections.
Note
This is intended for use by AWS Direct Connect partners only.
Deletes a virtual interface.
See also: AWS API Documentation
Request Syntax
response = client.delete_virtual_interface(
virtualInterfaceId='string'
)
[REQUIRED]
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
{
'virtualInterfaceState': 'confirming'|'verifying'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected'
}
Response Structure
The response received when DeleteVirtualInterface is called.
State of the virtual interface.
Deprecated in favor of DescribeLoa .
Returns the LOA-CFA for a Connection.
The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that your APN partner or service provider uses when establishing your cross connect to AWS at the colocation facility. For more information, see Requesting Cross Connects at AWS Direct Connect Locations in the AWS Direct Connect user guide.
Danger
This operation is deprecated and may not function as expected. This operation should not be used going forward and is only kept for the purpose of backwards compatiblity.
See also: AWS API Documentation
Request Syntax
response = client.describe_connection_loa(
connectionId='string',
providerName='string',
loaContentType='application/pdf'
)
[REQUIRED]
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
The name of the APN partner or service provider who establishes connectivity on your behalf. If you supply this parameter, the LOA-CFA lists the provider name alongside your company name as the requester of the cross connect.
Default: None
A standard media type indicating the content type of the LOA-CFA document. Currently, the only supported value is "application/pdf".
Default: application/pdf
dict
Response Syntax
{
'loa': {
'loaContent': b'bytes',
'loaContentType': 'application/pdf'
}
}
Response Structure
(dict) --
The response received when DescribeConnectionLoa is called.
loa (dict) --
A structure containing the Letter of Authorization - Connecting Facility Assignment (LOA-CFA) for a connection.
loaContent (bytes) --
The binary contents of the LOA-CFA document.
loaContentType (string) --
A standard media type indicating the content type of the LOA-CFA document. Currently, the only supported value is "application/pdf".
Default: application/pdf
Displays all connections in this region.
If a connection ID is provided, the call returns only that particular connection.
See also: AWS API Documentation
Request Syntax
response = client.describe_connections(
connectionId='string'
)
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
{
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
},
]
}
Response Structure
A structure containing a list of connections.
A list of connections.
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
The AWS account that will own the new connection.
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
The name of the connection.
Example: "My Connection to AWS "
Default: None
State of the connection.
The AWS region where the connection is located.
Example: us-east-1
Default: None
Where the connection is located.
Example: EqSV5
Default: None
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
The VLAN ID.
Example: 101
The name of the AWS Direct Connect service provider associated with the connection.
The time of the most recent call to DescribeLoa for this connection.
The ID of the LAG.
Example: dxlag-fg5678gh
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
The Direct Connection endpoint which the physical connection terminates on.
Deprecated in favor of DescribeHostedConnections .
Returns a list of connections that have been provisioned on the given interconnect.
Note
This is intended for use by AWS Direct Connect partners only.
Danger
This operation is deprecated and may not function as expected. This operation should not be used going forward and is only kept for the purpose of backwards compatiblity.
See also: AWS API Documentation
Request Syntax
response = client.describe_connections_on_interconnect(
interconnectId='string'
)
[REQUIRED]
ID of the interconnect on which a list of connection is provisioned.
Example: dxcon-abc123
Default: None
{
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
},
]
}
Response Structure
A structure containing a list of connections.
A list of connections.
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
The AWS account that will own the new connection.
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
The name of the connection.
Example: "My Connection to AWS "
Default: None
State of the connection.
The AWS region where the connection is located.
Example: us-east-1
Default: None
Where the connection is located.
Example: EqSV5
Default: None
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
The VLAN ID.
Example: 101
The name of the AWS Direct Connect service provider associated with the connection.
The time of the most recent call to DescribeLoa for this connection.
The ID of the LAG.
Example: dxlag-fg5678gh
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
The Direct Connection endpoint which the physical connection terminates on.
Returns a list of all direct connect gateway and virtual private gateway (VGW) associations. Either a direct connect gateway ID or a VGW ID must be provided in the request. If a direct connect gateway ID is provided, the response returns all VGWs associated with the direct connect gateway. If a VGW ID is provided, the response returns all direct connect gateways associated with the VGW. If both are provided, the response only returns the association that matches both the direct connect gateway and the VGW.
