Table of Contents
A low-level client representing AWS OpsWorks:
client = session.create_client('opsworks')
These are the available methods:
Assign a registered instance to a layer.
Required Permissions : To use this action, an AWS Identity and Access Management (IAM) user must have a Manage permissions level for the stack or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.assign_instance(
InstanceId='string',
LayerIds=[
'string',
]
)
[REQUIRED]
The instance ID.
[REQUIRED]
The layer ID, which must correspond to a custom layer. You cannot assign a registered instance to a built-in layer.
None
Assigns one of the stack's registered Amazon EBS volumes to a specified instance. The volume must first be registered with the stack by calling RegisterVolume . After you register the volume, you must call UpdateVolume to specify a mount point before calling AssignVolume . For more information, see Resource Management .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.assign_volume(
VolumeId='string',
InstanceId='string'
)
[REQUIRED]
The volume ID.
None
Associates one of the stack's registered Elastic IP addresses with a specified instance. The address must first be registered with the stack by calling RegisterElasticIp . For more information, see Resource Management .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.associate_elastic_ip(
ElasticIp='string',
InstanceId='string'
)
[REQUIRED]
The Elastic IP address.
None
Attaches an Elastic Load Balancing load balancer to a specified layer. AWS OpsWorks Stacks does not support Application Load Balancer. You can only use Classic Load Balancer with AWS OpsWorks Stacks. For more information, see Elastic Load Balancing .
Note
You must create the Elastic Load Balancing instance separately, by using the Elastic Load Balancing console, API, or CLI. For more information, see Elastic Load Balancing Developer Guide .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.attach_elastic_load_balancer(
ElasticLoadBalancerName='string',
LayerId='string'
)
[REQUIRED]
The Elastic Load Balancing instance's name.
[REQUIRED]
The ID of the layer to which the Elastic Load Balancing instance is to be attached.
None
Check if an operation can be paginated.
Creates a clone of a specified stack. For more information, see Clone a Stack . By default, all parameters are set to the values used by the parent stack.
Required Permissions : To use this action, an IAM user must have an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.clone_stack(
SourceStackId='string',
Name='string',
Region='string',
VpcId='string',
Attributes={
'string': 'string'
},
ServiceRoleArn='string',
DefaultInstanceProfileArn='string',
DefaultOs='string',
HostnameTheme='string',
DefaultAvailabilityZone='string',
DefaultSubnetId='string',
CustomJson='string',
ConfigurationManager={
'Name': 'string',
'Version': 'string'
},
ChefConfiguration={
'ManageBerkshelf': True|False,
'BerkshelfVersion': 'string'
},
UseCustomCookbooks=True|False,
UseOpsworksSecurityGroups=True|False,
CustomCookbooksSource={
'Type': 'git'|'svn'|'archive'|'s3',
'Url': 'string',
'Username': 'string',
'Password': 'string',
'SshKey': 'string',
'Revision': 'string'
},
DefaultSshKeyName='string',
ClonePermissions=True|False,
CloneAppIds=[
'string',
],
DefaultRootDeviceType='ebs'|'instance-store',
AgentVersion='string'
)
[REQUIRED]
The source stack ID.
The ID of the VPC that the cloned stack is to be launched into. It must be in the specified region. All instances are launched into this VPC, and you cannot change the ID later.
If the VPC ID corresponds to a default VPC and you have specified either the DefaultAvailabilityZone or the DefaultSubnetId parameter only, AWS OpsWorks Stacks infers the value of the other parameter. If you specify neither parameter, AWS OpsWorks Stacks sets these parameters to the first valid Availability Zone for the specified region and the corresponding default VPC subnet ID, respectively.
If you specify a nondefault VPC ID, note the following:
For more information about how to use AWS OpsWorks Stacks with a VPC, see Running a Stack in a VPC . For more information about default VPC and EC2 Classic, see Supported Platforms .
A list of stack attributes and values as key/value pairs to be added to the cloned stack.
[REQUIRED]
The stack AWS Identity and Access Management (IAM) role, which allows AWS OpsWorks Stacks to work with AWS resources on your behalf. You must set this parameter to the Amazon Resource Name (ARN) for an existing IAM role. If you create a stack by using the AWS OpsWorks Stacks console, it creates the role for you. You can obtain an existing stack's IAM ARN programmatically by calling DescribePermissions . For more information about IAM ARNs, see Using Identifiers .
Note
You must set this parameter to a valid service role ARN or the action will fail; there is no default value. You can specify the source stack's service role ARN, if you prefer, but you must do so explicitly.
The stack's operating system, which must be set to one of the following.
The default option is the parent stack's operating system. For more information about supported operating systems, see AWS OpsWorks Stacks Operating Systems .
Note
You can specify a different Linux operating system for the cloned stack, but you cannot change from Linux to Windows or Windows to Linux.
The stack's host name theme, with spaces are replaced by underscores. The theme is used to generate host names for the stack's instances. By default, HostnameTheme is set to Layer_Dependent , which creates host names by appending integers to the layer's short name. The other themes are:
To obtain a generated host name, call GetHostNameSuggestion , which returns a host name based on the current theme.
A string that contains user-defined, custom JSON. It is used to override the corresponding default stack configuration JSON values. The string should be in the following format:
"{\"key1\": \"value1\", \"key2\": \"value2\",...}"
For more information about custom JSON, see Use Custom JSON to Modify the Stack Configuration Attributes
The configuration manager. When you clone a stack we recommend that you use the configuration manager to specify the Chef version: 12, 11.10, or 11.4 for Linux stacks, or 12.2 for Windows stacks. The default value for Linux stacks is currently 12.
The name. This parameter must be set to "Chef".
The Chef version. This parameter must be set to 12, 11.10, or 11.4 for Linux stacks, and to 12.2 for Windows stacks. The default value for Linux stacks is 11.4.
A ChefConfiguration object that specifies whether to enable Berkshelf and the Berkshelf version on Chef 11.10 stacks. For more information, see Create a New Stack .
Whether to enable Berkshelf.
The Berkshelf version.
Whether to associate the AWS OpsWorks Stacks built-in security groups with the stack's layers.
AWS OpsWorks Stacks provides a standard set of built-in security groups, one for each layer, which are associated with layers by default. With UseOpsworksSecurityGroups you can instead provide your own custom security groups. UseOpsworksSecurityGroups has the following settings:
For more information, see Create a New Stack .
Contains the information required to retrieve an app or cookbook from a repository. For more information, see Creating Apps or Custom Recipes and Cookbooks .
The repository type.
The source URL. The following is an example of an Amazon S3 source URL: https://s3.amazonaws.com/opsworks-demo-bucket/opsworks_cookbook_demo.tar.gz .
This parameter depends on the repository type.
When included in a request, the parameter depends on the repository type.
For more information on how to safely handle IAM credentials, see http://docs.aws.amazon.com/general/latest/gr/aws-access-keys-best-practices.html .
In responses, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
In requests, the repository's SSH key.
In responses, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
The application's version. AWS OpsWorks Stacks enables you to easily deploy new versions of an application. One of the simplest approaches is to have branches or revisions in your repository that represent different versions that can potentially be deployed.
A list of source stack app IDs to be included in the cloned stack.
The default AWS OpsWorks Stacks agent version. You have the following options:
The default setting is LATEST . To specify an agent version, you must use the complete version number, not the abbreviated number shown on the console. For a list of available agent version numbers, call DescribeAgentVersions . AgentVersion cannot be set to Chef 12.2.
Note
You can also specify an agent version when you create or update an instance, which overrides the stack's default setting.
dict
Response Syntax
{
'StackId': 'string'
}
Response Structure
(dict) --
Contains the response to a CloneStack request.
StackId (string) --
The cloned stack ID.
Creates an app for a specified stack. For more information, see Creating Apps .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.create_app(
StackId='string',
Shortname='string',
Name='string',
Description='string',
DataSources=[
{
'Type': 'string',
'Arn': 'string',
'DatabaseName': 'string'
},
],
Type='aws-flow-ruby'|'java'|'rails'|'php'|'nodejs'|'static'|'other',
AppSource={
'Type': 'git'|'svn'|'archive'|'s3',
'Url': 'string',
'Username': 'string',
'Password': 'string',
'SshKey': 'string',
'Revision': 'string'
},
Domains=[
'string',
],
EnableSsl=True|False,
SslConfiguration={
'Certificate': 'string',
'PrivateKey': 'string',
'Chain': 'string'
},
Attributes={
'string': 'string'
},
Environment=[
{
'Key': 'string',
'Value': 'string',
'Secure': True|False
},
]
)
[REQUIRED]
The stack ID.
[REQUIRED]
The app name.
The app's data source.
Describes an app's data source.
The data source's type, AutoSelectOpsworksMysqlInstance , OpsworksMysqlInstance , RdsDbInstance , or None .
The data source's ARN.
The database name.
[REQUIRED]
The app type. Each supported type is associated with a particular layer. For example, PHP applications are associated with a PHP layer. AWS OpsWorks Stacks deploys an application to those instances that are members of the corresponding layer. If your app isn't one of the standard types, or you prefer to implement your own Deploy recipes, specify other .
A Source object that specifies the app repository.
The repository type.
The source URL. The following is an example of an Amazon S3 source URL: https://s3.amazonaws.com/opsworks-demo-bucket/opsworks_cookbook_demo.tar.gz .
This parameter depends on the repository type.
When included in a request, the parameter depends on the repository type.
For more information on how to safely handle IAM credentials, see http://docs.aws.amazon.com/general/latest/gr/aws-access-keys-best-practices.html .
In responses, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
In requests, the repository's SSH key.
In responses, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
The application's version. AWS OpsWorks Stacks enables you to easily deploy new versions of an application. One of the simplest approaches is to have branches or revisions in your repository that represent different versions that can potentially be deployed.
The app virtual host settings, with multiple domains separated by commas. For example: 'www.example.com, example.com'
An SslConfiguration object with the SSL configuration.
The contents of the certificate's domain.crt file.
The private key; the contents of the certificate's domain.kex file.
Optional. Can be used to specify an intermediate certificate authority key or client authentication.
One or more user-defined key/value pairs to be added to the stack attributes.
An array of EnvironmentVariable objects that specify environment variables to be associated with the app. After you deploy the app, these variables are defined on the associated app server instance. For more information, see Environment Variables .
There is no specific limit on the number of environment variables. However, the size of the associated data structure - which includes the variables' names, values, and protected flag values - cannot exceed 10 KB (10240 Bytes). This limit should accommodate most if not all use cases. Exceeding it will cause an exception with the message, "Environment: is too large (maximum is 10KB)."
Note
This parameter is supported only by Chef 11.10 stacks. If you have specified one or more environment variables, you cannot modify the stack's Chef version.
Represents an app's environment variable.
(Required) The environment variable's name, which can consist of up to 64 characters and must be specified. The name can contain upper- and lowercase letters, numbers, and underscores (_), but it must start with a letter or underscore.
(Optional) The environment variable's value, which can be left empty. If you specify a value, it can contain up to 256 characters, which must all be printable.
(Optional) Whether the variable's value will be returned by the DescribeApps action. To conceal an environment variable's value, set Secure to true . DescribeApps then returns *****FILTERED***** instead of the actual value. The default value for Secure is false .
dict
Response Syntax
{
'AppId': 'string'
}
Response Structure
(dict) --
Contains the response to a CreateApp request.
AppId (string) --
The app ID.
Runs deployment or stack commands. For more information, see Deploying Apps and Run Stack Commands .
Required Permissions : To use this action, an IAM user must have a Deploy or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.create_deployment(
StackId='string',
AppId='string',
InstanceIds=[
'string',
],
LayerIds=[
'string',
],
Command={
'Name': 'install_dependencies'|'update_dependencies'|'update_custom_cookbooks'|'execute_recipes'|'configure'|'setup'|'deploy'|'rollback'|'start'|'stop'|'restart'|'undeploy',
'Args': {
'string': [
'string',
]
}
},
Comment='string',
CustomJson='string'
)
[REQUIRED]
The stack ID.
The instance IDs for the deployment targets.
The layer IDs for the deployment targets.
[REQUIRED]
A DeploymentCommand object that specifies the deployment command and any associated arguments.
Specifies the operation. You can specify only one command.
For stacks, the following commands are available:
Note
The update_dependencies and install_dependencies commands are supported only for Linux instances. You can run the commands successfully on Windows instances, but they do nothing.
For apps, the following commands are available:
The arguments of those commands that take arguments. It should be set to a JSON object with the following format:
{"arg_name1" : ["value1", "value2", ...], "arg_name2" : ["value1", "value2", ...], ...}
The update_dependencies command takes two arguments:
For example, to upgrade an instance to Amazon Linux 2016.09, set Args to the following.
{ "upgrade_os_to":["Amazon Linux 2016.09"], "allow_reboot":["true"] }
A string that contains user-defined, custom JSON. It is used to override the corresponding default stack configuration JSON values. The string should be in the following format:
"{\"key1\": \"value1\", \"key2\": \"value2\",...}"
For more information about custom JSON, see Use Custom JSON to Modify the Stack Configuration Attributes .
dict
Response Syntax
{
'DeploymentId': 'string'
}
Response Structure
(dict) --
Contains the response to a CreateDeployment request.
DeploymentId (string) --
The deployment ID, which can be used with other requests to identify the deployment.
Creates an instance in a specified stack. For more information, see Adding an Instance to a Layer .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.create_instance(
StackId='string',
LayerIds=[
'string',
],
InstanceType='string',
AutoScalingType='load'|'timer',
Hostname='string',
Os='string',
AmiId='string',
SshKeyName='string',
AvailabilityZone='string',
VirtualizationType='string',
SubnetId='string',
Architecture='x86_64'|'i386',
RootDeviceType='ebs'|'instance-store',
BlockDeviceMappings=[
{
'DeviceName': 'string',
'NoDevice': 'string',
'VirtualName': 'string',
'Ebs': {
'SnapshotId': 'string',
'Iops': 123,
'VolumeSize': 123,
'VolumeType': 'gp2'|'io1'|'standard',
'DeleteOnTermination': True|False
}
},
],
InstallUpdatesOnBoot=True|False,
EbsOptimized=True|False,
AgentVersion='string',
Tenancy='string'
)
[REQUIRED]
The stack ID.
[REQUIRED]
An array that contains the instance's layer IDs.
[REQUIRED]
The instance type, such as t2.micro . For a list of supported instance types, open the stack in the console, choose Instances , and choose + Instance . The Size list contains the currently supported types. For more information, see Instance Families and Types . The parameter values that you use to specify the various types are in the API Name column of the Available Instance Types table.
The instance's operating system, which must be set to one of the following.
For more information about the supported operating systems, see AWS OpsWorks Stacks Operating Systems .
The default option is the current Amazon Linux version. If you set this parameter to Custom , you must use the CreateInstance action's AmiId parameter to specify the custom AMI that you want to use. Block device mappings are not supported if the value is Custom . For more information about supported operating systems, see Operating Systems For more information about how to use custom AMIs with AWS OpsWorks Stacks, see Using Custom AMIs .
A custom AMI ID to be used to create the instance. The AMI should be based on one of the supported operating systems. For more information, see Using Custom AMIs .
Note
If you specify a custom AMI, you must set Os to Custom .
An array of BlockDeviceMapping objects that specify the instance's block devices. For more information, see Block Device Mapping . Note that block device mappings are not supported for custom AMIs.
Describes a block device mapping. This data type maps directly to the Amazon EC2 BlockDeviceMapping data type.