See also: AWS API Documentation
Request Syntax
response = client.describe_direct_connect_gateway_associations(
directConnectGatewayId='string',
virtualGatewayId='string',
maxResults=123,
nextToken='string'
)
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
Default: None
The ID of the virtual private gateway.
Example: "vgw-abc123ef"
Default: None
The maximum number of direct connect gateway associations to return per page.
Example: 15
Default: None
The token provided in the previous describe result to retrieve the next page of the result.
Default: None
dict
Response Syntax
{
'directConnectGatewayAssociations': [
{
'directConnectGatewayId': 'string',
'virtualGatewayId': 'string',
'virtualGatewayRegion': 'string',
'virtualGatewayOwnerAccount': 'string',
'associationState': 'associating'|'associated'|'disassociating'|'disassociated',
'stateChangeError': 'string'
},
],
'nextToken': 'string'
}
Response Structure
(dict) --
Container for the response from the DescribeDirectConnectGatewayAssociations API call
directConnectGatewayAssociations (list) --
Information about the direct connect gateway associations.
(dict) --
The association between a direct connect gateway and virtual private gateway.
directConnectGatewayId (string) --
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
virtualGatewayId (string) --
The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces.
Example: vgw-123er56
virtualGatewayRegion (string) --
The region in which the virtual private gateway is located.
Example: us-east-1
virtualGatewayOwnerAccount (string) --
The AWS account ID of the owner of the virtual private gateway.
associationState (string) --
State of the direct connect gateway association.
stateChangeError (string) --
Error message when the state of an object fails to advance.
nextToken (string) --
Token to retrieve the next page of the result.
Returns a list of all direct connect gateway and virtual interface (VIF) attachments. Either a direct connect gateway ID or a VIF ID must be provided in the request. If a direct connect gateway ID is provided, the response returns all VIFs attached to the direct connect gateway. If a VIF ID is provided, the response returns all direct connect gateways attached to the VIF. If both are provided, the response only returns the attachment that matches both the direct connect gateway and the VIF.
See also: AWS API Documentation
Request Syntax
response = client.describe_direct_connect_gateway_attachments(
directConnectGatewayId='string',
virtualInterfaceId='string',
maxResults=123,
nextToken='string'
)
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
Default: None
The ID of the virtual interface.
Example: "dxvif-abc123ef"
Default: None
The maximum number of direct connect gateway attachments to return per page.
Example: 15
Default: None
The token provided in the previous describe result to retrieve the next page of the result.
Default: None
dict
Response Syntax
{
'directConnectGatewayAttachments': [
{
'directConnectGatewayId': 'string',
'virtualInterfaceId': 'string',
'virtualInterfaceRegion': 'string',
'virtualInterfaceOwnerAccount': 'string',
'attachmentState': 'attaching'|'attached'|'detaching'|'detached',
'stateChangeError': 'string'
},
],
'nextToken': 'string'
}
Response Structure
(dict) --
Container for the response from the DescribeDirectConnectGatewayAttachments API call
directConnectGatewayAttachments (list) --
Information about the direct connect gateway attachments.
(dict) --
The association between a direct connect gateway and virtual interface.
directConnectGatewayId (string) --
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
virtualInterfaceId (string) --
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
virtualInterfaceRegion (string) --
The region in which the virtual interface is located.
Example: us-east-1
virtualInterfaceOwnerAccount (string) --
The AWS account ID of the owner of the virtual interface.
attachmentState (string) --
State of the direct connect gateway attachment.
stateChangeError (string) --
Error message when the state of an object fails to advance.
nextToken (string) --
Token to retrieve the next page of the result.
Returns a list of direct connect gateways in your account. Deleted direct connect gateways are not returned. You can provide a direct connect gateway ID in the request to return information about the specific direct connect gateway only. Otherwise, if a direct connect gateway ID is not provided, information about all of your direct connect gateways is returned.
See also: AWS API Documentation
Request Syntax
response = client.describe_direct_connect_gateways(
directConnectGatewayId='string',
maxResults=123,
nextToken='string'
)
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
Default: None
The maximum number of direct connect gateways to return per page.
Example: 15
Default: None
The token provided in the previous describe result to retrieve the next page of the result.
Default: None
dict
Response Syntax
{
'directConnectGateways': [
{
'directConnectGatewayId': 'string',
'directConnectGatewayName': 'string',
'amazonSideAsn': 123,
'ownerAccount': 'string',
'directConnectGatewayState': 'pending'|'available'|'deleting'|'deleted',
'stateChangeError': 'string'
},
],
'nextToken': 'string'
}
Response Structure
(dict) --
Container for the response from the DescribeDirectConnectGateways API call
directConnectGateways (list) --
Information about the direct connect gateways.
(dict) --
A direct connect gateway is an intermediate object that enables you to connect virtual interfaces and virtual private gateways.
directConnectGatewayId (string) --
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
directConnectGatewayName (string) --
The name of the direct connect gateway.
Example: "My direct connect gateway"
Default: None
amazonSideAsn (integer) --
The autonomous system number (ASN) for the Amazon side of the connection.
ownerAccount (string) --
The AWS account ID of the owner of the direct connect gateway.
directConnectGatewayState (string) --
State of the direct connect gateway.
stateChangeError (string) --
Error message when the state of an object fails to advance.
nextToken (string) --
Token to retrieve the next page of the result.
Returns a list of hosted connections that have been provisioned on the given interconnect or link aggregation group (LAG).
Note
This is intended for use by AWS Direct Connect partners only.
See also: AWS API Documentation
Request Syntax
response = client.describe_hosted_connections(
connectionId='string'
)
[REQUIRED]
The ID of the interconnect or LAG on which the hosted connections are provisioned.
Example: dxcon-abc123 or dxlag-abc123
Default: None
{
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
},
]
}
Response Structure
A structure containing a list of connections.
A list of connections.
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
The AWS account that will own the new connection.
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
The name of the connection.
Example: "My Connection to AWS "
Default: None
State of the connection.
The AWS region where the connection is located.
Example: us-east-1
Default: None
Where the connection is located.
Example: EqSV5
Default: None
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
The VLAN ID.
Example: 101
The name of the AWS Direct Connect service provider associated with the connection.
The time of the most recent call to DescribeLoa for this connection.
The ID of the LAG.
Example: dxlag-fg5678gh
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
The Direct Connection endpoint which the physical connection terminates on.
Deprecated in favor of DescribeLoa .
Returns the LOA-CFA for an Interconnect.
The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to AWS at the colocation facility. For more information, see Requesting Cross Connects at AWS Direct Connect Locations in the AWS Direct Connect user guide.
Danger
This operation is deprecated and may not function as expected. This operation should not be used going forward and is only kept for the purpose of backwards compatiblity.
See also: AWS API Documentation
Request Syntax
response = client.describe_interconnect_loa(
interconnectId='string',
providerName='string',
loaContentType='application/pdf'
)
[REQUIRED]
The ID of the interconnect.
Example: dxcon-abc123
The name of the service provider who establishes connectivity on your behalf. If you supply this parameter, the LOA-CFA lists the provider name alongside your company name as the requester of the cross connect.
Default: None
A standard media type indicating the content type of the LOA-CFA document. Currently, the only supported value is "application/pdf".
Default: application/pdf
dict
Response Syntax
{
'loa': {
'loaContent': b'bytes',
'loaContentType': 'application/pdf'
}
}
Response Structure
(dict) --
The response received when DescribeInterconnectLoa is called.
loa (dict) --
A structure containing the Letter of Authorization - Connecting Facility Assignment (LOA-CFA) for a connection.
loaContent (bytes) --
The binary contents of the LOA-CFA document.
loaContentType (string) --
A standard media type indicating the content type of the LOA-CFA document. Currently, the only supported value is "application/pdf".
Default: application/pdf
Returns a list of interconnects owned by the AWS account.
If an interconnect ID is provided, it will only return this particular interconnect.
See also: AWS API Documentation
Request Syntax
response = client.describe_interconnects(
interconnectId='string'
)
The ID of the interconnect.
Example: dxcon-abc123
{
'interconnects': [
{
'interconnectId': 'string',
'interconnectName': 'string',
'interconnectState': 'requested'|'pending'|'available'|'down'|'deleting'|'deleted',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
},
]
}
Response Structure
A structure containing a list of interconnects.