The device name that is exposed to the instance, such as /dev/sdh . For the root device, you can use the explicit device name or you can set this parameter to ROOT_DEVICE and AWS OpsWorks Stacks will provide the correct device name.
Suppresses the specified device included in the AMI's block device mapping.
The virtual device name. For more information, see BlockDeviceMapping .
An EBSBlockDevice that defines how to configure an Amazon EBS volume when the instance is launched.
The snapshot ID.
The number of I/O operations per second (IOPS) that the volume supports. For more information, see EbsBlockDevice .
The volume size, in GiB. For more information, see EbsBlockDevice .
The volume type. gp2 for General Purpose (SSD) volumes, io1 for Provisioned IOPS (SSD) volumes, st1 for Throughput Optimized hard disk drives (HDD), sc1 for Cold HDD,and standard for Magnetic volumes.
If you specify the io1 volume type, you must also specify a value for the Iops attribute. The maximum ratio of provisioned IOPS to requested volume size (in GiB) is 50:1. AWS uses the default volume size (in GiB) specified in the AMI attributes to set IOPS to 50 x (volume size).
Whether the volume is deleted on instance termination.
Whether to install operating system and package updates when the instance boots. The default value is true . To control when updates are installed, set this value to false . You must then update your instances manually by using CreateDeployment to run the update_dependencies stack command or by manually running yum (Amazon Linux) or apt-get (Ubuntu) on the instances.
Note
We strongly recommend using the default value of true to ensure that your instances have the latest security updates.
The default AWS OpsWorks Stacks agent version. You have the following options:
The default setting is INHERIT . To specify an agent version, you must use the complete version number, not the abbreviated number shown on the console. For a list of available agent version numbers, call DescribeAgentVersions . AgentVersion cannot be set to Chef 12.2.
dict
Response Syntax
{
'InstanceId': 'string'
}
Response Structure
(dict) --
Contains the response to a CreateInstance request.
InstanceId (string) --
The instance ID.
Creates a layer. For more information, see How to Create a Layer .
Note
You should use CreateLayer for noncustom layer types such as PHP App Server only if the stack does not have an existing layer of that type. A stack can have at most one instance of each noncustom layer; if you attempt to create a second instance, CreateLayer fails. A stack can have an arbitrary number of custom layers, so you can call CreateLayer as many times as you like for that layer type.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.create_layer(
StackId='string',
Type='aws-flow-ruby'|'ecs-cluster'|'java-app'|'lb'|'web'|'php-app'|'rails-app'|'nodejs-app'|'memcached'|'db-master'|'monitoring-master'|'custom',
Name='string',
Shortname='string',
Attributes={
'string': 'string'
},
CloudWatchLogsConfiguration={
'Enabled': True|False,
'LogStreams': [
{
'LogGroupName': 'string',
'DatetimeFormat': 'string',
'TimeZone': 'LOCAL'|'UTC',
'File': 'string',
'FileFingerprintLines': 'string',
'MultiLineStartPattern': 'string',
'InitialPosition': 'start_of_file'|'end_of_file',
'Encoding': 'ascii'|'big5'|'big5hkscs'|'cp037'|'cp424'|'cp437'|'cp500'|'cp720'|'cp737'|'cp775'|'cp850'|'cp852'|'cp855'|'cp856'|'cp857'|'cp858'|'cp860'|'cp861'|'cp862'|'cp863'|'cp864'|'cp865'|'cp866'|'cp869'|'cp874'|'cp875'|'cp932'|'cp949'|'cp950'|'cp1006'|'cp1026'|'cp1140'|'cp1250'|'cp1251'|'cp1252'|'cp1253'|'cp1254'|'cp1255'|'cp1256'|'cp1257'|'cp1258'|'euc_jp'|'euc_jis_2004'|'euc_jisx0213'|'euc_kr'|'gb2312'|'gbk'|'gb18030'|'hz'|'iso2022_jp'|'iso2022_jp_1'|'iso2022_jp_2'|'iso2022_jp_2004'|'iso2022_jp_3'|'iso2022_jp_ext'|'iso2022_kr'|'latin_1'|'iso8859_2'|'iso8859_3'|'iso8859_4'|'iso8859_5'|'iso8859_6'|'iso8859_7'|'iso8859_8'|'iso8859_9'|'iso8859_10'|'iso8859_13'|'iso8859_14'|'iso8859_15'|'iso8859_16'|'johab'|'koi8_r'|'koi8_u'|'mac_cyrillic'|'mac_greek'|'mac_iceland'|'mac_latin2'|'mac_roman'|'mac_turkish'|'ptcp154'|'shift_jis'|'shift_jis_2004'|'shift_jisx0213'|'utf_32'|'utf_32_be'|'utf_32_le'|'utf_16'|'utf_16_be'|'utf_16_le'|'utf_7'|'utf_8'|'utf_8_sig',
'BufferDuration': 123,
'BatchCount': 123,
'BatchSize': 123
},
]
},
CustomInstanceProfileArn='string',
CustomJson='string',
CustomSecurityGroupIds=[
'string',
],
Packages=[
'string',
],
VolumeConfigurations=[
{
'MountPoint': 'string',
'RaidLevel': 123,
'NumberOfDisks': 123,
'Size': 123,
'VolumeType': 'string',
'Iops': 123,
'Encrypted': True|False
},
],
EnableAutoHealing=True|False,
AutoAssignElasticIps=True|False,
AutoAssignPublicIps=True|False,
CustomRecipes={
'Setup': [
'string',
],
'Configure': [
'string',
],
'Deploy': [
'string',
],
'Undeploy': [
'string',
],
'Shutdown': [
'string',
]
},
InstallUpdatesOnBoot=True|False,
UseEbsOptimizedInstances=True|False,
LifecycleEventConfiguration={
'Shutdown': {
'ExecutionTimeout': 123,
'DelayUntilElbConnectionsDrained': True|False
}
}
)
[REQUIRED]
The layer stack ID.
[REQUIRED]
The layer type. A stack cannot have more than one built-in layer of the same type. It can have any number of custom layers. Built-in layers are not available in Chef 12 stacks.
[REQUIRED]
The layer name, which is used by the console.
[REQUIRED]
For custom layers only, use this parameter to specify the layer's short name, which is used internally by AWS OpsWorks Stacks and by Chef recipes. The short name is also used as the name for the directory where your app files are installed. It can have a maximum of 200 characters, which are limited to the alphanumeric characters, '-', '_', and '.'.
The built-in layers' short names are defined by AWS OpsWorks Stacks. For more information, see the Layer Reference .
One or more user-defined key-value pairs to be added to the stack attributes.
To create a cluster layer, set the EcsClusterArn attribute to the cluster's ARN.
Specifies CloudWatch Logs configuration options for the layer. For more information, see CloudWatchLogsLogStream .
Whether CloudWatch Logs is enabled for a layer.
A list of configuration options for CloudWatch Logs.
Describes the Amazon CloudWatch logs configuration for a layer. For detailed information about members of this data type, see the CloudWatch Logs Agent Reference .
Specifies the destination log group. A log group is created automatically if it doesn't already exist. Log group names can be between 1 and 512 characters long. Allowed characters include a-z, A-Z, 0-9, '_' (underscore), '-' (hyphen), '/' (forward slash), and '.' (period).
Specifies how the time stamp is extracted from logs. For more information, see the CloudWatch Logs Agent Reference .
Specifies the time zone of log event time stamps.
Specifies log files that you want to push to CloudWatch Logs.
File can point to a specific file or multiple files (by using wild card characters such as /var/log/system.log* ). Only the latest file is pushed to CloudWatch Logs, based on file modification time. We recommend that you use wild card characters to specify a series of files of the same type, such as access_log.2014-06-01-01 , access_log.2014-06-01-02 , and so on by using a pattern like access_log.* . Don't use a wildcard to match multiple file types, such as access_log_80 and access_log_443 . To specify multiple, different file types, add another log stream entry to the configuration file, so that each log file type is stored in a different log group.
Zipped files are not supported.
Specifies the range of lines for identifying a file. The valid values are one number, or two dash-delimited numbers, such as '1', '2-5'. The default value is '1', meaning the first line is used to calculate the fingerprint. Fingerprint lines are not sent to CloudWatch Logs unless all specified lines are available.
Specifies the pattern for identifying the start of a log message.
Specifies where to start to read data (start_of_file or end_of_file). The default is start_of_file. This setting is only used if there is no state persisted for that log stream.
Specifies the encoding of the log file so that the file can be read correctly. The default is utf_8 . Encodings supported by Python codecs.decode() can be used here.
Specifies the time duration for the batching of log events. The minimum value is 5000ms and default value is 5000ms.
Specifies the max number of log events in a batch, up to 10000. The default value is 1000.
Specifies the maximum size of log events in a batch, in bytes, up to 1048576 bytes. The default value is 32768 bytes. This size is calculated as the sum of all event messages in UTF-8, plus 26 bytes for each log event.
An array containing the layer custom security group IDs.
An array of Package objects that describes the layer packages.
A VolumeConfigurations object that describes the layer's Amazon EBS volumes.
Describes an Amazon EBS volume configuration.
The volume mount point. For example "/dev/sdh".
The volume RAID level .
The number of disks in the volume.
The volume size.
The volume type. For more information, see Amazon EBS Volume Types .
For PIOPS volumes, the IOPS per disk.
Specifies whether an Amazon EBS volume is encrypted. For more information, see Amazon EBS Encryption .
A LayerCustomRecipes object that specifies the layer custom recipes.
An array of custom recipe names to be run following a setup event.
An array of custom recipe names to be run following a configure event.
An array of custom recipe names to be run following a deploy event.
An array of custom recipe names to be run following a undeploy event.
An array of custom recipe names to be run following a shutdown event.
Whether to install operating system and package updates when the instance boots. The default value is true . To control when updates are installed, set this value to false . You must then update your instances manually by using CreateDeployment to run the update_dependencies stack command or by manually running yum (Amazon Linux) or apt-get (Ubuntu) on the instances.
Note
To ensure that your instances have the latest security updates, we strongly recommend using the default value of true .
A LifeCycleEventConfiguration object that you can use to configure the Shutdown event to specify an execution timeout and enable or disable Elastic Load Balancer connection draining.
A ShutdownEventConfiguration object that specifies the Shutdown event configuration.
The time, in seconds, that AWS OpsWorks Stacks will wait after triggering a Shutdown event before shutting down an instance.
Whether to enable Elastic Load Balancing connection draining. For more information, see Connection Draining
dict
Response Syntax
{
'LayerId': 'string'
}
Response Structure
(dict) --
Contains the response to a CreateLayer request.
LayerId (string) --
The layer ID.
Creates a new stack. For more information, see Create a New Stack .
Required Permissions : To use this action, an IAM user must have an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.create_stack(
Name='string',
Region='string',
VpcId='string',
Attributes={
'string': 'string'
},
ServiceRoleArn='string',
DefaultInstanceProfileArn='string',
DefaultOs='string',
HostnameTheme='string',
DefaultAvailabilityZone='string',
DefaultSubnetId='string',
CustomJson='string',
ConfigurationManager={
'Name': 'string',
'Version': 'string'
},
ChefConfiguration={
'ManageBerkshelf': True|False,
'BerkshelfVersion': 'string'
},
UseCustomCookbooks=True|False,
UseOpsworksSecurityGroups=True|False,
CustomCookbooksSource={
'Type': 'git'|'svn'|'archive'|'s3',
'Url': 'string',
'Username': 'string',
'Password': 'string',
'SshKey': 'string',
'Revision': 'string'
},
DefaultSshKeyName='string',
DefaultRootDeviceType='ebs'|'instance-store',
AgentVersion='string'
)
[REQUIRED]
The stack name.
[REQUIRED]
The stack's AWS region, such as ap-south-1 . For more information about Amazon regions, see Regions and Endpoints .
Note
In the AWS CLI, this API maps to the --stack-region parameter. If the --stack-region parameter and the AWS CLI common parameter --region are set to the same value, the stack uses a regional endpoint. If the --stack-region parameter is not set, but the AWS CLI --region parameter is, this also results in a stack with a regional endpoint. However, if the --region parameter is set to us-east-1 , and the --stack-region parameter is set to one of the following, then the stack uses a legacy or classic region: us-west-1, us-west-2, sa-east-1, eu-central-1, eu-west-1, ap-northeast-1, ap-southeast-1, ap-southeast-2 . In this case, the actual API endpoint of the stack is in us-east-1 . Only the preceding regions are supported as classic regions in the us-east-1 API endpoint. Because it is a best practice to choose the regional endpoint that is closest to where you manage AWS, we recommend that you use regional endpoints for new stacks. The AWS CLI common --region parameter always specifies a regional API endpoint; it cannot be used to specify a classic AWS OpsWorks Stacks region.
The ID of the VPC that the stack is to be launched into. The VPC must be in the stack's region. All instances are launched into this VPC. You cannot change the ID later.
If the VPC ID corresponds to a default VPC and you have specified either the DefaultAvailabilityZone or the DefaultSubnetId parameter only, AWS OpsWorks Stacks infers the value of the other parameter. If you specify neither parameter, AWS OpsWorks Stacks sets these parameters to the first valid Availability Zone for the specified region and the corresponding default VPC subnet ID, respectively.
If you specify a nondefault VPC ID, note the following:
For more information about how to use AWS OpsWorks Stacks with a VPC, see Running a Stack in a VPC . For more information about default VPC and EC2-Classic, see Supported Platforms .
One or more user-defined key-value pairs to be added to the stack attributes.
[REQUIRED]
The stack's AWS Identity and Access Management (IAM) role, which allows AWS OpsWorks Stacks to work with AWS resources on your behalf. You must set this parameter to the Amazon Resource Name (ARN) for an existing IAM role. For more information about IAM ARNs, see Using Identifiers .
[REQUIRED]
The Amazon Resource Name (ARN) of an IAM profile that is the default profile for all of the stack's EC2 instances. For more information about IAM ARNs, see Using Identifiers .
The stack's default operating system, which is installed on every instance unless you specify a different operating system when you create the instance. You can specify one of the following.
The default option is the current Amazon Linux version. For more information about supported operating systems, see AWS OpsWorks Stacks Operating Systems .
The stack's host name theme, with spaces replaced by underscores. The theme is used to generate host names for the stack's instances. By default, HostnameTheme is set to Layer_Dependent , which creates host names by appending integers to the layer's short name. The other themes are:
To obtain a generated host name, call GetHostNameSuggestion , which returns a host name based on the current theme.
A string that contains user-defined, custom JSON. It can be used to override the corresponding default stack configuration attribute values or to pass data to recipes. The string should be in the following format:
"{\"key1\": \"value1\", \"key2\": \"value2\",...}"
For more information about custom JSON, see Use Custom JSON to Modify the Stack Configuration Attributes .
The configuration manager. When you create a stack we recommend that you use the configuration manager to specify the Chef version: 12, 11.10, or 11.4 for Linux stacks, or 12.2 for Windows stacks. The default value for Linux stacks is currently 12.
The name. This parameter must be set to "Chef".
The Chef version. This parameter must be set to 12, 11.10, or 11.4 for Linux stacks, and to 12.2 for Windows stacks. The default value for Linux stacks is 11.4.
A ChefConfiguration object that specifies whether to enable Berkshelf and the Berkshelf version on Chef 11.10 stacks. For more information, see Create a New Stack .
Whether to enable Berkshelf.
The Berkshelf version.