A list of interconnects.
An interconnect is a connection that can host other connections.
Like a standard AWS Direct Connect connection, an interconnect represents the physical connection between an AWS Direct Connect partner's network and a specific Direct Connect location. An AWS Direct Connect partner who owns an interconnect can provision hosted connections on the interconnect for their end customers, thereby providing the end customers with connectivity to AWS services.
The resources of the interconnect, including bandwidth and VLAN numbers, are shared by all of the hosted connections on the interconnect, and the owner of the interconnect determines how these resources are assigned.
The ID of the interconnect.
Example: dxcon-abc123
The name of the interconnect.
Example: "1G Interconnect to AWS "
State of the interconnect.
The AWS region where the connection is located.
Example: us-east-1
Default: None
Where the connection is located.
Example: EqSV5
Default: None
Bandwidth of the connection.
Example: 1Gbps
Default: None
The time of the most recent call to DescribeInterconnectLoa for this Interconnect.
The ID of the LAG.
Example: dxlag-fg5678gh
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
The Direct Connection endpoint which the physical connection terminates on.
Describes the link aggregation groups (LAGs) in your account.
If a LAG ID is provided, only information about the specified LAG is returned.
See also: AWS API Documentation
Request Syntax
response = client.describe_lags(
lagId='string'
)
The ID of the LAG.
Example: dxlag-abc123
Default: None
{
'lags': [
{
'connectionsBandwidth': 'string',
'numberOfConnections': 123,
'lagId': 'string',
'ownerAccount': 'string',
'lagName': 'string',
'lagState': 'requested'|'pending'|'available'|'down'|'deleting'|'deleted',
'location': 'string',
'region': 'string',
'minimumLinks': 123,
'awsDevice': 'string',
'awsDeviceV2': 'string',
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
},
],
'allowsHostedConnections': True|False
},
]
}
Response Structure
A structure containing a list of LAGs.
A list of LAGs.
Describes a link aggregation group (LAG). A LAG is a connection that uses the Link Aggregation Control Protocol (LACP) to logically aggregate a bundle of physical connections. Like an interconnect, it can host other connections. All connections in a LAG must terminate on the same physical AWS Direct Connect endpoint, and must be the same bandwidth.
The individual bandwidth of the physical connections bundled by the LAG.
Available values: 1Gbps, 10Gbps
The number of physical connections bundled by the LAG, up to a maximum of 10.
The ID of the LAG.
Example: dxlag-fg5678gh
The owner of the LAG.
The name of the LAG.
The state of the LAG.
Where the connection is located.
Example: EqSV5
Default: None
The AWS region where the connection is located.
Example: us-east-1
Default: None
The minimum number of physical connections that must be operational for the LAG itself to be operational. If the number of operational connections drops below this setting, the LAG state changes to down . This value can help to ensure that a LAG is not overutilized if a significant number of its bundled connections go down.
Deprecated in favor of awsDeviceV2.
The AWS Direct Connection endpoint that hosts the LAG.
The AWS Direct Connection endpoint that hosts the LAG.
A list of connections bundled by this LAG.
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
The AWS account that will own the new connection.
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
The name of the connection.
Example: "My Connection to AWS "
Default: None
State of the connection.
The AWS region where the connection is located.
Example: us-east-1
Default: None
Where the connection is located.
Example: EqSV5
Default: None
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
The VLAN ID.
Example: 101
The name of the AWS Direct Connect service provider associated with the connection.
The time of the most recent call to DescribeLoa for this connection.
The ID of the LAG.
Example: dxlag-fg5678gh
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
The Direct Connection endpoint which the physical connection terminates on.
Indicates whether the LAG can host other connections.
Note
This is intended for use by AWS Direct Connect partners only.
Returns the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).
The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to AWS at the colocation facility. For more information, see Requesting Cross Connects at AWS Direct Connect Locations in the AWS Direct Connect user guide.
See also: AWS API Documentation
Request Syntax
response = client.describe_loa(
connectionId='string',
providerName='string',
loaContentType='application/pdf'
)
[REQUIRED]
The ID of a connection, LAG, or interconnect for which to get the LOA-CFA information.
Example: dxcon-abc123 or dxlag-abc123
Default: None
The name of the service provider who establishes connectivity on your behalf. If you supply this parameter, the LOA-CFA lists the provider name alongside your company name as the requester of the cross connect.
Default: None
A standard media type indicating the content type of the LOA-CFA document. Currently, the only supported value is "application/pdf".
Default: application/pdf
dict
Response Syntax
{
'loaContent': b'bytes',
'loaContentType': 'application/pdf'
}
Response Structure
(dict) --
A structure containing the Letter of Authorization - Connecting Facility Assignment (LOA-CFA) for a connection.
loaContent (bytes) --
The binary contents of the LOA-CFA document.
loaContentType (string) --
A standard media type indicating the content type of the LOA-CFA document. Currently, the only supported value is "application/pdf".
Default: application/pdf
Returns the list of AWS Direct Connect locations in the current AWS region. These are the locations that may be selected when calling CreateConnection or CreateInterconnect .
See also: AWS API Documentation
Request Syntax
response = client.describe_locations()
{
'locations': [
{
'locationCode': 'string',
'locationName': 'string',
'region': 'string'
},
]
}
Response Structure
A location is a network facility where AWS Direct Connect routers are available to be connected. Generally, these are colocation hubs where many network providers have equipment, and where cross connects can be delivered. Locations include a name and facility code, and must be provided when creating a connection.
A list of colocation hubs where network providers have equipment. Most regions have multiple locations available.
An AWS Direct Connect location where connections and interconnects can be requested.
The code used to indicate the AWS Direct Connect location.
The name of the AWS Direct Connect location. The name includes the colocation partner name and the physical site of the lit building.
The AWS region where the AWS Direct connect location is located.
Example: us-east-1
Default: None
Describes the tags associated with the specified Direct Connect resources.
See also: AWS API Documentation
Request Syntax
response = client.describe_tags(
resourceArns=[
'string',
]
)
[REQUIRED]
The Amazon Resource Names (ARNs) of the Direct Connect resources.
{
'resourceTags': [
{
'resourceArn': 'string',
'tags': [
{
'key': 'string',
'value': 'string'
},
]
},
]
}
Response Structure
The response received when DescribeTags is called.
Information about the tags.
The tags associated with a Direct Connect resource.
The Amazon Resource Name (ARN) of the Direct Connect resource.
The tags.
Information about a tag.
The key of the tag.
The value of the tag.
Returns a list of virtual private gateways owned by the AWS account.
You can create one or more AWS Direct Connect private virtual interfaces linking to a virtual private gateway. A virtual private gateway can be managed via Amazon Virtual Private Cloud (VPC) console or the EC2 CreateVpnGateway action.
See also: AWS API Documentation
Request Syntax
response = client.describe_virtual_gateways()
{
'virtualGateways': [
{
'virtualGatewayId': 'string',
'virtualGatewayState': 'string'
},
]
}
Response Structure
A structure containing a list of virtual private gateways.
A list of virtual private gateways.
You can create one or more AWS Direct Connect private virtual interfaces linking to your virtual private gateway.
Virtual private gateways can be managed using the Amazon Virtual Private Cloud (Amazon VPC) console or the Amazon EC2 CreateVpnGateway action .
The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces.
Example: vgw-123er56
State of the virtual private gateway.
Displays all virtual interfaces for an AWS account. Virtual interfaces deleted fewer than 15 minutes before you make the request are also returned. If you specify a connection ID, only the virtual interfaces associated with the connection are returned. If you specify a virtual interface ID, then only a single virtual interface is returned.
A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect location and the customer.