Whether to associate the AWS OpsWorks Stacks built-in security groups with the stack's layers.
AWS OpsWorks Stacks provides a standard set of built-in security groups, one for each layer, which are associated with layers by default. With UseOpsworksSecurityGroups you can instead provide your own custom security groups. UseOpsworksSecurityGroups has the following settings:
For more information, see Create a New Stack .
Contains the information required to retrieve an app or cookbook from a repository. For more information, see Creating Apps or Custom Recipes and Cookbooks .
The repository type.
The source URL. The following is an example of an Amazon S3 source URL: https://s3.amazonaws.com/opsworks-demo-bucket/opsworks_cookbook_demo.tar.gz .
This parameter depends on the repository type.
When included in a request, the parameter depends on the repository type.
For more information on how to safely handle IAM credentials, see http://docs.aws.amazon.com/general/latest/gr/aws-access-keys-best-practices.html .
In responses, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
In requests, the repository's SSH key.
In responses, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
The application's version. AWS OpsWorks Stacks enables you to easily deploy new versions of an application. One of the simplest approaches is to have branches or revisions in your repository that represent different versions that can potentially be deployed.
The default AWS OpsWorks Stacks agent version. You have the following options:
The default setting is the most recent release of the agent. To specify an agent version, you must use the complete version number, not the abbreviated number shown on the console. For a list of available agent version numbers, call DescribeAgentVersions . AgentVersion cannot be set to Chef 12.2.
Note
You can also specify an agent version when you create or update an instance, which overrides the stack's default setting.
dict
Response Syntax
{
'StackId': 'string'
}
Response Structure
(dict) --
Contains the response to a CreateStack request.
StackId (string) --
The stack ID, which is an opaque string that you use to identify the stack when performing actions such as DescribeStacks .
Creates a new user profile.
Required Permissions : To use this action, an IAM user must have an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.create_user_profile(
IamUserArn='string',
SshUsername='string',
SshPublicKey='string',
AllowSelfManagement=True|False
)
[REQUIRED]
The user's IAM ARN; this can also be a federated user's ARN.
dict
Response Syntax
{
'IamUserArn': 'string'
}
Response Structure
(dict) --
Contains the response to a CreateUserProfile request.
IamUserArn (string) --
The user's IAM ARN.
Deletes a specified app.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.delete_app(
AppId='string'
)
[REQUIRED]
The app ID.
Deletes a specified instance, which terminates the associated Amazon EC2 instance. You must stop an instance before you can delete it.
For more information, see Deleting Instances .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.delete_instance(
InstanceId='string',
DeleteElasticIp=True|False,
DeleteVolumes=True|False
)
[REQUIRED]
The instance ID.
None
Deletes a specified layer. You must first stop and then delete all associated instances or unassign registered instances. For more information, see How to Delete a Layer .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.delete_layer(
LayerId='string'
)
[REQUIRED]
The layer ID.
Deletes a specified stack. You must first delete all instances, layers, and apps or deregister registered instances. For more information, see Shut Down a Stack .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.delete_stack(
StackId='string'
)
[REQUIRED]
The stack ID.
Deletes a user profile.
Required Permissions : To use this action, an IAM user must have an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.delete_user_profile(
IamUserArn='string'
)
[REQUIRED]
The user's IAM ARN. This can also be a federated user's ARN.
Deregisters a specified Amazon ECS cluster from a stack. For more information, see Resource Management .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack or an attached policy that explicitly grants permissions. For more information on user permissions, see http://docs.aws.amazon.com/opsworks/latest/userguide/opsworks-security-users.html .
See also: AWS API Documentation
Request Syntax
response = client.deregister_ecs_cluster(
EcsClusterArn='string'
)
[REQUIRED]
The cluster's Amazon Resource Number (ARN).
Deregisters a specified Elastic IP address. The address can then be registered by another stack. For more information, see Resource Management .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.deregister_elastic_ip(
ElasticIp='string'
)
[REQUIRED]
The Elastic IP address.
Deregister a registered Amazon EC2 or on-premises instance. This action removes the instance from the stack and returns it to your control. This action cannot be used with instances that were created with AWS OpsWorks Stacks.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.deregister_instance(
InstanceId='string'
)
[REQUIRED]
The instance ID.
Deregisters an Amazon RDS instance.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.deregister_rds_db_instance(
RdsDbInstanceArn='string'
)
[REQUIRED]
The Amazon RDS instance's ARN.
Deregisters an Amazon EBS volume. The volume can then be registered by another stack. For more information, see Resource Management .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.deregister_volume(
VolumeId='string'
)
[REQUIRED]
The AWS OpsWorks Stacks volume ID, which is the GUID that AWS OpsWorks Stacks assigned to the instance when you registered the volume with the stack, not the Amazon EC2 volume ID.
Describes the available AWS OpsWorks Stacks agent versions. You must specify a stack ID or a configuration manager. DescribeAgentVersions returns a list of available agent versions for the specified stack or configuration manager.
See also: AWS API Documentation
Request Syntax
response = client.describe_agent_versions(
StackId='string',
ConfigurationManager={
'Name': 'string',
'Version': 'string'
}
)
The configuration manager.
The name. This parameter must be set to "Chef".
The Chef version. This parameter must be set to 12, 11.10, or 11.4 for Linux stacks, and to 12.2 for Windows stacks. The default value for Linux stacks is 11.4.
dict
Response Syntax
{
'AgentVersions': [
{
'Version': 'string',
'ConfigurationManager': {
'Name': 'string',
'Version': 'string'
}
},
]
}
Response Structure
(dict) --
Contains the response to a DescribeAgentVersions request.
AgentVersions (list) --
The agent versions for the specified stack or configuration manager. Note that this value is the complete version number, not the abbreviated number used by the console.
(dict) --
Describes an agent version.
Version (string) --
The agent version.
ConfigurationManager (dict) --
The configuration manager.
Name (string) --
The name. This parameter must be set to "Chef".
Version (string) --
The Chef version. This parameter must be set to 12, 11.10, or 11.4 for Linux stacks, and to 12.2 for Windows stacks. The default value for Linux stacks is 11.4.
Requests a description of a specified set of apps.
Note
This call accepts only one resource-identifying parameter.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_apps(
StackId='string',
AppIds=[
'string',
]
)
An array of app IDs for the apps to be described. If you use this parameter, DescribeApps returns a description of the specified apps. Otherwise, it returns a description of every app.
dict
Response Syntax
{
'Apps': [
{
'AppId': 'string',
'StackId': 'string',
'Shortname': 'string',
'Name': 'string',
'Description': 'string',
'DataSources': [
{
'Type': 'string',
'Arn': 'string',
'DatabaseName': 'string'
},
],
'Type': 'aws-flow-ruby'|'java'|'rails'|'php'|'nodejs'|'static'|'other',
'AppSource': {
'Type': 'git'|'svn'|'archive'|'s3',
'Url': 'string',
'Username': 'string',
'Password': 'string',
'SshKey': 'string',
'Revision': 'string'
},
'Domains': [
'string',
],
'EnableSsl': True|False,
'SslConfiguration': {
'Certificate': 'string',
'PrivateKey': 'string',
'Chain': 'string'
},
'Attributes': {
'string': 'string'
},
'CreatedAt': 'string',
'Environment': [
{
'Key': 'string',
'Value': 'string',
'Secure': True|False
},
]
},
]
}
Response Structure
(dict) --
Contains the response to a DescribeApps request.
Apps (list) --
An array of App objects that describe the specified apps.
(dict) --
A description of the app.
AppId (string) --
The app ID.
StackId (string) --
The app stack ID.
Shortname (string) --
The app's short name.
Name (string) --
The app name.
Description (string) --
A description of the app.
DataSources (list) --
The app's data sources.
(dict) --
Describes an app's data source.
Type (string) --
The data source's type, AutoSelectOpsworksMysqlInstance , OpsworksMysqlInstance , RdsDbInstance , or None .
Arn (string) --
The data source's ARN.
DatabaseName (string) --
The database name.
Type (string) --
The app type.
AppSource (dict) --
A Source object that describes the app repository.
Type (string) --
The repository type.
Url (string) --
The source URL. The following is an example of an Amazon S3 source URL: https://s3.amazonaws.com/opsworks-demo-bucket/opsworks_cookbook_demo.tar.gz .
Username (string) --
This parameter depends on the repository type.
Password (string) --
When included in a request, the parameter depends on the repository type.
For more information on how to safely handle IAM credentials, see http://docs.aws.amazon.com/general/latest/gr/aws-access-keys-best-practices.html .
In responses, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
SshKey (string) --
In requests, the repository's SSH key.
In responses, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
Revision (string) --
The application's version. AWS OpsWorks Stacks enables you to easily deploy new versions of an application. One of the simplest approaches is to have branches or revisions in your repository that represent different versions that can potentially be deployed.
Domains (list) --
The app vhost settings with multiple domains separated by commas. For example: 'www.example.com, example.com'
EnableSsl (boolean) --
Whether to enable SSL for the app.
SslConfiguration (dict) --
An SslConfiguration object with the SSL configuration.
Certificate (string) --
The contents of the certificate's domain.crt file.
PrivateKey (string) --
The private key; the contents of the certificate's domain.kex file.
Chain (string) --
Optional. Can be used to specify an intermediate certificate authority key or client authentication.
Attributes (dict) --
The stack attributes.
CreatedAt (string) --
When the app was created.
Environment (list) --
An array of EnvironmentVariable objects that specify environment variables to be associated with the app. After you deploy the app, these variables are defined on the associated app server instances. For more information, see Environment Variables .
Note
There is no specific limit on the number of environment variables. However, the size of the associated data structure - which includes the variable names, values, and protected flag values - cannot exceed 10 KB (10240 Bytes). This limit should accommodate most if not all use cases, but if you do exceed it, you will cause an exception (API) with an "Environment: is too large (maximum is 10KB)" message.
(dict) --
Represents an app's environment variable.
Key (string) --
(Required) The environment variable's name, which can consist of up to 64 characters and must be specified. The name can contain upper- and lowercase letters, numbers, and underscores (_), but it must start with a letter or underscore.
Value (string) --
(Optional) The environment variable's value, which can be left empty. If you specify a value, it can contain up to 256 characters, which must all be printable.
Secure (boolean) --
(Optional) Whether the variable's value will be returned by the DescribeApps action. To conceal an environment variable's value, set Secure to true . DescribeApps then returns *****FILTERED***** instead of the actual value. The default value for Secure is false .
Describes the results of specified commands.
Note
This call accepts only one resource-identifying parameter.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_commands(
DeploymentId='string',
InstanceId='string',
CommandIds=[
'string',
]
)
An array of command IDs. If you include this parameter, DescribeCommands returns a description of the specified commands. Otherwise, it returns a description of every command.
dict
Response Syntax
{
'Commands': [
{
'CommandId': 'string',
'InstanceId': 'string',
'DeploymentId': 'string',
'CreatedAt': 'string',
'AcknowledgedAt': 'string',
'CompletedAt': 'string',
'Status': 'string',
'ExitCode': 123,
'LogUrl': 'string',
'Type': 'string'
},
]
}
Response Structure
(dict) --
Contains the response to a DescribeCommands request.
Commands (list) --
An array of Command objects that describe each of the specified commands.
(dict) --
Describes a command.
CommandId (string) --
The command ID.
InstanceId (string) --
The ID of the instance where the command was executed.
DeploymentId (string) --
The command deployment ID.
CreatedAt (string) --
Date and time when the command was run.
AcknowledgedAt (string) --
Date and time when the command was acknowledged.
CompletedAt (string) --
Date when the command completed.
Status (string) --
The command status:
ExitCode (integer) --
The command exit code.
LogUrl (string) --
The URL of the command log.
Type (string) --
The command type:
Requests a description of a specified set of deployments.
Note
This call accepts only one resource-identifying parameter.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_deployments(
StackId='string',
AppId='string',
DeploymentIds=[
'string',
]
)
An array of deployment IDs to be described. If you include this parameter, the command returns a description of the specified deployments. Otherwise, it returns a description of every deployment.
dict
Response Syntax
{
'Deployments': [
{
'DeploymentId': 'string',
'StackId': 'string',
'AppId': 'string',
'CreatedAt': 'string',
'CompletedAt': 'string',
'Duration': 123,
'IamUserArn': 'string',
'Comment': 'string',
'Command': {
'Name': 'install_dependencies'|'update_dependencies'|'update_custom_cookbooks'|'execute_recipes'|'configure'|'setup'|'deploy'|'rollback'|'start'|'stop'|'restart'|'undeploy',
'Args': {
'string': [
'string',
]
}
},
'Status': 'string',
'CustomJson': 'string',
'InstanceIds': [
'string',
]
},
]
}
Response Structure
(dict) --
Contains the response to a DescribeDeployments request.
Deployments (list) --
An array of Deployment objects that describe the deployments.
(dict) --
Describes a deployment of a stack or app.
DeploymentId (string) --
The deployment ID.
StackId (string) --
The stack ID.
AppId (string) --
The app ID.
CreatedAt (string) --
Date when the deployment was created.
CompletedAt (string) --
Date when the deployment completed.
Duration (integer) --
The deployment duration.
IamUserArn (string) --
The user's IAM ARN.
Comment (string) --
A user-defined comment.
Command (dict) --
Used to specify a stack or deployment command.
Name (string) --
Specifies the operation. You can specify only one command.
For stacks, the following commands are available:
Note
The update_dependencies and install_dependencies commands are supported only for Linux instances. You can run the commands successfully on Windows instances, but they do nothing.
For apps, the following commands are available:
Args (dict) --
The arguments of those commands that take arguments. It should be set to a JSON object with the following format:
{"arg_name1" : ["value1", "value2", ...], "arg_name2" : ["value1", "value2", ...], ...}
The update_dependencies command takes two arguments:
For example, to upgrade an instance to Amazon Linux 2016.09, set Args to the following.
{ "upgrade_os_to":["Amazon Linux 2016.09"], "allow_reboot":["true"] }
Status (string) --
The deployment status:
CustomJson (string) --
A string that contains user-defined custom JSON. It can be used to override the corresponding default stack configuration attribute values for stack or to pass data to recipes. The string should be in the following format:
"{\"key1\": \"value1\", \"key2\": \"value2\",...}"
For more information on custom JSON, see Use Custom JSON to Modify the Stack Configuration Attributes .
InstanceIds (list) --
The IDs of the target instances.
Describes Amazon ECS clusters that are registered with a stack. If you specify only a stack ID, you can use the MaxResults and NextToken parameters to paginate the response. However, AWS OpsWorks Stacks currently supports only one cluster per layer, so the result set has a maximum of one element.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack or an attached policy that explicitly grants permission. For more information about user permissions, see Managing User Permissions .
This call accepts only one resource-identifying parameter.
See also: AWS API Documentation
Request Syntax
response = client.describe_ecs_clusters(
EcsClusterArns=[
'string',
],
StackId='string',
NextToken='string',
MaxResults=123
)
A list of ARNs, one for each cluster to be described.
dict
Response Syntax
{
'EcsClusters': [
{
'EcsClusterArn': 'string',
'EcsClusterName': 'string',
'StackId': 'string',
'RegisteredAt': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Contains the response to a DescribeEcsClusters request.
EcsClusters (list) --
A list of EcsCluster objects containing the cluster descriptions.
(dict) --
Describes a registered Amazon ECS cluster.
EcsClusterArn (string) --
The cluster's ARN.
EcsClusterName (string) --
The cluster name.
StackId (string) --
The stack ID.
RegisteredAt (string) --
The time and date that the cluster was registered with the stack.
NextToken (string) --
If a paginated request does not return all of the remaining results, this parameter is set to a token that you can assign to the request object's NextToken parameter to retrieve the next set of results. If the previous paginated request returned all of the remaining results, this parameter is set to null .
Describes Elastic IP addresses .
Note
This call accepts only one resource-identifying parameter.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_elastic_ips(
InstanceId='string',
StackId='string',
Ips=[
'string',
]
)
An array of Elastic IP addresses to be described. If you include this parameter, DescribeElasticIps returns a description of the specified Elastic IP addresses. Otherwise, it returns a description of every Elastic IP address.
dict
Response Syntax
{
'ElasticIps': [
{
'Ip': 'string',
'Name': 'string',
'Domain': 'string',
'Region': 'string',
'InstanceId': 'string'
},
]
}
Response Structure
(dict) --
Contains the response to a DescribeElasticIps request.
ElasticIps (list) --
An ElasticIps object that describes the specified Elastic IP addresses.
(dict) --
Describes an Elastic IP address.
Ip (string) --
The IP address.
Name (string) --
The name.
Domain (string) --
The domain.
Region (string) --
The AWS region. For more information, see Regions and Endpoints .
InstanceId (string) --
The ID of the instance that the address is attached to.
Describes a stack's Elastic Load Balancing instances.
Note
This call accepts only one resource-identifying parameter.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_elastic_load_balancers(
StackId='string',
LayerIds=[
'string',
]
)
A list of layer IDs. The action describes the Elastic Load Balancing instances for the specified layers.
dict
Response Syntax
{
'ElasticLoadBalancers': [
{
'ElasticLoadBalancerName': 'string',
'Region': 'string',
'DnsName': 'string',
'StackId': 'string',
'LayerId': 'string',
'VpcId': 'string',
'AvailabilityZones': [
'string',
],
'SubnetIds': [
'string',
],
'Ec2InstanceIds': [
'string',
]
},
]
}
Response Structure
(dict) --
Contains the response to a DescribeElasticLoadBalancers request.
ElasticLoadBalancers (list) --
A list of ElasticLoadBalancer objects that describe the specified Elastic Load Balancing instances.
(dict) --
Describes an Elastic Load Balancing instance.
ElasticLoadBalancerName (string) --
The Elastic Load Balancing instance's name.
Region (string) --
The instance's AWS region.
DnsName (string) --
The instance's public DNS name.
StackId (string) --
The ID of the stack that the instance is associated with.
LayerId (string) --
The ID of the layer that the instance is attached to.
VpcId (string) --
The VPC ID.
AvailabilityZones (list) --
A list of Availability Zones.
SubnetIds (list) --
A list of subnet IDs, if the stack is running in a VPC.
Ec2InstanceIds (list) --
A list of the EC2 instances that the Elastic Load Balancing instance is managing traffic for.
Requests a description of a set of instances.
Note
This call accepts only one resource-identifying parameter.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_instances(
StackId='string',
LayerId='string',
InstanceIds=[
'string',
]
)
An array of instance IDs to be described. If you use this parameter, DescribeInstances returns a description of the specified instances. Otherwise, it returns a description of every instance.
dict
Response Syntax
{
'Instances': [
{
'AgentVersion': 'string',
'AmiId': 'string',
'Architecture': 'x86_64'|'i386',
'Arn': 'string',
'AutoScalingType': 'load'|'timer',
'AvailabilityZone': 'string',
'BlockDeviceMappings': [
{
'DeviceName': 'string',
'NoDevice': 'string',
'VirtualName': 'string',
'Ebs': {
'SnapshotId': 'string',
'Iops': 123,
'VolumeSize': 123,
'VolumeType': 'gp2'|'io1'|'standard',
'DeleteOnTermination': True|False
}
},
],
'CreatedAt': 'string',
'EbsOptimized': True|False,
'Ec2InstanceId': 'string',
'EcsClusterArn': 'string',
'EcsContainerInstanceArn': 'string',
'ElasticIp': 'string',
'Hostname': 'string',
'InfrastructureClass': 'string',
'InstallUpdatesOnBoot': True|False,
'InstanceId': 'string',
'InstanceProfileArn': 'string',
'InstanceType': 'string',
'LastServiceErrorId': 'string',
'LayerIds': [
'string',
],
'Os': 'string',
'Platform': 'string',
'PrivateDns': 'string',
'PrivateIp': 'string',
'PublicDns': 'string',
'PublicIp': 'string',
'RegisteredBy': 'string',
'ReportedAgentVersion': 'string',
'ReportedOs': {
'Family': 'string',
'Name': 'string',
'Version': 'string'
},
'RootDeviceType': 'ebs'|'instance-store',
'RootDeviceVolumeId': 'string',
'SecurityGroupIds': [
'string',
],
'SshHostDsaKeyFingerprint': 'string',
'SshHostRsaKeyFingerprint': 'string',
'SshKeyName': 'string',
'StackId': 'string',
'Status': 'string',
'SubnetId': 'string',
'Tenancy': 'string',
'VirtualizationType': 'paravirtual'|'hvm'
},
]
}
Response Structure
(dict) --
Contains the response to a DescribeInstances request.
Instances (list) --
An array of Instance objects that describe the instances.
(dict) --
Describes an instance.
AgentVersion (string) --
The agent version. This parameter is set to INHERIT if the instance inherits the default stack setting or to a a version number for a fixed agent version.
AmiId (string) --
A custom AMI ID to be used to create the instance. For more information, see Instances
Architecture (string) --
The instance architecture: "i386" or "x86_64".
Arn (string) --
The instance's Amazon Resource Number (ARN).
AutoScalingType (string) --
For load-based or time-based instances, the type.
AvailabilityZone (string) --
The instance Availability Zone. For more information, see Regions and Endpoints .
BlockDeviceMappings (list) --
An array of BlockDeviceMapping objects that specify the instance's block device mappings.
(dict) --
Describes a block device mapping. This data type maps directly to the Amazon EC2 BlockDeviceMapping data type.
DeviceName (string) --
The device name that is exposed to the instance, such as /dev/sdh . For the root device, you can use the explicit device name or you can set this parameter to ROOT_DEVICE and AWS OpsWorks Stacks will provide the correct device name.
NoDevice (string) --
Suppresses the specified device included in the AMI's block device mapping.
VirtualName (string) --
The virtual device name. For more information, see BlockDeviceMapping .
Ebs (dict) --
An EBSBlockDevice that defines how to configure an Amazon EBS volume when the instance is launched.
SnapshotId (string) --
The snapshot ID.
Iops (integer) --
The number of I/O operations per second (IOPS) that the volume supports. For more information, see EbsBlockDevice .
VolumeSize (integer) --
The volume size, in GiB. For more information, see EbsBlockDevice .
VolumeType (string) --
The volume type. gp2 for General Purpose (SSD) volumes, io1 for Provisioned IOPS (SSD) volumes, st1 for Throughput Optimized hard disk drives (HDD), sc1 for Cold HDD,and standard for Magnetic volumes.
If you specify the io1 volume type, you must also specify a value for the Iops attribute. The maximum ratio of provisioned IOPS to requested volume size (in GiB) is 50:1. AWS uses the default volume size (in GiB) specified in the AMI attributes to set IOPS to 50 x (volume size).
DeleteOnTermination (boolean) --
Whether the volume is deleted on instance termination.
CreatedAt (string) --
The time that the instance was created.
EbsOptimized (boolean) --
Whether this is an Amazon EBS-optimized instance.
Ec2InstanceId (string) --
The ID of the associated Amazon EC2 instance.
EcsClusterArn (string) --
For container instances, the Amazon ECS cluster's ARN.
EcsContainerInstanceArn (string) --
For container instances, the instance's ARN.
ElasticIp (string) --
The instance Elastic IP address .
Hostname (string) --
The instance host name.
InfrastructureClass (string) --
For registered instances, the infrastructure class: ec2 or on-premises .
InstallUpdatesOnBoot (boolean) --
Whether to install operating system and package updates when the instance boots. The default value is true . If this value is set to false , you must then update your instances manually by using CreateDeployment to run the update_dependencies stack command or by manually running yum (Amazon Linux) or apt-get (Ubuntu) on the instances.
Note
We strongly recommend using the default value of true , to ensure that your instances have the latest security updates.
InstanceId (string) --
The instance ID.
InstanceProfileArn (string) --
The ARN of the instance's IAM profile. For more information about IAM ARNs, see Using Identifiers .
InstanceType (string) --
The instance type, such as t2.micro .
LastServiceErrorId (string) --
The ID of the last service error. For more information, call DescribeServiceErrors .
LayerIds (list) --
An array containing the instance layer IDs.
Os (string) --
The instance's operating system.
Platform (string) --
The instance's platform.
PrivateDns (string) --
The instance's private DNS name.
PrivateIp (string) --
The instance's private IP address.
PublicDns (string) --
The instance public DNS name.
PublicIp (string) --
The instance public IP address.
RegisteredBy (string) --
For registered instances, who performed the registration.
ReportedAgentVersion (string) --
The instance's reported AWS OpsWorks Stacks agent version.
ReportedOs (dict) --
For registered instances, the reported operating system.
Family (string) --
The operating system family.
Name (string) --
The operating system name.
Version (string) --
The operating system version.
RootDeviceType (string) --
The instance's root device type. For more information, see Storage for the Root Device .
RootDeviceVolumeId (string) --
The root device volume ID.
SecurityGroupIds (list) --
An array containing the instance security group IDs.
SshHostDsaKeyFingerprint (string) --
The SSH key's Deep Security Agent (DSA) fingerprint.
SshHostRsaKeyFingerprint (string) --
The SSH key's RSA fingerprint.
SshKeyName (string) --
The instance's Amazon EC2 key-pair name.
StackId (string) --
The stack ID.
Status (string) --
The instance status:
SubnetId (string) --
The instance's subnet ID; applicable only if the stack is running in a VPC.
Tenancy (string) --
The instance's tenancy option, such as dedicated or host .
VirtualizationType (string) --
The instance's virtualization type: paravirtual or hvm .
Requests a description of one or more layers in a specified stack.
Note
This call accepts only one resource-identifying parameter.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_layers(
StackId='string',
LayerIds=[
'string',
]
)
An array of layer IDs that specify the layers to be described. If you omit this parameter, DescribeLayers returns a description of every layer in the specified stack.
dict
Response Syntax
{
'Layers': [
{
'Arn': 'string',
'StackId': 'string',
'LayerId': 'string',
'Type': 'aws-flow-ruby'|'ecs-cluster'|'java-app'|'lb'|'web'|'php-app'|'rails-app'|'nodejs-app'|'memcached'|'db-master'|'monitoring-master'|'custom',
'Name': 'string',
'Shortname': 'string',
'Attributes': {
'string': 'string'
},
'CloudWatchLogsConfiguration': {
'Enabled': True|False,
'LogStreams': [
{
'LogGroupName': 'string',
'DatetimeFormat': 'string',
'TimeZone': 'LOCAL'|'UTC',
'File': 'string',
'FileFingerprintLines': 'string',
'MultiLineStartPattern': 'string',
'InitialPosition': 'start_of_file'|'end_of_file',
'Encoding': 'ascii'|'big5'|'big5hkscs'|'cp037'|'cp424'|'cp437'|'cp500'|'cp720'|'cp737'|'cp775'|'cp850'|'cp852'|'cp855'|'cp856'|'cp857'|'cp858'|'cp860'|'cp861'|'cp862'|'cp863'|'cp864'|'cp865'|'cp866'|'cp869'|'cp874'|'cp875'|'cp932'|'cp949'|'cp950'|'cp1006'|'cp1026'|'cp1140'|'cp1250'|'cp1251'|'cp1252'|'cp1253'|'cp1254'|'cp1255'|'cp1256'|'cp1257'|'cp1258'|'euc_jp'|'euc_jis_2004'|'euc_jisx0213'|'euc_kr'|'gb2312'|'gbk'|'gb18030'|'hz'|'iso2022_jp'|'iso2022_jp_1'|'iso2022_jp_2'|'iso2022_jp_2004'|'iso2022_jp_3'|'iso2022_jp_ext'|'iso2022_kr'|'latin_1'|'iso8859_2'|'iso8859_3'|'iso8859_4'|'iso8859_5'|'iso8859_6'|'iso8859_7'|'iso8859_8'|'iso8859_9'|'iso8859_10'|'iso8859_13'|'iso8859_14'|'iso8859_15'|'iso8859_16'|'johab'|'koi8_r'|'koi8_u'|'mac_cyrillic'|'mac_greek'|'mac_iceland'|'mac_latin2'|'mac_roman'|'mac_turkish'|'ptcp154'|'shift_jis'|'shift_jis_2004'|'shift_jisx0213'|'utf_32'|'utf_32_be'|'utf_32_le'|'utf_16'|'utf_16_be'|'utf_16_le'|'utf_7'|'utf_8'|'utf_8_sig',
'BufferDuration': 123,
'BatchCount': 123,
'BatchSize': 123
},
]
},
'CustomInstanceProfileArn': 'string',
'CustomJson': 'string',
'CustomSecurityGroupIds': [
'string',
],
'DefaultSecurityGroupNames': [
'string',
],
'Packages': [
'string',
],
'VolumeConfigurations': [
{
'MountPoint': 'string',
'RaidLevel': 123,
'NumberOfDisks': 123,
'Size': 123,
'VolumeType': 'string',
'Iops': 123,
'Encrypted': True|False
},
],
'EnableAutoHealing': True|False,
'AutoAssignElasticIps': True|False,
'AutoAssignPublicIps': True|False,
'DefaultRecipes': {
'Setup': [
'string',
],
'Configure': [
'string',
],
'Deploy': [
'string',
],
'Undeploy': [
'string',
],
'Shutdown': [
'string',
]
},
'CustomRecipes': {
'Setup': [
'string',
],
'Configure': [
'string',
],
'Deploy': [
'string',
],
'Undeploy': [
'string',
],
'Shutdown': [
'string',
]
},
'CreatedAt': 'string',
'InstallUpdatesOnBoot': True|False,
'UseEbsOptimizedInstances': True|False,
'LifecycleEventConfiguration': {
'Shutdown': {
'ExecutionTimeout': 123,
'DelayUntilElbConnectionsDrained': True|False
}
}
},
]
}
Response Structure
(dict) --
Contains the response to a DescribeLayers request.
Layers (list) --
An array of Layer objects that describe the layers.
(dict) --
Describes a layer.
Arn (string) --
The Amazon Resource Number (ARN) of a layer.
StackId (string) --
The layer stack ID.
LayerId (string) --
The layer ID.
Type (string) --
The layer type.
Name (string) --
The layer name.
Shortname (string) --
The layer short name.
Attributes (dict) --
The layer attributes.
For the HaproxyStatsPassword , MysqlRootPassword , and GangliaPassword attributes, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value
For an ECS Cluster layer, AWS OpsWorks Stacks the EcsClusterArn attribute is set to the cluster's ARN.
CloudWatchLogsConfiguration (dict) --
The Amazon CloudWatch Logs configuration settings for the layer.
Enabled (boolean) --
Whether CloudWatch Logs is enabled for a layer.
LogStreams (list) --
A list of configuration options for CloudWatch Logs.
(dict) --
Describes the Amazon CloudWatch logs configuration for a layer. For detailed information about members of this data type, see the CloudWatch Logs Agent Reference .