See also: AWS API Documentation
Request Syntax
response = client.describe_virtual_interfaces(
connectionId='string',
virtualInterfaceId='string'
)
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
dict
Response Syntax
{
'virtualInterfaces': [
{
'ownerAccount': 'string',
'virtualInterfaceId': 'string',
'location': 'string',
'connectionId': 'string',
'virtualInterfaceType': 'string',
'virtualInterfaceName': 'string',
'vlan': 123,
'asn': 123,
'amazonSideAsn': 123,
'authKey': 'string',
'amazonAddress': 'string',
'customerAddress': 'string',
'addressFamily': 'ipv4'|'ipv6',
'virtualInterfaceState': 'confirming'|'verifying'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'customerRouterConfig': 'string',
'virtualGatewayId': 'string',
'directConnectGatewayId': 'string',
'routeFilterPrefixes': [
{
'cidr': 'string'
},
],
'bgpPeers': [
{
'asn': 123,
'authKey': 'string',
'addressFamily': 'ipv4'|'ipv6',
'amazonAddress': 'string',
'customerAddress': 'string',
'bgpPeerState': 'verifying'|'pending'|'available'|'deleting'|'deleted',
'bgpStatus': 'up'|'down',
'awsDeviceV2': 'string'
},
],
'region': 'string',
'awsDeviceV2': 'string'
},
]
}
Response Structure
(dict) --
A structure containing a list of virtual interfaces.
virtualInterfaces (list) --
A list of virtual interfaces.
(dict) --
A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new virtual interface.
virtualInterfaceId (string) --
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
virtualInterfaceType (string) --
The type of virtual interface.
Example: private (Amazon VPC) or public (Amazon S3, Amazon DynamoDB, and so on.)
virtualInterfaceName (string) --
The name of the virtual interface assigned by the customer.
Example: "My VPC"
vlan (integer) --
The VLAN ID.
Example: 101
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
amazonSideAsn (integer) --
The autonomous system number (ASN) for the Amazon side of the connection.
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
addressFamily (string) --
Indicates the address family for the BGP peer.
virtualInterfaceState (string) --
State of the virtual interface.
customerRouterConfig (string) --
Information for generating the customer router configuration.
virtualGatewayId (string) --
The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces.
Example: vgw-123er56
directConnectGatewayId (string) --
The ID of the direct connect gateway.
Example: "abcd1234-dcba-5678-be23-cdef9876ab45"
routeFilterPrefixes (list) --
A list of routes to be advertised to the AWS network in this region (public virtual interface).
(dict) --
A route filter prefix that the customer can advertise through Border Gateway Protocol (BGP) over a public virtual interface.
cidr (string) --
CIDR notation for the advertised route. Multiple routes are separated by commas.
IPv6 CIDRs must be at least a /64 or shorter
Example: 10.10.10.0/24,10.10.11.0/24,2001:db8::/64
bgpPeers (list) --
A list of the BGP peers configured on this virtual interface.
(dict) --
A structure containing information about a BGP peer.
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
addressFamily (string) --
Indicates the address family for the BGP peer.
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
bgpPeerState (string) --
The state of the BGP peer.
bgpStatus (string) --
The Up/Down state of the BGP peer.
Note
A state of up does not indicate the state of the routing function. Ensure that you are receiving routes over the BGP session.
awsDeviceV2 (string) --
The Direct Connection endpoint which the BGP peer terminates on.
region (string) --
The AWS region where the virtual interface is located.
Example: us-east-1
Default: None
awsDeviceV2 (string) --
The Direct Connection endpoint which the virtual interface terminates on.
Disassociates a connection from a link aggregation group (LAG). The connection is interrupted and re-established as a standalone connection (the connection is not deleted; to delete the connection, use the DeleteConnection request). If the LAG has associated virtual interfaces or hosted connections, they remain associated with the LAG. A disassociated connection owned by an AWS Direct Connect partner is automatically converted to an interconnect.
If disassociating the connection will cause the LAG to fall below its setting for minimum number of operational connections, the request fails, except when it's the last member of the LAG. If all connections are disassociated, the LAG continues to exist as an empty LAG with no physical connections.
See also: AWS API Documentation
Request Syntax
response = client.disassociate_connection_from_lag(
connectionId='string',
lagId='string'
)
[REQUIRED]
The ID of the connection to disassociate from the LAG.
Example: dxcon-abc123
Default: None
[REQUIRED]
The ID of the LAG.
Example: dxlag-abc123
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS "
Default: None
connectionState (string) --
State of the connection.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
awsDeviceV2 (string) --
The Direct Connection endpoint which the physical connection terminates on.
Generate a presigned url given a client, its method, and arguments
The presigned url
Create a paginator for an operation.
Returns an object that can wait for some condition.