LogGroupName (string) --
Specifies the destination log group. A log group is created automatically if it doesn't already exist. Log group names can be between 1 and 512 characters long. Allowed characters include a-z, A-Z, 0-9, '_' (underscore), '-' (hyphen), '/' (forward slash), and '.' (period).
DatetimeFormat (string) --
Specifies how the time stamp is extracted from logs. For more information, see the CloudWatch Logs Agent Reference .
TimeZone (string) --
Specifies the time zone of log event time stamps.
File (string) --
Specifies log files that you want to push to CloudWatch Logs.
File can point to a specific file or multiple files (by using wild card characters such as /var/log/system.log* ). Only the latest file is pushed to CloudWatch Logs, based on file modification time. We recommend that you use wild card characters to specify a series of files of the same type, such as access_log.2014-06-01-01 , access_log.2014-06-01-02 , and so on by using a pattern like access_log.* . Don't use a wildcard to match multiple file types, such as access_log_80 and access_log_443 . To specify multiple, different file types, add another log stream entry to the configuration file, so that each log file type is stored in a different log group.
Zipped files are not supported.
FileFingerprintLines (string) --
Specifies the range of lines for identifying a file. The valid values are one number, or two dash-delimited numbers, such as '1', '2-5'. The default value is '1', meaning the first line is used to calculate the fingerprint. Fingerprint lines are not sent to CloudWatch Logs unless all specified lines are available.
MultiLineStartPattern (string) --
Specifies the pattern for identifying the start of a log message.
InitialPosition (string) --
Specifies where to start to read data (start_of_file or end_of_file). The default is start_of_file. This setting is only used if there is no state persisted for that log stream.
Encoding (string) --
Specifies the encoding of the log file so that the file can be read correctly. The default is utf_8 . Encodings supported by Python codecs.decode() can be used here.
BufferDuration (integer) --
Specifies the time duration for the batching of log events. The minimum value is 5000ms and default value is 5000ms.
BatchCount (integer) --
Specifies the max number of log events in a batch, up to 10000. The default value is 1000.
BatchSize (integer) --
Specifies the maximum size of log events in a batch, in bytes, up to 1048576 bytes. The default value is 32768 bytes. This size is calculated as the sum of all event messages in UTF-8, plus 26 bytes for each log event.
CustomInstanceProfileArn (string) --
The ARN of the default IAM profile to be used for the layer's EC2 instances. For more information about IAM ARNs, see Using Identifiers .
CustomJson (string) --
A JSON formatted string containing the layer's custom stack configuration and deployment attributes.
CustomSecurityGroupIds (list) --
An array containing the layer's custom security group IDs.
DefaultSecurityGroupNames (list) --
An array containing the layer's security group names.
Packages (list) --
An array of Package objects that describe the layer's packages.
VolumeConfigurations (list) --
A VolumeConfigurations object that describes the layer's Amazon EBS volumes.
(dict) --
Describes an Amazon EBS volume configuration.
MountPoint (string) --
The volume mount point. For example "/dev/sdh".
RaidLevel (integer) --
The volume RAID level .
NumberOfDisks (integer) --
The number of disks in the volume.
Size (integer) --
The volume size.
VolumeType (string) --
The volume type. For more information, see Amazon EBS Volume Types .
Iops (integer) --
For PIOPS volumes, the IOPS per disk.
Encrypted (boolean) --
Specifies whether an Amazon EBS volume is encrypted. For more information, see Amazon EBS Encryption .
EnableAutoHealing (boolean) --
Whether auto healing is disabled for the layer.
AutoAssignElasticIps (boolean) --
Whether to automatically assign an Elastic IP address to the layer's instances. For more information, see How to Edit a Layer .
AutoAssignPublicIps (boolean) --
For stacks that are running in a VPC, whether to automatically assign a public IP address to the layer's instances. For more information, see How to Edit a Layer .
DefaultRecipes (dict) --
AWS OpsWorks Stacks supports five lifecycle events: setup , configuration , deploy , undeploy , and shutdown . For each layer, AWS OpsWorks Stacks runs a set of standard recipes for each event. In addition, you can provide custom recipes for any or all layers and events. AWS OpsWorks Stacks runs custom event recipes after the standard recipes. LayerCustomRecipes specifies the custom recipes for a particular layer to be run in response to each of the five events.
To specify a recipe, use the cookbook's directory name in the repository followed by two colons and the recipe name, which is the recipe's file name without the .rb extension. For example: phpapp2::dbsetup specifies the dbsetup.rb recipe in the repository's phpapp2 folder.
Setup (list) --
An array of custom recipe names to be run following a setup event.
Configure (list) --
An array of custom recipe names to be run following a configure event.
Deploy (list) --
An array of custom recipe names to be run following a deploy event.
Undeploy (list) --
An array of custom recipe names to be run following a undeploy event.
Shutdown (list) --
An array of custom recipe names to be run following a shutdown event.
CustomRecipes (dict) --
A LayerCustomRecipes object that specifies the layer's custom recipes.
Setup (list) --
An array of custom recipe names to be run following a setup event.
Configure (list) --
An array of custom recipe names to be run following a configure event.
Deploy (list) --
An array of custom recipe names to be run following a deploy event.
Undeploy (list) --
An array of custom recipe names to be run following a undeploy event.
Shutdown (list) --
An array of custom recipe names to be run following a shutdown event.
CreatedAt (string) --
Date when the layer was created.
InstallUpdatesOnBoot (boolean) --
Whether to install operating system and package updates when the instance boots. The default value is true . If this value is set to false , you must then update your instances manually by using CreateDeployment to run the update_dependencies stack command or manually running yum (Amazon Linux) or apt-get (Ubuntu) on the instances.
Note
We strongly recommend using the default value of true , to ensure that your instances have the latest security updates.
UseEbsOptimizedInstances (boolean) --
Whether the layer uses Amazon EBS-optimized instances.
LifecycleEventConfiguration (dict) --
A LifeCycleEventConfiguration object that specifies the Shutdown event configuration.
Shutdown (dict) --
A ShutdownEventConfiguration object that specifies the Shutdown event configuration.
ExecutionTimeout (integer) --
The time, in seconds, that AWS OpsWorks Stacks will wait after triggering a Shutdown event before shutting down an instance.
DelayUntilElbConnectionsDrained (boolean) --
Whether to enable Elastic Load Balancing connection draining. For more information, see Connection Draining
Describes load-based auto scaling configurations for specified layers.
Note
You must specify at least one of the parameters.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_load_based_auto_scaling(
LayerIds=[
'string',
]
)
[REQUIRED]
An array of layer IDs.
{
'LoadBasedAutoScalingConfigurations': [
{
'LayerId': 'string',
'Enable': True|False,
'UpScaling': {
'InstanceCount': 123,
'ThresholdsWaitTime': 123,
'IgnoreMetricsTime': 123,
'CpuThreshold': 123.0,
'MemoryThreshold': 123.0,
'LoadThreshold': 123.0,
'Alarms': [
'string',
]
},
'DownScaling': {
'InstanceCount': 123,
'ThresholdsWaitTime': 123,
'IgnoreMetricsTime': 123,
'CpuThreshold': 123.0,
'MemoryThreshold': 123.0,
'LoadThreshold': 123.0,
'Alarms': [
'string',
]
}
},
]
}
Response Structure
Contains the response to a DescribeLoadBasedAutoScaling request.
An array of LoadBasedAutoScalingConfiguration objects that describe each layer's configuration.
Describes a layer's load-based auto scaling configuration.
The layer ID.
Whether load-based auto scaling is enabled for the layer.
An AutoScalingThresholds object that describes the upscaling configuration, which defines how and when AWS OpsWorks Stacks increases the number of instances.
The number of instances to add or remove when the load exceeds a threshold.
The amount of time, in minutes, that the load must exceed a threshold before more instances are added or removed.
The amount of time (in minutes) after a scaling event occurs that AWS OpsWorks Stacks should ignore metrics and suppress additional scaling events. For example, AWS OpsWorks Stacks adds new instances following an upscaling event but the instances won't start reducing the load until they have been booted and configured. There is no point in raising additional scaling events during that operation, which typically takes several minutes. IgnoreMetricsTime allows you to direct AWS OpsWorks Stacks to suppress scaling events long enough to get the new instances online.
The CPU utilization threshold, as a percent of the available CPU. A value of -1 disables the threshold.
The memory utilization threshold, as a percent of the available memory. A value of -1 disables the threshold.
The load threshold. A value of -1 disables the threshold. For more information about how load is computed, see Load (computing) .
Custom Cloudwatch auto scaling alarms, to be used as thresholds. This parameter takes a list of up to five alarm names, which are case sensitive and must be in the same region as the stack.
Note
To use custom alarms, you must update your service role to allow cloudwatch:DescribeAlarms . You can either have AWS OpsWorks Stacks update the role for you when you first use this feature or you can edit the role manually. For more information, see Allowing AWS OpsWorks Stacks to Act on Your Behalf .
An AutoScalingThresholds object that describes the downscaling configuration, which defines how and when AWS OpsWorks Stacks reduces the number of instances.
The number of instances to add or remove when the load exceeds a threshold.
The amount of time, in minutes, that the load must exceed a threshold before more instances are added or removed.
The amount of time (in minutes) after a scaling event occurs that AWS OpsWorks Stacks should ignore metrics and suppress additional scaling events. For example, AWS OpsWorks Stacks adds new instances following an upscaling event but the instances won't start reducing the load until they have been booted and configured. There is no point in raising additional scaling events during that operation, which typically takes several minutes. IgnoreMetricsTime allows you to direct AWS OpsWorks Stacks to suppress scaling events long enough to get the new instances online.
The CPU utilization threshold, as a percent of the available CPU. A value of -1 disables the threshold.
The memory utilization threshold, as a percent of the available memory. A value of -1 disables the threshold.
The load threshold. A value of -1 disables the threshold. For more information about how load is computed, see Load (computing) .
Custom Cloudwatch auto scaling alarms, to be used as thresholds. This parameter takes a list of up to five alarm names, which are case sensitive and must be in the same region as the stack.
Note
To use custom alarms, you must update your service role to allow cloudwatch:DescribeAlarms . You can either have AWS OpsWorks Stacks update the role for you when you first use this feature or you can edit the role manually. For more information, see Allowing AWS OpsWorks Stacks to Act on Your Behalf .
Describes a user's SSH information.
Required Permissions : To use this action, an IAM user must have self-management enabled or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_my_user_profile()
{
'UserProfile': {
'IamUserArn': 'string',
'Name': 'string',
'SshUsername': 'string',
'SshPublicKey': 'string'
}
}
Response Structure
Contains the response to a DescribeMyUserProfile request.
A UserProfile object that describes the user's SSH information.
The user's IAM ARN.
The user's name.
The user's SSH user name.
The user's SSH public key.
Describes the operating systems that are supported by AWS OpsWorks Stacks.
See also: AWS API Documentation
Request Syntax
response = client.describe_operating_systems()
{
'OperatingSystems': [
{
'Name': 'string',
'Id': 'string',
'Type': 'string',
'ConfigurationManagers': [
{
'Name': 'string',
'Version': 'string'
},
],
'ReportedName': 'string',
'ReportedVersion': 'string',
'Supported': True|False
},
]
}
Response Structure
The response to a DescribeOperatingSystems request.
Contains information in response to a DescribeOperatingSystems request.
Describes supported operating systems in AWS OpsWorks Stacks.
The name of the operating system, such as Amazon Linux 2017.09 .
The ID of a supported operating system, such as Amazon Linux 2017.09 .
The type of a supported operating system, either Linux or Windows .
Supported configuration manager name and versions for an AWS OpsWorks Stacks operating system.
A block that contains information about the configuration manager (Chef) and the versions of the configuration manager that are supported for an operating system.
The name of the configuration manager, which is Chef.
The versions of the configuration manager that are supported by an operating system.
A short name for the operating system manufacturer.
The version of the operating system, including the release and edition, if applicable.
Indicates that an operating system is not supported for new instances.
Describes the permissions for a specified stack.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_permissions(
IamUserArn='string',
StackId='string'
)
dict
Response Syntax
{
'Permissions': [
{
'StackId': 'string',
'IamUserArn': 'string',
'AllowSsh': True|False,
'AllowSudo': True|False,
'Level': 'string'
},
]
}
Response Structure
(dict) --
Contains the response to a DescribePermissions request.
Permissions (list) --
An array of Permission objects that describe the stack permissions.
(dict) --
Describes stack or user permissions.
StackId (string) --
A stack ID.
IamUserArn (string) --
The Amazon Resource Name (ARN) for an AWS Identity and Access Management (IAM) role. For more information about IAM ARNs, see Using Identifiers .
AllowSsh (boolean) --
Whether the user can use SSH.
AllowSudo (boolean) --
Whether the user can use sudo .
Level (string) --
The user's permission level, which must be the following:
For more information on the permissions associated with these levels, see Managing User Permissions
Describe an instance's RAID arrays.
Note
This call accepts only one resource-identifying parameter.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_raid_arrays(
InstanceId='string',
StackId='string',
RaidArrayIds=[
'string',
]
)
An array of RAID array IDs. If you use this parameter, DescribeRaidArrays returns descriptions of the specified arrays. Otherwise, it returns a description of every array.
dict
Response Syntax
{
'RaidArrays': [
{
'RaidArrayId': 'string',
'InstanceId': 'string',
'Name': 'string',
'RaidLevel': 123,
'NumberOfDisks': 123,
'Size': 123,
'Device': 'string',
'MountPoint': 'string',
'AvailabilityZone': 'string',
'CreatedAt': 'string',
'StackId': 'string',
'VolumeType': 'string',
'Iops': 123
},
]
}
Response Structure
(dict) --
Contains the response to a DescribeRaidArrays request.
RaidArrays (list) --
A RaidArrays object that describes the specified RAID arrays.
(dict) --
Describes an instance's RAID array.
RaidArrayId (string) --
The array ID.
InstanceId (string) --
The instance ID.
Name (string) --
The array name.
RaidLevel (integer) --
The RAID level .
NumberOfDisks (integer) --
The number of disks in the array.
Size (integer) --
The array's size.
Device (string) --
The array's Linux device. For example /dev/mdadm0.
MountPoint (string) --
The array's mount point.
AvailabilityZone (string) --
The array's Availability Zone. For more information, see Regions and Endpoints .
CreatedAt (string) --
When the RAID array was created.
StackId (string) --
The stack ID.
VolumeType (string) --
The volume type, standard or PIOPS.
Iops (integer) --
For PIOPS volumes, the IOPS per disk.
Describes Amazon RDS instances.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
This call accepts only one resource-identifying parameter.
See also: AWS API Documentation
Request Syntax
response = client.describe_rds_db_instances(
StackId='string',
RdsDbInstanceArns=[
'string',
]
)
[REQUIRED]
The ID of the stack with which the instances are registered. The operation returns descriptions of all registered Amazon RDS instances.
An array containing the ARNs of the instances to be described.
dict
Response Syntax
{
'RdsDbInstances': [
{
'RdsDbInstanceArn': 'string',
'DbInstanceIdentifier': 'string',
'DbUser': 'string',
'DbPassword': 'string',
'Region': 'string',
'Address': 'string',
'Engine': 'string',
'StackId': 'string',
'MissingOnRds': True|False
},
]
}
Response Structure
(dict) --
Contains the response to a DescribeRdsDbInstances request.
RdsDbInstances (list) --
An a array of RdsDbInstance objects that describe the instances.
(dict) --
Describes an Amazon RDS instance.
RdsDbInstanceArn (string) --
The instance's ARN.
DbInstanceIdentifier (string) --
The DB instance identifier.
DbUser (string) --
The master user name.
DbPassword (string) --
AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
Region (string) --
The instance's AWS region.
Address (string) --
The instance's address.
Engine (string) --
The instance's database engine.
StackId (string) --
The ID of the stack with which the instance is registered.
MissingOnRds (boolean) --
Set to true if AWS OpsWorks Stacks is unable to discover the Amazon RDS instance. AWS OpsWorks Stacks attempts to discover the instance only once. If this value is set to true , you must deregister the instance, and then register it again.
Describes AWS OpsWorks Stacks service errors.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
This call accepts only one resource-identifying parameter.
See also: AWS API Documentation
Request Syntax
response = client.describe_service_errors(
StackId='string',
InstanceId='string',
ServiceErrorIds=[
'string',
]
)
An array of service error IDs. If you use this parameter, DescribeServiceErrors returns descriptions of the specified errors. Otherwise, it returns a description of every error.
dict
Response Syntax
{
'ServiceErrors': [
{
'ServiceErrorId': 'string',
'StackId': 'string',
'InstanceId': 'string',
'Type': 'string',
'Message': 'string',
'CreatedAt': 'string'
},
]
}
Response Structure
(dict) --
Contains the response to a DescribeServiceErrors request.
ServiceErrors (list) --
An array of ServiceError objects that describe the specified service errors.
(dict) --
Describes an AWS OpsWorks Stacks service error.
ServiceErrorId (string) --
The error ID.
StackId (string) --
The stack ID.
InstanceId (string) --
The instance ID.
Type (string) --
The error type.
Message (string) --
A message that describes the error.
CreatedAt (string) --
When the error occurred.
Requests a description of a stack's provisioning parameters.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_stack_provisioning_parameters(
StackId='string'
)
[REQUIRED]
The stack ID.
{
'AgentInstallerUrl': 'string',
'Parameters': {
'string': 'string'
}
}
Response Structure
Contains the response to a DescribeStackProvisioningParameters request.
The AWS OpsWorks Stacks agent installer's URL.
An embedded object that contains the provisioning parameters.
Describes the number of layers and apps in a specified stack, and the number of instances in each state, such as running_setup or online .
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_stack_summary(
StackId='string'
)
[REQUIRED]
The stack ID.
{
'StackSummary': {
'StackId': 'string',
'Name': 'string',
'Arn': 'string',
'LayersCount': 123,
'AppsCount': 123,
'InstancesCount': {
'Assigning': 123,
'Booting': 123,
'ConnectionLost': 123,
'Deregistering': 123,
'Online': 123,
'Pending': 123,
'Rebooting': 123,
'Registered': 123,
'Registering': 123,
'Requested': 123,
'RunningSetup': 123,
'SetupFailed': 123,
'ShuttingDown': 123,
'StartFailed': 123,
'StopFailed': 123,
'Stopped': 123,
'Stopping': 123,
'Terminated': 123,
'Terminating': 123,
'Unassigning': 123
}
}
}
Response Structure
Contains the response to a DescribeStackSummary request.
A StackSummary object that contains the results.
The stack ID.
The stack name.
The stack's ARN.
The number of layers.
The number of apps.
An InstancesCount object with the number of instances in each status.
The number of instances in the Assigning state.
The number of instances with booting status.
The number of instances with connection_lost status.
The number of instances in the Deregistering state.
The number of instances with online status.
The number of instances with pending status.
The number of instances with rebooting status.
The number of instances in the Registered state.
The number of instances in the Registering state.
The number of instances with requested status.
The number of instances with running_setup status.
The number of instances with setup_failed status.
The number of instances with shutting_down status.
The number of instances with start_failed status.
The number of instances with stop_failed status.
The number of instances with stopped status.
The number of instances with stopping status.
The number of instances with terminated status.
The number of instances with terminating status.
The number of instances in the Unassigning state.
Requests a description of one or more stacks.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_stacks(
StackIds=[
'string',
]
)
An array of stack IDs that specify the stacks to be described. If you omit this parameter, DescribeStacks returns a description of every stack.
{
'Stacks': [
{
'StackId': 'string',
'Name': 'string',
'Arn': 'string',
'Region': 'string',
'VpcId': 'string',
'Attributes': {
'string': 'string'
},
'ServiceRoleArn': 'string',
'DefaultInstanceProfileArn': 'string',
'DefaultOs': 'string',
'HostnameTheme': 'string',
'DefaultAvailabilityZone': 'string',
'DefaultSubnetId': 'string',
'CustomJson': 'string',
'ConfigurationManager': {
'Name': 'string',
'Version': 'string'
},
'ChefConfiguration': {
'ManageBerkshelf': True|False,
'BerkshelfVersion': 'string'
},
'UseCustomCookbooks': True|False,
'UseOpsworksSecurityGroups': True|False,
'CustomCookbooksSource': {
'Type': 'git'|'svn'|'archive'|'s3',
'Url': 'string',
'Username': 'string',
'Password': 'string',
'SshKey': 'string',
'Revision': 'string'
},
'DefaultSshKeyName': 'string',
'CreatedAt': 'string',
'DefaultRootDeviceType': 'ebs'|'instance-store',
'AgentVersion': 'string'
},
]
}
Response Structure
Contains the response to a DescribeStacks request.
An array of Stack objects that describe the stacks.
Describes a stack.
The stack ID.
The stack name.
The stack's ARN.
The stack AWS region, such as "ap-northeast-2". For more information about AWS regions, see Regions and Endpoints .
The VPC ID; applicable only if the stack is running in a VPC.
The stack's attributes.
The stack AWS Identity and Access Management (IAM) role.
The ARN of an IAM profile that is the default profile for all of the stack's EC2 instances. For more information about IAM ARNs, see Using Identifiers .
The stack's default operating system.
The stack host name theme, with spaces replaced by underscores.
The stack's default Availability Zone. For more information, see Regions and Endpoints .
The default subnet ID; applicable only if the stack is running in a VPC.
A JSON object that contains user-defined attributes to be added to the stack configuration and deployment attributes. You can use custom JSON to override the corresponding default stack configuration attribute values or to pass data to recipes. The string should be in the following format:
"{\"key1\": \"value1\", \"key2\": \"value2\",...}"
For more information on custom JSON, see Use Custom JSON to Modify the Stack Configuration Attributes .
The configuration manager.
The name. This parameter must be set to "Chef".
The Chef version. This parameter must be set to 12, 11.10, or 11.4 for Linux stacks, and to 12.2 for Windows stacks. The default value for Linux stacks is 11.4.
A ChefConfiguration object that specifies whether to enable Berkshelf and the Berkshelf version. For more information, see Create a New Stack .
Whether to enable Berkshelf.
The Berkshelf version.
Whether the stack uses custom cookbooks.
Whether the stack automatically associates the AWS OpsWorks Stacks built-in security groups with the stack's layers.
Contains the information required to retrieve an app or cookbook from a repository. For more information, see Creating Apps or Custom Recipes and Cookbooks .
The repository type.
The source URL. The following is an example of an Amazon S3 source URL: https://s3.amazonaws.com/opsworks-demo-bucket/opsworks_cookbook_demo.tar.gz .
This parameter depends on the repository type.
When included in a request, the parameter depends on the repository type.
For more information on how to safely handle IAM credentials, see http://docs.aws.amazon.com/general/latest/gr/aws-access-keys-best-practices.html .
In responses, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
In requests, the repository's SSH key.
In responses, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
The application's version. AWS OpsWorks Stacks enables you to easily deploy new versions of an application. One of the simplest approaches is to have branches or revisions in your repository that represent different versions that can potentially be deployed.
A default Amazon EC2 key pair for the stack's instances. You can override this value when you create or update an instance.
The date when the stack was created.
The default root device type. This value is used by default for all instances in the stack, but you can override it when you create an instance. For more information, see Storage for the Root Device .
The agent version. This parameter is set to LATEST for auto-update. or a version number for a fixed agent version.
Describes time-based auto scaling configurations for specified instances.
Note
You must specify at least one of the parameters.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_time_based_auto_scaling(
InstanceIds=[
'string',
]
)
[REQUIRED]
An array of instance IDs.
{
'TimeBasedAutoScalingConfigurations': [
{
'InstanceId': 'string',
'AutoScalingSchedule': {
'Monday': {
'string': 'string'
},
'Tuesday': {
'string': 'string'
},
'Wednesday': {
'string': 'string'
},
'Thursday': {
'string': 'string'
},
'Friday': {
'string': 'string'
},
'Saturday': {
'string': 'string'
},
'Sunday': {
'string': 'string'
}
}
},
]
}
Response Structure
Contains the response to a DescribeTimeBasedAutoScaling request.
An array of TimeBasedAutoScalingConfiguration objects that describe the configuration for the specified instances.
Describes an instance's time-based auto scaling configuration.
The instance ID.
A WeeklyAutoScalingSchedule object with the instance schedule.
The schedule for Monday.
The schedule for Tuesday.
The schedule for Wednesday.
The schedule for Thursday.
The schedule for Friday.
The schedule for Saturday.
The schedule for Sunday.
Describe specified users.
Required Permissions : To use this action, an IAM user must have an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_user_profiles(
IamUserArns=[
'string',
]
)
An array of IAM or federated user ARNs that identify the users to be described.
{
'UserProfiles': [
{
'IamUserArn': 'string',
'Name': 'string',
'SshUsername': 'string',
'SshPublicKey': 'string',
'AllowSelfManagement': True|False
},
]
}
Response Structure
Contains the response to a DescribeUserProfiles request.
A Users object that describes the specified users.
Describes a user's SSH information.
The user's IAM ARN.
The user's name.
The user's SSH user name.
The user's SSH public key.
Whether users can specify their own SSH public key through the My Settings page. For more information, see Managing User Permissions .
Describes an instance's Amazon EBS volumes.
Note
This call accepts only one resource-identifying parameter.
Required Permissions : To use this action, an IAM user must have a Show, Deploy, or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.describe_volumes(
InstanceId='string',
StackId='string',
RaidArrayId='string',
VolumeIds=[
'string',
]
)
Am array of volume IDs. If you use this parameter, DescribeVolumes returns descriptions of the specified volumes. Otherwise, it returns a description of every volume.
dict
Response Syntax
{
'Volumes': [
{
'VolumeId': 'string',
'Ec2VolumeId': 'string',
'Name': 'string',
'RaidArrayId': 'string',
'InstanceId': 'string',
'Status': 'string',
'Size': 123,
'Device': 'string',
'MountPoint': 'string',
'Region': 'string',
'AvailabilityZone': 'string',
'VolumeType': 'string',
'Iops': 123,
'Encrypted': True|False
},
]
}
Response Structure
(dict) --
Contains the response to a DescribeVolumes request.
Volumes (list) --
An array of volume IDs.
(dict) --
Describes an instance's Amazon EBS volume.
VolumeId (string) --
The volume ID.
Ec2VolumeId (string) --
The Amazon EC2 volume ID.
Name (string) --
The volume name.
RaidArrayId (string) --
The RAID array ID.
InstanceId (string) --
The instance ID.
Status (string) --
The value returned by DescribeVolumes .
Size (integer) --
The volume size.
Device (string) --
The device name.
MountPoint (string) --
The volume mount point. For example, "/mnt/disk1".
Region (string) --
The AWS region. For more information about AWS regions, see Regions and Endpoints .
AvailabilityZone (string) --
The volume Availability Zone. For more information, see Regions and Endpoints .
VolumeType (string) --
The volume type. For more information, see Amazon EBS Volume Types .
Iops (integer) --
For PIOPS volumes, the IOPS per disk.
Encrypted (boolean) --
Specifies whether an Amazon EBS volume is encrypted. For more information, see Amazon EBS Encryption .
Detaches a specified Elastic Load Balancing instance from its layer.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.detach_elastic_load_balancer(
ElasticLoadBalancerName='string',
LayerId='string'
)
[REQUIRED]
The Elastic Load Balancing instance's name.
[REQUIRED]
The ID of the layer that the Elastic Load Balancing instance is attached to.
None
Disassociates an Elastic IP address from its instance. The address remains registered with the stack. For more information, see Resource Management .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.disassociate_elastic_ip(
ElasticIp='string'
)
[REQUIRED]
The Elastic IP address.
Generate a presigned url given a client, its method, and arguments
The presigned url
Gets a generated host name for the specified layer, based on the current host name theme.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.get_hostname_suggestion(
LayerId='string'
)
[REQUIRED]
The layer ID.
{
'LayerId': 'string',
'Hostname': 'string'
}
Response Structure
Contains the response to a GetHostnameSuggestion request.
The layer ID.
The generated host name.
Create a paginator for an operation.
Returns an object that can wait for some condition.
Note
This action can be used only with Windows stacks.
Grants RDP access to a Windows instance for a specified time period.
See also: AWS API Documentation
Request Syntax
response = client.grant_access(
InstanceId='string',
ValidForInMinutes=123
)
[REQUIRED]
The instance's AWS OpsWorks Stacks ID.
dict
Response Syntax
{
'TemporaryCredential': {
'Username': 'string',
'Password': 'string',
'ValidForInMinutes': 123,
'InstanceId': 'string'
}
}
Response Structure
(dict) --
Contains the response to a GrantAccess request.
TemporaryCredential (dict) --
A TemporaryCredential object that contains the data needed to log in to the instance by RDP clients, such as the Microsoft Remote Desktop Connection.
Username (string) --
The user name.
Password (string) --
The password.
ValidForInMinutes (integer) --
The length of time (in minutes) that the grant is valid. When the grant expires, at the end of this period, the user will no longer be able to use the credentials to log in. If they are logged in at the time, they will be automatically logged out.
InstanceId (string) --
The instance's AWS OpsWorks Stacks ID.
Returns a list of tags that are applied to the specified stack or layer.
See also: AWS API Documentation
Request Syntax
response = client.list_tags(
ResourceArn='string',
MaxResults=123,
NextToken='string'
)
[REQUIRED]
The stack or layer's Amazon Resource Number (ARN).
dict
Response Syntax
{
'Tags': {
'string': 'string'
},
'NextToken': 'string'
}
Response Structure
(dict) --
Contains the response to a ListTags request.
Tags (dict) --
A set of key-value pairs that contain tag keys and tag values that are attached to a stack or layer.
NextToken (string) --
If a paginated request does not return all of the remaining results, this parameter is set to a token that you can assign to the request object's NextToken parameter to get the next set of results. If the previous paginated request returned all of the remaining results, this parameter is set to null .
Reboots a specified instance. For more information, see Starting, Stopping, and Rebooting Instances .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.reboot_instance(
InstanceId='string'
)
[REQUIRED]
The instance ID.
Registers a specified Amazon ECS cluster with a stack. You can register only one cluster with a stack. A cluster can be registered with only one stack. For more information, see Resource Management .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.register_ecs_cluster(
EcsClusterArn='string',
StackId='string'
)
[REQUIRED]
The cluster's ARN.
[REQUIRED]
The stack ID.
dict
Response Syntax
{
'EcsClusterArn': 'string'
}
Response Structure
(dict) --
Contains the response to a RegisterEcsCluster request.
EcsClusterArn (string) --
The cluster's ARN.
Registers an Elastic IP address with a specified stack. An address can be registered with only one stack at a time. If the address is already registered, you must first deregister it by calling DeregisterElasticIp . For more information, see Resource Management .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.register_elastic_ip(
ElasticIp='string',
StackId='string'
)
[REQUIRED]
The Elastic IP address.
[REQUIRED]
The stack ID.
dict
Response Syntax
{
'ElasticIp': 'string'
}
Response Structure
(dict) --
Contains the response to a RegisterElasticIp request.
ElasticIp (string) --
The Elastic IP address.
Registers instances that were created outside of AWS OpsWorks Stacks with a specified stack.
Note
We do not recommend using this action to register instances. The complete registration operation includes two tasks: installing the AWS OpsWorks Stacks agent on the instance, and registering the instance with the stack. RegisterInstance handles only the second step. You should instead use the AWS CLI register command, which performs the entire registration operation. For more information, see Registering an Instance with an AWS OpsWorks Stacks Stack .
Registered instances have the same requirements as instances that are created by using the CreateInstance API. For example, registered instances must be running a supported Linux-based operating system, and they must have a supported instance type. For more information about requirements for instances that you want to register, see Preparing the Instance .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.register_instance(
StackId='string',
Hostname='string',
PublicIp='string',
PrivateIp='string',
RsaPublicKey='string',
RsaPublicKeyFingerprint='string',
InstanceIdentity={
'Document': 'string',
'Signature': 'string'
}
)
[REQUIRED]
The ID of the stack that the instance is to be registered with.
An InstanceIdentity object that contains the instance's identity.
A JSON document that contains the metadata.
A signature that can be used to verify the document's accuracy and authenticity.
dict
Response Syntax
{
'InstanceId': 'string'
}
Response Structure
(dict) --
Contains the response to a RegisterInstanceResult request.
InstanceId (string) --
The registered instance's AWS OpsWorks Stacks ID.
Registers an Amazon RDS instance with a stack.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.register_rds_db_instance(
StackId='string',
RdsDbInstanceArn='string',
DbUser='string',
DbPassword='string'
)
[REQUIRED]
The stack ID.
[REQUIRED]
The Amazon RDS instance's ARN.
[REQUIRED]
The database's master user name.
[REQUIRED]
The database password.
None
Registers an Amazon EBS volume with a specified stack. A volume can be registered with only one stack at a time. If the volume is already registered, you must first deregister it by calling DeregisterVolume . For more information, see Resource Management .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.register_volume(
Ec2VolumeId='string',
StackId='string'
)
[REQUIRED]
The stack ID.
dict
Response Syntax
{
'VolumeId': 'string'
}
Response Structure
(dict) --
Contains the response to a RegisterVolume request.
VolumeId (string) --
The volume ID.
Specify the load-based auto scaling configuration for a specified layer. For more information, see Managing Load with Time-based and Load-based Instances .
Note
To use load-based auto scaling, you must create a set of load-based auto scaling instances. Load-based auto scaling operates only on the instances from that set, so you must ensure that you have created enough instances to handle the maximum anticipated load.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.set_load_based_auto_scaling(
LayerId='string',
Enable=True|False,
UpScaling={
'InstanceCount': 123,
'ThresholdsWaitTime': 123,
'IgnoreMetricsTime': 123,
'CpuThreshold': 123.0,
'MemoryThreshold': 123.0,
'LoadThreshold': 123.0,
'Alarms': [
'string',
]
},
DownScaling={
'InstanceCount': 123,
'ThresholdsWaitTime': 123,
'IgnoreMetricsTime': 123,
'CpuThreshold': 123.0,
'MemoryThreshold': 123.0,
'LoadThreshold': 123.0,
'Alarms': [
'string',
]
}
)
[REQUIRED]
The layer ID.
An AutoScalingThresholds object with the upscaling threshold configuration. If the load exceeds these thresholds for a specified amount of time, AWS OpsWorks Stacks starts a specified number of instances.
The number of instances to add or remove when the load exceeds a threshold.
The amount of time, in minutes, that the load must exceed a threshold before more instances are added or removed.
The amount of time (in minutes) after a scaling event occurs that AWS OpsWorks Stacks should ignore metrics and suppress additional scaling events. For example, AWS OpsWorks Stacks adds new instances following an upscaling event but the instances won't start reducing the load until they have been booted and configured. There is no point in raising additional scaling events during that operation, which typically takes several minutes. IgnoreMetricsTime allows you to direct AWS OpsWorks Stacks to suppress scaling events long enough to get the new instances online.
The CPU utilization threshold, as a percent of the available CPU. A value of -1 disables the threshold.
The memory utilization threshold, as a percent of the available memory. A value of -1 disables the threshold.
The load threshold. A value of -1 disables the threshold. For more information about how load is computed, see Load (computing) .
Custom Cloudwatch auto scaling alarms, to be used as thresholds. This parameter takes a list of up to five alarm names, which are case sensitive and must be in the same region as the stack.
Note
To use custom alarms, you must update your service role to allow cloudwatch:DescribeAlarms . You can either have AWS OpsWorks Stacks update the role for you when you first use this feature or you can edit the role manually. For more information, see Allowing AWS OpsWorks Stacks to Act on Your Behalf .
An AutoScalingThresholds object with the downscaling threshold configuration. If the load falls below these thresholds for a specified amount of time, AWS OpsWorks Stacks stops a specified number of instances.
The number of instances to add or remove when the load exceeds a threshold.
The amount of time, in minutes, that the load must exceed a threshold before more instances are added or removed.
The amount of time (in minutes) after a scaling event occurs that AWS OpsWorks Stacks should ignore metrics and suppress additional scaling events. For example, AWS OpsWorks Stacks adds new instances following an upscaling event but the instances won't start reducing the load until they have been booted and configured. There is no point in raising additional scaling events during that operation, which typically takes several minutes. IgnoreMetricsTime allows you to direct AWS OpsWorks Stacks to suppress scaling events long enough to get the new instances online.
The CPU utilization threshold, as a percent of the available CPU. A value of -1 disables the threshold.
The memory utilization threshold, as a percent of the available memory. A value of -1 disables the threshold.
The load threshold. A value of -1 disables the threshold. For more information about how load is computed, see Load (computing) .
Custom Cloudwatch auto scaling alarms, to be used as thresholds. This parameter takes a list of up to five alarm names, which are case sensitive and must be in the same region as the stack.
Note
To use custom alarms, you must update your service role to allow cloudwatch:DescribeAlarms . You can either have AWS OpsWorks Stacks update the role for you when you first use this feature or you can edit the role manually. For more information, see Allowing AWS OpsWorks Stacks to Act on Your Behalf .
None
Specifies a user's permissions. For more information, see Security and Permissions .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.set_permission(
StackId='string',
IamUserArn='string',
AllowSsh=True|False,
AllowSudo=True|False,
Level='string'
)
[REQUIRED]
The stack ID.
[REQUIRED]
The user's IAM ARN. This can also be a federated user's ARN.
The user's permission level, which must be set to one of the following strings. You cannot set your own permissions level.
For more information about the permissions associated with these levels, see Managing User Permissions .
None
Specify the time-based auto scaling configuration for a specified instance. For more information, see Managing Load with Time-based and Load-based Instances .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.set_time_based_auto_scaling(
InstanceId='string',
AutoScalingSchedule={
'Monday': {
'string': 'string'
},
'Tuesday': {
'string': 'string'
},
'Wednesday': {
'string': 'string'
},
'Thursday': {
'string': 'string'
},
'Friday': {
'string': 'string'
},
'Saturday': {
'string': 'string'
},
'Sunday': {
'string': 'string'
}
}
)
[REQUIRED]
The instance ID.
An AutoScalingSchedule with the instance schedule.
The schedule for Monday.
The schedule for Tuesday.
The schedule for Wednesday.
The schedule for Thursday.
The schedule for Friday.
The schedule for Saturday.
The schedule for Sunday.
None
Starts a specified instance. For more information, see Starting, Stopping, and Rebooting Instances .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.start_instance(
InstanceId='string'
)
[REQUIRED]
The instance ID.
Starts a stack's instances.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.start_stack(
StackId='string'
)
[REQUIRED]
The stack ID.
Stops a specified instance. When you stop a standard instance, the data disappears and must be reinstalled when you restart the instance. You can stop an Amazon EBS-backed instance without losing data. For more information, see Starting, Stopping, and Rebooting Instances .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.stop_instance(
InstanceId='string',
Force=True|False
)
[REQUIRED]
The instance ID.
None
Stops a specified stack.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.stop_stack(
StackId='string'
)
[REQUIRED]
The stack ID.
Apply cost-allocation tags to a specified stack or layer in AWS OpsWorks Stacks. For more information about how tagging works, see Tags in the AWS OpsWorks User Guide.
See also: AWS API Documentation
Request Syntax
response = client.tag_resource(
ResourceArn='string',
Tags={
'string': 'string'
}
)
[REQUIRED]
The stack or layer's Amazon Resource Number (ARN).
[REQUIRED]
A map that contains tag keys and tag values that are attached to a stack or layer.
None
Unassigns a registered instance from all layers that are using the instance. The instance remains in the stack as an unassigned instance, and can be assigned to another layer as needed. You cannot use this action with instances that were created with AWS OpsWorks Stacks.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.unassign_instance(
InstanceId='string'
)
[REQUIRED]
The instance ID.
Unassigns an assigned Amazon EBS volume. The volume remains registered with the stack. For more information, see Resource Management .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.unassign_volume(
VolumeId='string'
)
[REQUIRED]
The volume ID.
Removes tags from a specified stack or layer.
See also: AWS API Documentation
Request Syntax
response = client.untag_resource(
ResourceArn='string',
TagKeys=[
'string',
]
)
[REQUIRED]
The stack or layer's Amazon Resource Number (ARN).
[REQUIRED]
A list of the keys of tags to be removed from a stack or layer.
None
Updates a specified app.
Required Permissions : To use this action, an IAM user must have a Deploy or Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.update_app(
AppId='string',
Name='string',
Description='string',
DataSources=[
{
'Type': 'string',
'Arn': 'string',
'DatabaseName': 'string'
},
],
Type='aws-flow-ruby'|'java'|'rails'|'php'|'nodejs'|'static'|'other',
AppSource={
'Type': 'git'|'svn'|'archive'|'s3',
'Url': 'string',
'Username': 'string',
'Password': 'string',
'SshKey': 'string',
'Revision': 'string'
},
Domains=[
'string',
],
EnableSsl=True|False,
SslConfiguration={
'Certificate': 'string',
'PrivateKey': 'string',
'Chain': 'string'
},
Attributes={
'string': 'string'
},
Environment=[
{
'Key': 'string',
'Value': 'string',
'Secure': True|False
},
]
)
[REQUIRED]
The app ID.
The app's data sources.
Describes an app's data source.
The data source's type, AutoSelectOpsworksMysqlInstance , OpsworksMysqlInstance , RdsDbInstance , or None .
The data source's ARN.
The database name.
A Source object that specifies the app repository.
The repository type.
The source URL. The following is an example of an Amazon S3 source URL: https://s3.amazonaws.com/opsworks-demo-bucket/opsworks_cookbook_demo.tar.gz .
This parameter depends on the repository type.
When included in a request, the parameter depends on the repository type.
For more information on how to safely handle IAM credentials, see http://docs.aws.amazon.com/general/latest/gr/aws-access-keys-best-practices.html .
In responses, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
In requests, the repository's SSH key.
In responses, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
The application's version. AWS OpsWorks Stacks enables you to easily deploy new versions of an application. One of the simplest approaches is to have branches or revisions in your repository that represent different versions that can potentially be deployed.
The app's virtual host settings, with multiple domains separated by commas. For example: 'www.example.com, example.com'
An SslConfiguration object with the SSL configuration.
The contents of the certificate's domain.crt file.
The private key; the contents of the certificate's domain.kex file.
Optional. Can be used to specify an intermediate certificate authority key or client authentication.
One or more user-defined key/value pairs to be added to the stack attributes.
An array of EnvironmentVariable objects that specify environment variables to be associated with the app. After you deploy the app, these variables are defined on the associated app server instances.For more information, see Environment Variables .
There is no specific limit on the number of environment variables. However, the size of the associated data structure - which includes the variables' names, values, and protected flag values - cannot exceed 10 KB (10240 Bytes). This limit should accommodate most if not all use cases. Exceeding it will cause an exception with the message, "Environment: is too large (maximum is 10KB)."
Note
This parameter is supported only by Chef 11.10 stacks. If you have specified one or more environment variables, you cannot modify the stack's Chef version.
Represents an app's environment variable.
(Required) The environment variable's name, which can consist of up to 64 characters and must be specified. The name can contain upper- and lowercase letters, numbers, and underscores (_), but it must start with a letter or underscore.
(Optional) The environment variable's value, which can be left empty. If you specify a value, it can contain up to 256 characters, which must all be printable.
(Optional) Whether the variable's value will be returned by the DescribeApps action. To conceal an environment variable's value, set Secure to true . DescribeApps then returns *****FILTERED***** instead of the actual value. The default value for Secure is false .
None
Updates a registered Elastic IP address's name. For more information, see Resource Management .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.update_elastic_ip(
ElasticIp='string',
Name='string'
)
[REQUIRED]
The IP address for which you want to update the name.
None
Updates a specified instance.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.update_instance(
InstanceId='string',
LayerIds=[
'string',
],
InstanceType='string',
AutoScalingType='load'|'timer',
Hostname='string',
Os='string',
AmiId='string',
SshKeyName='string',
Architecture='x86_64'|'i386',
InstallUpdatesOnBoot=True|False,
EbsOptimized=True|False,
AgentVersion='string'
)
[REQUIRED]
The instance ID.
The instance's layer IDs.
The instance's operating system, which must be set to one of the following. You cannot update an instance that is using a custom AMI.
For more information about supported operating systems, see AWS OpsWorks Stacks Operating Systems .
The default option is the current Amazon Linux version. If you set this parameter to Custom , you must use the AmiId parameter to specify the custom AMI that you want to use. For more information about supported operating systems, see Operating Systems . For more information about how to use custom AMIs with OpsWorks, see Using Custom AMIs .
Note
You can specify a different Linux operating system for the updated stack, but you cannot change from Linux to Windows or Windows to Linux.
Whether to install operating system and package updates when the instance boots. The default value is true . To control when updates are installed, set this value to false . You must then update your instances manually by using CreateDeployment to run the update_dependencies stack command or by manually running yum (Amazon Linux) or apt-get (Ubuntu) on the instances.
Note
We strongly recommend using the default value of true , to ensure that your instances have the latest security updates.
The default AWS OpsWorks Stacks agent version. You have the following options:
The default setting is INHERIT . To specify an agent version, you must use the complete version number, not the abbreviated number shown on the console. For a list of available agent version numbers, call DescribeAgentVersions .
AgentVersion cannot be set to Chef 12.2.
None
Updates a specified layer.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.update_layer(
LayerId='string',
Name='string',
Shortname='string',
Attributes={
'string': 'string'
},
CloudWatchLogsConfiguration={
'Enabled': True|False,
'LogStreams': [
{
'LogGroupName': 'string',
'DatetimeFormat': 'string',
'TimeZone': 'LOCAL'|'UTC',
'File': 'string',
'FileFingerprintLines': 'string',
'MultiLineStartPattern': 'string',
'InitialPosition': 'start_of_file'|'end_of_file',
'Encoding': 'ascii'|'big5'|'big5hkscs'|'cp037'|'cp424'|'cp437'|'cp500'|'cp720'|'cp737'|'cp775'|'cp850'|'cp852'|'cp855'|'cp856'|'cp857'|'cp858'|'cp860'|'cp861'|'cp862'|'cp863'|'cp864'|'cp865'|'cp866'|'cp869'|'cp874'|'cp875'|'cp932'|'cp949'|'cp950'|'cp1006'|'cp1026'|'cp1140'|'cp1250'|'cp1251'|'cp1252'|'cp1253'|'cp1254'|'cp1255'|'cp1256'|'cp1257'|'cp1258'|'euc_jp'|'euc_jis_2004'|'euc_jisx0213'|'euc_kr'|'gb2312'|'gbk'|'gb18030'|'hz'|'iso2022_jp'|'iso2022_jp_1'|'iso2022_jp_2'|'iso2022_jp_2004'|'iso2022_jp_3'|'iso2022_jp_ext'|'iso2022_kr'|'latin_1'|'iso8859_2'|'iso8859_3'|'iso8859_4'|'iso8859_5'|'iso8859_6'|'iso8859_7'|'iso8859_8'|'iso8859_9'|'iso8859_10'|'iso8859_13'|'iso8859_14'|'iso8859_15'|'iso8859_16'|'johab'|'koi8_r'|'koi8_u'|'mac_cyrillic'|'mac_greek'|'mac_iceland'|'mac_latin2'|'mac_roman'|'mac_turkish'|'ptcp154'|'shift_jis'|'shift_jis_2004'|'shift_jisx0213'|'utf_32'|'utf_32_be'|'utf_32_le'|'utf_16'|'utf_16_be'|'utf_16_le'|'utf_7'|'utf_8'|'utf_8_sig',
'BufferDuration': 123,
'BatchCount': 123,
'BatchSize': 123
},
]
},
CustomInstanceProfileArn='string',
CustomJson='string',
CustomSecurityGroupIds=[
'string',
],
Packages=[
'string',
],
VolumeConfigurations=[
{
'MountPoint': 'string',
'RaidLevel': 123,
'NumberOfDisks': 123,
'Size': 123,
'VolumeType': 'string',
'Iops': 123,
'Encrypted': True|False
},
],
EnableAutoHealing=True|False,
AutoAssignElasticIps=True|False,
AutoAssignPublicIps=True|False,
CustomRecipes={
'Setup': [
'string',
],
'Configure': [
'string',
],
'Deploy': [
'string',
],
'Undeploy': [
'string',
],
'Shutdown': [
'string',
]
},
InstallUpdatesOnBoot=True|False,
UseEbsOptimizedInstances=True|False,
LifecycleEventConfiguration={
'Shutdown': {
'ExecutionTimeout': 123,
'DelayUntilElbConnectionsDrained': True|False
}
}
)
[REQUIRED]
The layer ID.
For custom layers only, use this parameter to specify the layer's short name, which is used internally by AWS OpsWorks Stacks and by Chef. The short name is also used as the name for the directory where your app files are installed. It can have a maximum of 200 characters and must be in the following format: /A[a-z0-9-_.]+Z/.
The built-in layers' short names are defined by AWS OpsWorks Stacks. For more information, see the Layer Reference
One or more user-defined key/value pairs to be added to the stack attributes.
Specifies CloudWatch Logs configuration options for the layer. For more information, see CloudWatchLogsLogStream .
Whether CloudWatch Logs is enabled for a layer.
A list of configuration options for CloudWatch Logs.
Describes the Amazon CloudWatch logs configuration for a layer. For detailed information about members of this data type, see the CloudWatch Logs Agent Reference .
Specifies the destination log group. A log group is created automatically if it doesn't already exist. Log group names can be between 1 and 512 characters long. Allowed characters include a-z, A-Z, 0-9, '_' (underscore), '-' (hyphen), '/' (forward slash), and '.' (period).
Specifies how the time stamp is extracted from logs. For more information, see the CloudWatch Logs Agent Reference .
Specifies the time zone of log event time stamps.
Specifies log files that you want to push to CloudWatch Logs.
File can point to a specific file or multiple files (by using wild card characters such as /var/log/system.log* ). Only the latest file is pushed to CloudWatch Logs, based on file modification time. We recommend that you use wild card characters to specify a series of files of the same type, such as access_log.2014-06-01-01 , access_log.2014-06-01-02 , and so on by using a pattern like access_log.* . Don't use a wildcard to match multiple file types, such as access_log_80 and access_log_443 . To specify multiple, different file types, add another log stream entry to the configuration file, so that each log file type is stored in a different log group.
Zipped files are not supported.
Specifies the range of lines for identifying a file. The valid values are one number, or two dash-delimited numbers, such as '1', '2-5'. The default value is '1', meaning the first line is used to calculate the fingerprint. Fingerprint lines are not sent to CloudWatch Logs unless all specified lines are available.
Specifies the pattern for identifying the start of a log message.
Specifies where to start to read data (start_of_file or end_of_file). The default is start_of_file. This setting is only used if there is no state persisted for that log stream.
Specifies the encoding of the log file so that the file can be read correctly. The default is utf_8 . Encodings supported by Python codecs.decode() can be used here.
Specifies the time duration for the batching of log events. The minimum value is 5000ms and default value is 5000ms.
Specifies the max number of log events in a batch, up to 10000. The default value is 1000.
Specifies the maximum size of log events in a batch, in bytes, up to 1048576 bytes. The default value is 32768 bytes. This size is calculated as the sum of all event messages in UTF-8, plus 26 bytes for each log event.
An array containing the layer's custom security group IDs.
An array of Package objects that describe the layer's packages.
A VolumeConfigurations object that describes the layer's Amazon EBS volumes.
Describes an Amazon EBS volume configuration.
The volume mount point. For example "/dev/sdh".
The volume RAID level .
The number of disks in the volume.
The volume size.
The volume type. For more information, see Amazon EBS Volume Types .
For PIOPS volumes, the IOPS per disk.
Specifies whether an Amazon EBS volume is encrypted. For more information, see Amazon EBS Encryption .
A LayerCustomRecipes object that specifies the layer's custom recipes.
An array of custom recipe names to be run following a setup event.
An array of custom recipe names to be run following a configure event.
An array of custom recipe names to be run following a deploy event.
An array of custom recipe names to be run following a undeploy event.
An array of custom recipe names to be run following a shutdown event.
Whether to install operating system and package updates when the instance boots. The default value is true . To control when updates are installed, set this value to false . You must then update your instances manually by using CreateDeployment to run the update_dependencies stack command or manually running yum (Amazon Linux) or apt-get (Ubuntu) on the instances.
Note
We strongly recommend using the default value of true , to ensure that your instances have the latest security updates.
A ShutdownEventConfiguration object that specifies the Shutdown event configuration.
The time, in seconds, that AWS OpsWorks Stacks will wait after triggering a Shutdown event before shutting down an instance.
Whether to enable Elastic Load Balancing connection draining. For more information, see Connection Draining
None
Updates a user's SSH public key.
Required Permissions : To use this action, an IAM user must have self-management enabled or an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.update_my_user_profile(
SshPublicKey='string'
)
Updates an Amazon RDS instance.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.update_rds_db_instance(
RdsDbInstanceArn='string',
DbUser='string',
DbPassword='string'
)
[REQUIRED]
The Amazon RDS instance's ARN.
None
Updates a specified stack.
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.update_stack(
StackId='string',
Name='string',
Attributes={
'string': 'string'
},
ServiceRoleArn='string',
DefaultInstanceProfileArn='string',
DefaultOs='string',
HostnameTheme='string',
DefaultAvailabilityZone='string',
DefaultSubnetId='string',
CustomJson='string',
ConfigurationManager={
'Name': 'string',
'Version': 'string'
},
ChefConfiguration={
'ManageBerkshelf': True|False,
'BerkshelfVersion': 'string'
},
UseCustomCookbooks=True|False,
CustomCookbooksSource={
'Type': 'git'|'svn'|'archive'|'s3',
'Url': 'string',
'Username': 'string',
'Password': 'string',
'SshKey': 'string',
'Revision': 'string'
},
DefaultSshKeyName='string',
DefaultRootDeviceType='ebs'|'instance-store',
UseOpsworksSecurityGroups=True|False,
AgentVersion='string'
)
[REQUIRED]
The stack ID.
One or more user-defined key-value pairs to be added to the stack attributes.
The stack's operating system, which must be set to one of the following:
The default option is the stack's current operating system. For more information about supported operating systems, see AWS OpsWorks Stacks Operating Systems .
The stack's new host name theme, with spaces replaced by underscores. The theme is used to generate host names for the stack's instances. By default, HostnameTheme is set to Layer_Dependent , which creates host names by appending integers to the layer's short name. The other themes are:
To obtain a generated host name, call GetHostNameSuggestion , which returns a host name based on the current theme.
A string that contains user-defined, custom JSON. It can be used to override the corresponding default stack configuration JSON values or to pass data to recipes. The string should be in the following format:
"{\"key1\": \"value1\", \"key2\": \"value2\",...}"
For more information about custom JSON, see Use Custom JSON to Modify the Stack Configuration Attributes .
The configuration manager. When you update a stack, we recommend that you use the configuration manager to specify the Chef version: 12, 11.10, or 11.4 for Linux stacks, or 12.2 for Windows stacks. The default value for Linux stacks is currently 12.
The name. This parameter must be set to "Chef".
The Chef version. This parameter must be set to 12, 11.10, or 11.4 for Linux stacks, and to 12.2 for Windows stacks. The default value for Linux stacks is 11.4.
A ChefConfiguration object that specifies whether to enable Berkshelf and the Berkshelf version on Chef 11.10 stacks. For more information, see Create a New Stack .
Whether to enable Berkshelf.
The Berkshelf version.
Contains the information required to retrieve an app or cookbook from a repository. For more information, see Creating Apps or Custom Recipes and Cookbooks .
The repository type.
The source URL. The following is an example of an Amazon S3 source URL: https://s3.amazonaws.com/opsworks-demo-bucket/opsworks_cookbook_demo.tar.gz .
This parameter depends on the repository type.
When included in a request, the parameter depends on the repository type.
For more information on how to safely handle IAM credentials, see http://docs.aws.amazon.com/general/latest/gr/aws-access-keys-best-practices.html .
In responses, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
In requests, the repository's SSH key.
In responses, AWS OpsWorks Stacks returns *****FILTERED***** instead of the actual value.
The application's version. AWS OpsWorks Stacks enables you to easily deploy new versions of an application. One of the simplest approaches is to have branches or revisions in your repository that represent different versions that can potentially be deployed.
Whether to associate the AWS OpsWorks Stacks built-in security groups with the stack's layers.
AWS OpsWorks Stacks provides a standard set of built-in security groups, one for each layer, which are associated with layers by default. UseOpsworksSecurityGroups allows you to provide your own custom security groups instead of using the built-in groups. UseOpsworksSecurityGroups has the following settings:
For more information, see Create a New Stack .
The default AWS OpsWorks Stacks agent version. You have the following options:
The default setting is LATEST . To specify an agent version, you must use the complete version number, not the abbreviated number shown on the console. For a list of available agent version numbers, call DescribeAgentVersions . AgentVersion cannot be set to Chef 12.2.
Note
You can also specify an agent version when you create or update an instance, which overrides the stack's default setting.
None
Updates a specified user profile.
Required Permissions : To use this action, an IAM user must have an attached policy that explicitly grants permissions. For more information about user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.update_user_profile(
IamUserArn='string',
SshUsername='string',
SshPublicKey='string',
AllowSelfManagement=True|False
)
[REQUIRED]
The user IAM ARN. This can also be a federated user's ARN.
None
Updates an Amazon EBS volume's name or mount point. For more information, see Resource Management .
Required Permissions : To use this action, an IAM user must have a Manage permissions level for the stack, or an attached policy that explicitly grants permissions. For more information on user permissions, see Managing User Permissions .
See also: AWS API Documentation
Request Syntax
response = client.update_volume(
VolumeId='string',
Name='string',
MountPoint='string'
)
[REQUIRED]
The volume ID.
None
The available paginators are:
paginator = client.get_paginator('describe_ecs_clusters')
Creates an iterator that will paginate through responses from OpsWorks.Client.describe_ecs_clusters().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
EcsClusterArns=[
'string',
],
StackId='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A list of ARNs, one for each cluster to be described.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'EcsClusters': [
{
'EcsClusterArn': 'string',
'EcsClusterName': 'string',
'StackId': 'string',
'RegisteredAt': 'string'
},
],
}
Response Structure
(dict) --
Contains the response to a DescribeEcsClusters request.
EcsClusters (list) --
A list of EcsCluster objects containing the cluster descriptions.
(dict) --
Describes a registered Amazon ECS cluster.
EcsClusterArn (string) --
The cluster's ARN.
EcsClusterName (string) --
The cluster name.
StackId (string) --
The stack ID.
RegisteredAt (string) --
The time and date that the cluster was registered with the stack.
The available waiters are:
waiter = client.get_waiter('app_exists')
Polls OpsWorks.Client.describe_apps() every 1 seconds until a successful state is reached. An error is returned after 40 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
StackId='string',
AppIds=[
'string',
],
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
An array of app IDs for the apps to be described. If you use this parameter, DescribeApps returns a description of the specified apps. Otherwise, it returns a description of every app.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 1
The maximum number of attempts to be made. Default: 40
None
waiter = client.get_waiter('deployment_successful')
Polls OpsWorks.Client.describe_deployments() every 15 seconds until a successful state is reached. An error is returned after 40 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
StackId='string',
AppId='string',
DeploymentIds=[
'string',
],
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
An array of deployment IDs to be described. If you include this parameter, the command returns a description of the specified deployments. Otherwise, it returns a description of every deployment.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 15
The maximum number of attempts to be made. Default: 40
None
waiter = client.get_waiter('instance_online')
Polls OpsWorks.Client.describe_instances() every 15 seconds until a successful state is reached. An error is returned after 40 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
StackId='string',
LayerId='string',
InstanceIds=[
'string',
],
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
An array of instance IDs to be described. If you use this parameter, DescribeInstances returns a description of the specified instances. Otherwise, it returns a description of every instance.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 15
The maximum number of attempts to be made. Default: 40
None
waiter = client.get_waiter('instance_registered')
Polls OpsWorks.Client.describe_instances() every 15 seconds until a successful state is reached. An error is returned after 40 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
StackId='string',
LayerId='string',
InstanceIds=[
'string',
],
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
An array of instance IDs to be described. If you use this parameter, DescribeInstances returns a description of the specified instances. Otherwise, it returns a description of every instance.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 15
The maximum number of attempts to be made. Default: 40
None
waiter = client.get_waiter('instance_stopped')
Polls OpsWorks.Client.describe_instances() every 15 seconds until a successful state is reached. An error is returned after 40 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
StackId='string',
LayerId='string',
InstanceIds=[
'string',
],
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
An array of instance IDs to be described. If you use this parameter, DescribeInstances returns a description of the specified instances. Otherwise, it returns a description of every instance.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 15
The maximum number of attempts to be made. Default: 40
None
waiter = client.get_waiter('instance_terminated')
Polls OpsWorks.Client.describe_instances() every 15 seconds until a successful state is reached. An error is returned after 40 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
StackId='string',
LayerId='string',
InstanceIds=[
'string',
],
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
An array of instance IDs to be described. If you use this parameter, DescribeInstances returns a description of the specified instances. Otherwise, it returns a description of every instance.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 15
The maximum number of attempts to be made. Default: 40
None