Adds the specified tags to the specified Direct Connect resource. Each Direct Connect resource can have a maximum of 50 tags.
Each tag consists of a key and an optional value. If a tag with the same key is already associated with the Direct Connect resource, this action updates its value.
See also: AWS API Documentation
Request Syntax
response = client.tag_resource(
resourceArn='string',
tags=[
{
'key': 'string',
'value': 'string'
},
]
)
[REQUIRED]
The Amazon Resource Name (ARN) of the Direct Connect resource.
Example: arn:aws:directconnect:us-east-1:123456789012:dxcon/dxcon-fg5678gh
[REQUIRED]
The list of tags to add.
Information about a tag.
The key of the tag.
The value of the tag.
dict
Response Syntax
{}
Response Structure
(dict) --
The response received when TagResource is called.
Removes one or more tags from the specified Direct Connect resource.
See also: AWS API Documentation
Request Syntax
response = client.untag_resource(
resourceArn='string',
tagKeys=[
'string',
]
)
[REQUIRED]
The Amazon Resource Name (ARN) of the Direct Connect resource.
[REQUIRED]
The list of tag keys to remove.
dict
Response Syntax
{}
Response Structure
(dict) --
The response received when UntagResource is called.
Updates the attributes of a link aggregation group (LAG).
You can update the following attributes:
When you create a LAG, the default value for the minimum number of operational connections is zero (0). If you update this value, and the number of operational connections falls below the specified value, the LAG will automatically go down to avoid overutilization of the remaining connections. Adjusting this value should be done with care as it could force the LAG down if the value is set higher than the current number of operational connections.
See also: AWS API Documentation
Request Syntax
response = client.update_lag(
lagId='string',
lagName='string',
minimumLinks=123
)
[REQUIRED]
The ID of the LAG to update.
Example: dxlag-abc123
Default: None
The name for the LAG.
Example: "3x10G LAG to AWS "
Default: None
The minimum number of physical connections that must be operational for the LAG itself to be operational.
Default: None
dict
Response Syntax
{
'connectionsBandwidth': 'string',
'numberOfConnections': 123,
'lagId': 'string',
'ownerAccount': 'string',
'lagName': 'string',
'lagState': 'requested'|'pending'|'available'|'down'|'deleting'|'deleted',
'location': 'string',
'region': 'string',
'minimumLinks': 123,
'awsDevice': 'string',
'awsDeviceV2': 'string',
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string',
'awsDeviceV2': 'string'
},
],
'allowsHostedConnections': True|False
}
Response Structure
(dict) --
Describes a link aggregation group (LAG). A LAG is a connection that uses the Link Aggregation Control Protocol (LACP) to logically aggregate a bundle of physical connections. Like an interconnect, it can host other connections. All connections in a LAG must terminate on the same physical AWS Direct Connect endpoint, and must be the same bandwidth.
connectionsBandwidth (string) --
The individual bandwidth of the physical connections bundled by the LAG.
Available values: 1Gbps, 10Gbps
numberOfConnections (integer) --
The number of physical connections bundled by the LAG, up to a maximum of 10.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
ownerAccount (string) --
The owner of the LAG.
lagName (string) --
The name of the LAG.
lagState (string) --
The state of the LAG.
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
minimumLinks (integer) --
The minimum number of physical connections that must be operational for the LAG itself to be operational. If the number of operational connections drops below this setting, the LAG state changes to down . This value can help to ensure that a LAG is not overutilized if a significant number of its bundled connections go down.
awsDevice (string) --
Deprecated in favor of awsDeviceV2.
The AWS Direct Connection endpoint that hosts the LAG.
awsDeviceV2 (string) --
The AWS Direct Connection endpoint that hosts the LAG.
connections (list) --
A list of connections bundled by this LAG.
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS "
Default: None
connectionState (string) --
State of the connection.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
Deprecated in favor of awsDeviceV2.
The Direct Connection endpoint which the physical connection terminates on.
awsDeviceV2 (string) --
The Direct Connection endpoint which the physical connection terminates on.
allowsHostedConnections (boolean) --
Indicates whether the LAG can host other connections.
Note
This is intended for use by AWS Direct Connect partners only.
The available paginators are: