S3Control

Table of Contents

Client

class S3Control.Client

A low-level client representing AWS S3 Control:

client = session.create_client('s3control')

These are the available methods:

can_paginate(operation_name)

Check if an operation can be paginated.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Returns
True if the operation can be paginated, False otherwise.
create_access_point(**kwargs)

Creates an access point and associates it with the specified bucket.

See also: AWS API Documentation

Request Syntax

response = client.create_access_point(
    AccountId='string',
    Name='string',
    Bucket='string',
    VpcConfiguration={
        'VpcId': 'string'
    },
    PublicAccessBlockConfiguration={
        'BlockPublicAcls': True|False,
        'IgnorePublicAcls': True|False,
        'BlockPublicPolicy': True|False,
        'RestrictPublicBuckets': True|False
    }
)
Parameters
  • AccountId (string) --

    [REQUIRED]

    The AWS account ID for the owner of the bucket for which you want to create an access point.

  • Name (string) --

    [REQUIRED]

    The name you want to assign to this access point.

  • Bucket (string) --

    [REQUIRED]

    The name of the bucket that you want to associate this access point with.

  • VpcConfiguration (dict) --

    If you include this field, Amazon S3 restricts access to this access point to requests from the specified Virtual Private Cloud (VPC).

    • VpcId (string) -- [REQUIRED]

      If this field is specified, this access point will only allow connections from the specified VPC ID.

  • PublicAccessBlockConfiguration (dict) --

    The PublicAccessBlock configuration that you want to apply to this Amazon S3 bucket. You can enable the configuration options in any combination. For more information about when Amazon S3 considers a bucket or object public, see The Meaning of "Public" in the Amazon Simple Storage Service Developer Guide.

    • BlockPublicAcls (boolean) --

      Specifies whether Amazon S3 should block public access control lists (ACLs) for buckets in this account. Setting this element to TRUE causes the following behavior:

      • PUT Bucket acl and PUT Object acl calls fail if the specified ACL is public.
      • PUT Object calls fail if the request includes a public ACL.
      • PUT Bucket calls fail if the request includes a public ACL.

      Enabling this setting doesn't affect existing policies or ACLs.

    • IgnorePublicAcls (boolean) --

      Specifies whether Amazon S3 should ignore public ACLs for buckets in this account. Setting this element to TRUE causes Amazon S3 to ignore all public ACLs on buckets in this account and any objects that they contain.

      Enabling this setting doesn't affect the persistence of any existing ACLs and doesn't prevent new public ACLs from being set.

    • BlockPublicPolicy (boolean) --

      Specifies whether Amazon S3 should block public bucket policies for buckets in this account. Setting this element to TRUE causes Amazon S3 to reject calls to PUT Bucket policy if the specified bucket policy allows public access.

      Enabling this setting doesn't affect existing bucket policies.

    • RestrictPublicBuckets (boolean) --

      Specifies whether Amazon S3 should restrict public bucket policies for buckets in this account. Setting this element to TRUE restricts access to buckets with public policies to only AWS services and authorized users within this account.

      Enabling this setting doesn't affect previously stored bucket policies, except that public and cross-account access within any public bucket policy, including non-public delegation to specific accounts, is blocked.

Returns

None

create_job(**kwargs)

Creates an Amazon S3 batch operations job.

See also: AWS API Documentation

Request Syntax

response = client.create_job(
    AccountId='string',
    ConfirmationRequired=True|False,
    Operation={
        'LambdaInvoke': {
            'FunctionArn': 'string'
        },
        'S3PutObjectCopy': {
            'TargetResource': 'string',
            'CannedAccessControlList': 'private'|'public-read'|'public-read-write'|'aws-exec-read'|'authenticated-read'|'bucket-owner-read'|'bucket-owner-full-control',
            'AccessControlGrants': [
                {
                    'Grantee': {
                        'TypeIdentifier': 'id'|'emailAddress'|'uri',
                        'Identifier': 'string',
                        'DisplayName': 'string'
                    },
                    'Permission': 'FULL_CONTROL'|'READ'|'WRITE'|'READ_ACP'|'WRITE_ACP'
                },
            ],
            'MetadataDirective': 'COPY'|'REPLACE',
            'ModifiedSinceConstraint': datetime(2015, 1, 1),
            'NewObjectMetadata': {
                'CacheControl': 'string',
                'ContentDisposition': 'string',
                'ContentEncoding': 'string',
                'ContentLanguage': 'string',
                'UserMetadata': {
                    'string': 'string'
                },
                'ContentLength': 123,
                'ContentMD5': 'string',
                'ContentType': 'string',
                'HttpExpiresDate': datetime(2015, 1, 1),
                'RequesterCharged': True|False,
                'SSEAlgorithm': 'AES256'|'KMS'
            },
            'NewObjectTagging': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ],
            'RedirectLocation': 'string',
            'RequesterPays': True|False,
            'StorageClass': 'STANDARD'|'STANDARD_IA'|'ONEZONE_IA'|'GLACIER'|'INTELLIGENT_TIERING'|'DEEP_ARCHIVE',
            'UnModifiedSinceConstraint': datetime(2015, 1, 1),
            'SSEAwsKmsKeyId': 'string',
            'TargetKeyPrefix': 'string',
            'ObjectLockLegalHoldStatus': 'OFF'|'ON',
            'ObjectLockMode': 'COMPLIANCE'|'GOVERNANCE',
            'ObjectLockRetainUntilDate': datetime(2015, 1, 1)
        },
        'S3PutObjectAcl': {
            'AccessControlPolicy': {
                'AccessControlList': {
                    'Owner': {
                        'ID': 'string',
                        'DisplayName': 'string'
                    },
                    'Grants': [
                        {
                            'Grantee': {
                                'TypeIdentifier': 'id'|'emailAddress'|'uri',
                                'Identifier': 'string',
                                'DisplayName': 'string'
                            },
                            'Permission': 'FULL_CONTROL'|'READ'|'WRITE'|'READ_ACP'|'WRITE_ACP'
                        },
                    ]
                },
                'CannedAccessControlList': 'private'|'public-read'|'public-read-write'|'aws-exec-read'|'authenticated-read'|'bucket-owner-read'|'bucket-owner-full-control'
            }
        },
        'S3PutObjectTagging': {
            'TagSet': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ]
        },
        'S3InitiateRestoreObject': {
            'ExpirationInDays': 123,
            'GlacierJobTier': 'BULK'|'STANDARD'
        }
    },
    Report={
        'Bucket': 'string',
        'Format': 'Report_CSV_20180820',
        'Enabled': True|False,
        'Prefix': 'string',
        'ReportScope': 'AllTasks'|'FailedTasksOnly'
    },
    ClientRequestToken='string',
    Manifest={
        'Spec': {
            'Format': 'S3BatchOperations_CSV_20180820'|'S3InventoryReport_CSV_20161130',
            'Fields': [
                'Ignore'|'Bucket'|'Key'|'VersionId',
            ]
        },
        'Location': {
            'ObjectArn': 'string',
            'ObjectVersionId': 'string',
            'ETag': 'string'
        }
    },
    Description='string',
    Priority=123,
    RoleArn='string'
)
Parameters
  • AccountId (string) -- [REQUIRED]
  • ConfirmationRequired (boolean) -- Indicates whether confirmation is required before Amazon S3 runs the job. Confirmation is only required for jobs created through the Amazon S3 console.
  • Operation (dict) --

    [REQUIRED]

    The operation that you want this job to perform on each object listed in the manifest. For more information about the available operations, see Available Operations in the Amazon Simple Storage Service Developer Guide .

    • LambdaInvoke (dict) --

      Directs the specified job to invoke an AWS Lambda function on each object in the manifest.

      • FunctionArn (string) --

        The Amazon Resource Name (ARN) for the AWS Lambda function that the specified job will invoke for each object in the manifest.

    • S3PutObjectCopy (dict) --

      Directs the specified job to execute a PUT Copy object call on each object in the manifest.

      • TargetResource (string) --
      • CannedAccessControlList (string) --
      • AccessControlGrants (list) --
        • (dict) --
          • Grantee (dict) --
            • TypeIdentifier (string) --
            • Identifier (string) --
            • DisplayName (string) --
          • Permission (string) --
      • MetadataDirective (string) --
      • ModifiedSinceConstraint (datetime) --
      • NewObjectMetadata (dict) --
        • CacheControl (string) --
        • ContentDisposition (string) --
        • ContentEncoding (string) --
        • ContentLanguage (string) --
        • UserMetadata (dict) --
          • (string) --
            • (string) --
        • ContentLength (integer) --
        • ContentMD5 (string) --
        • ContentType (string) --
        • HttpExpiresDate (datetime) --
        • RequesterCharged (boolean) --
        • SSEAlgorithm (string) --
      • NewObjectTagging (list) --
        • (dict) --
          • Key (string) -- [REQUIRED]
          • Value (string) -- [REQUIRED]
      • RedirectLocation (string) --
      • RequesterPays (boolean) --
      • StorageClass (string) --
      • UnModifiedSinceConstraint (datetime) --
      • SSEAwsKmsKeyId (string) --
      • TargetKeyPrefix (string) --
      • ObjectLockLegalHoldStatus (string) --
      • ObjectLockMode (string) --
      • ObjectLockRetainUntilDate (datetime) --
    • S3PutObjectAcl (dict) --

      Directs the specified job to execute a PUT Object acl call on each object in the manifest.

      • AccessControlPolicy (dict) --
        • AccessControlList (dict) --
          • Owner (dict) -- [REQUIRED]
            • ID (string) --
            • DisplayName (string) --
          • Grants (list) --
            • (dict) --
              • Grantee (dict) --
                • TypeIdentifier (string) --
                • Identifier (string) --
                • DisplayName (string) --
              • Permission (string) --
        • CannedAccessControlList (string) --
    • S3PutObjectTagging (dict) --

      Directs the specified job to execute a PUT Object tagging call on each object in the manifest.

      • TagSet (list) --
        • (dict) --
          • Key (string) -- [REQUIRED]
          • Value (string) -- [REQUIRED]
    • S3InitiateRestoreObject (dict) --

      Directs the specified job to execute an Initiate Glacier Restore call on each object in the manifest.

      • ExpirationInDays (integer) --
      • GlacierJobTier (string) --
  • Report (dict) --

    [REQUIRED]

    Configuration parameters for the optional job-completion report.

    • Bucket (string) --

      The Amazon Resource Name (ARN) for the bucket where specified job-completion report will be stored.

    • Format (string) --

      The format of the specified job-completion report.

    • Enabled (boolean) -- [REQUIRED]

      Indicates whether the specified job will generate a job-completion report.

    • Prefix (string) --

      An optional prefix to describe where in the specified bucket the job-completion report will be stored. Amazon S3 will store the job-completion report at <prefix>/job-<job-id>/report.json.

    • ReportScope (string) --

      Indicates whether the job-completion report will include details of all tasks or only failed tasks.

  • ClientRequestToken (string) --

    [REQUIRED]

    An idempotency token to ensure that you don't accidentally submit the same request twice. You can use any string up to the maximum length.

    This field is autopopulated if not provided.

  • Manifest (dict) --

    [REQUIRED]

    Configuration parameters for the manifest.

    • Spec (dict) -- [REQUIRED]

      Describes the format of the specified job's manifest. If the manifest is in CSV format, also describes the columns contained within the manifest.

      • Format (string) -- [REQUIRED]

        Indicates which of the available formats the specified manifest uses.

      • Fields (list) --

        If the specified manifest object is in the S3BatchOperations_CSV_20180820 format, this element describes which columns contain the required data.

        • (string) --
    • Location (dict) -- [REQUIRED]

      Contains the information required to locate the specified job's manifest.

      • ObjectArn (string) -- [REQUIRED]

        The Amazon Resource Name (ARN) for a manifest object.

      • ObjectVersionId (string) --

        The optional version ID to identify a specific version of the manifest object.

      • ETag (string) -- [REQUIRED]

        The ETag for the specified manifest object.

  • Description (string) -- A description for this job. You can use any string within the permitted length. Descriptions don't need to be unique and can be used for multiple jobs.
  • Priority (integer) --

    [REQUIRED]

    The numerical priority for this job. Higher numbers indicate higher priority.

  • RoleArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) for the Identity and Access Management (IAM) Role that batch operations will use to execute this job's operation on each object in the manifest.

Return type

dict

Returns

Response Syntax

{
    'JobId': 'string'
}

Response Structure

  • (dict) --

    • JobId (string) --

      The ID for this job. Amazon S3 generates this ID automatically and returns it after a successful Create Job request.

delete_access_point(**kwargs)

Deletes the specified access point.

See also: AWS API Documentation

Request Syntax

response = client.delete_access_point(
    AccountId='string',
    Name='string'
)
Parameters
  • AccountId (string) --

    [REQUIRED]

    The account ID for the account that owns the specified access point.

  • Name (string) --

    [REQUIRED]

    The name of the access point you want to delete.

Returns

None

delete_access_point_policy(**kwargs)

Deletes the access point policy for the specified access point.

See also: AWS API Documentation

Request Syntax

response = client.delete_access_point_policy(
    AccountId='string',
    Name='string'
)
Parameters
  • AccountId (string) --

    [REQUIRED]

    The account ID for the account that owns the specified access point.

  • Name (string) --

    [REQUIRED]

    The name of the access point whose policy you want to delete.

Returns

None

delete_public_access_block(**kwargs)

Removes the PublicAccessBlock configuration for an Amazon Web Services account.

See also: AWS API Documentation

Request Syntax

response = client.delete_public_access_block(
    AccountId='string'
)
Parameters
AccountId (string) --

[REQUIRED]

The account ID for the Amazon Web Services account whose PublicAccessBlock configuration you want to remove.

Returns
None
describe_job(**kwargs)

Retrieves the configuration parameters and status for a batch operations job.

See also: AWS API Documentation

Request Syntax

response = client.describe_job(
    AccountId='string',
    JobId='string'
)
Parameters
  • AccountId (string) -- [REQUIRED]
  • JobId (string) --

    [REQUIRED]

    The ID for the job whose information you want to retrieve.

Return type

dict

Returns

Response Syntax

{
    'Job': {
        'JobId': 'string',
        'ConfirmationRequired': True|False,
        'Description': 'string',
        'JobArn': 'string',
        'Status': 'Active'|'Cancelled'|'Cancelling'|'Complete'|'Completing'|'Failed'|'Failing'|'New'|'Paused'|'Pausing'|'Preparing'|'Ready'|'Suspended',
        'Manifest': {
            'Spec': {
                'Format': 'S3BatchOperations_CSV_20180820'|'S3InventoryReport_CSV_20161130',
                'Fields': [
                    'Ignore'|'Bucket'|'Key'|'VersionId',
                ]
            },
            'Location': {
                'ObjectArn': 'string',
                'ObjectVersionId': 'string',
                'ETag': 'string'
            }
        },
        'Operation': {
            'LambdaInvoke': {
                'FunctionArn': 'string'
            },
            'S3PutObjectCopy': {
                'TargetResource': 'string',
                'CannedAccessControlList': 'private'|'public-read'|'public-read-write'|'aws-exec-read'|'authenticated-read'|'bucket-owner-read'|'bucket-owner-full-control',
                'AccessControlGrants': [
                    {
                        'Grantee': {
                            'TypeIdentifier': 'id'|'emailAddress'|'uri',
                            'Identifier': 'string',
                            'DisplayName': 'string'
                        },
                        'Permission': 'FULL_CONTROL'|'READ'|'WRITE'|'READ_ACP'|'WRITE_ACP'
                    },
                ],
                'MetadataDirective': 'COPY'|'REPLACE',
                'ModifiedSinceConstraint': datetime(2015, 1, 1),
                'NewObjectMetadata': {
                    'CacheControl': 'string',
                    'ContentDisposition': 'string',
                    'ContentEncoding': 'string',
                    'ContentLanguage': 'string',
                    'UserMetadata': {
                        'string': 'string'
                    },
                    'ContentLength': 123,
                    'ContentMD5': 'string',
                    'ContentType': 'string',
                    'HttpExpiresDate': datetime(2015, 1, 1),
                    'RequesterCharged': True|False,
                    'SSEAlgorithm': 'AES256'|'KMS'
                },
                'NewObjectTagging': [
                    {
                        'Key': 'string',
                        'Value': 'string'
                    },
                ],
                'RedirectLocation': 'string',
                'RequesterPays': True|False,
                'StorageClass': 'STANDARD'|'STANDARD_IA'|'ONEZONE_IA'|'GLACIER'|'INTELLIGENT_TIERING'|'DEEP_ARCHIVE',
                'UnModifiedSinceConstraint': datetime(2015, 1, 1),
                'SSEAwsKmsKeyId': 'string',
                'TargetKeyPrefix': 'string',
                'ObjectLockLegalHoldStatus': 'OFF'|'ON',
                'ObjectLockMode': 'COMPLIANCE'|'GOVERNANCE',
                'ObjectLockRetainUntilDate': datetime(2015, 1, 1)
            },
            'S3PutObjectAcl': {
                'AccessControlPolicy': {
                    'AccessControlList': {
                        'Owner': {
                            'ID': 'string',
                            'DisplayName': 'string'
                        },
                        'Grants': [
                            {
                                'Grantee': {
                                    'TypeIdentifier': 'id'|'emailAddress'|'uri',
                                    'Identifier': 'string',
                                    'DisplayName': 'string'
                                },
                                'Permission': 'FULL_CONTROL'|'READ'|'WRITE'|'READ_ACP'|'WRITE_ACP'
                            },
                        ]
                    },
                    'CannedAccessControlList': 'private'|'public-read'|'public-read-write'|'aws-exec-read'|'authenticated-read'|'bucket-owner-read'|'bucket-owner-full-control'
                }
            },
            'S3PutObjectTagging': {
                'TagSet': [
                    {
                        'Key': 'string',
                        'Value': 'string'
                    },
                ]
            },
            'S3InitiateRestoreObject': {
                'ExpirationInDays': 123,
                'GlacierJobTier': 'BULK'|'STANDARD'
            }
        },
        'Priority': 123,
        'ProgressSummary': {
            'TotalNumberOfTasks': 123,
            'NumberOfTasksSucceeded': 123,
            'NumberOfTasksFailed': 123
        },
        'StatusUpdateReason': 'string',
        'FailureReasons': [
            {
                'FailureCode': 'string',
                'FailureReason': 'string'
            },
        ],
        'Report': {
            'Bucket': 'string',
            'Format': 'Report_CSV_20180820',
            'Enabled': True|False,
            'Prefix': 'string',
            'ReportScope': 'AllTasks'|'FailedTasksOnly'
        },
        'CreationTime': datetime(2015, 1, 1),
        'TerminationDate': datetime(2015, 1, 1),
        'RoleArn': 'string',
        'SuspendedDate': datetime(2015, 1, 1),
        'SuspendedCause': 'string'
    }
}

Response Structure

  • (dict) --

    • Job (dict) --

      Contains the configuration parameters and status for the job specified in the Describe Job request.

      • JobId (string) --

        The ID for the specified job.

      • ConfirmationRequired (boolean) --

        Indicates whether confirmation is required before Amazon S3 begins running the specified job. Confirmation is required only for jobs created through the Amazon S3 console.

      • Description (string) --

        The description for this job, if one was provided in this job's Create Job request.

      • JobArn (string) --

        The Amazon Resource Name (ARN) for this job.

      • Status (string) --

        The current status of the specified job.

      • Manifest (dict) --

        The configuration information for the specified job's manifest object.

        • Spec (dict) --

          Describes the format of the specified job's manifest. If the manifest is in CSV format, also describes the columns contained within the manifest.

          • Format (string) --

            Indicates which of the available formats the specified manifest uses.

          • Fields (list) --

            If the specified manifest object is in the S3BatchOperations_CSV_20180820 format, this element describes which columns contain the required data.

            • (string) --
        • Location (dict) --

          Contains the information required to locate the specified job's manifest.

          • ObjectArn (string) --

            The Amazon Resource Name (ARN) for a manifest object.

          • ObjectVersionId (string) --

            The optional version ID to identify a specific version of the manifest object.

          • ETag (string) --

            The ETag for the specified manifest object.

      • Operation (dict) --

        The operation that the specified job is configured to execute on the objects listed in the manifest.

        • LambdaInvoke (dict) --

          Directs the specified job to invoke an AWS Lambda function on each object in the manifest.

          • FunctionArn (string) --

            The Amazon Resource Name (ARN) for the AWS Lambda function that the specified job will invoke for each object in the manifest.

        • S3PutObjectCopy (dict) --

          Directs the specified job to execute a PUT Copy object call on each object in the manifest.

          • TargetResource (string) --
          • CannedAccessControlList (string) --
          • AccessControlGrants (list) --
            • (dict) --
              • Grantee (dict) --
                • TypeIdentifier (string) --
                • Identifier (string) --
                • DisplayName (string) --
              • Permission (string) --
          • MetadataDirective (string) --
          • ModifiedSinceConstraint (datetime) --
          • NewObjectMetadata (dict) --
            • CacheControl (string) --
            • ContentDisposition (string) --
            • ContentEncoding (string) --
            • ContentLanguage (string) --
            • UserMetadata (dict) --
              • (string) --
                • (string) --
            • ContentLength (integer) --
            • ContentMD5 (string) --
            • ContentType (string) --
            • HttpExpiresDate (datetime) --
            • RequesterCharged (boolean) --
            • SSEAlgorithm (string) --
          • NewObjectTagging (list) --
            • (dict) --
              • Key (string) --
              • Value (string) --
          • RedirectLocation (string) --
          • RequesterPays (boolean) --
          • StorageClass (string) --
          • UnModifiedSinceConstraint (datetime) --
          • SSEAwsKmsKeyId (string) --
          • TargetKeyPrefix (string) --
          • ObjectLockLegalHoldStatus (string) --
          • ObjectLockMode (string) --
          • ObjectLockRetainUntilDate (datetime) --
        • S3PutObjectAcl (dict) --

          Directs the specified job to execute a PUT Object acl call on each object in the manifest.

          • AccessControlPolicy (dict) --
            • AccessControlList (dict) --
              • Owner (dict) --
                • ID (string) --
                • DisplayName (string) --
              • Grants (list) --
                • (dict) --
                  • Grantee (dict) --
                    • TypeIdentifier (string) --
                    • Identifier (string) --
                    • DisplayName (string) --
                  • Permission (string) --
            • CannedAccessControlList (string) --
        • S3PutObjectTagging (dict) --

          Directs the specified job to execute a PUT Object tagging call on each object in the manifest.

          • TagSet (list) --
            • (dict) --
              • Key (string) --
              • Value (string) --
        • S3InitiateRestoreObject (dict) --

          Directs the specified job to execute an Initiate Glacier Restore call on each object in the manifest.

          • ExpirationInDays (integer) --
          • GlacierJobTier (string) --
      • Priority (integer) --

        The priority of the specified job.

      • ProgressSummary (dict) --

        Describes the total number of tasks that the specified job has executed, the number of tasks that succeeded, and the number of tasks that failed.

        • TotalNumberOfTasks (integer) --
        • NumberOfTasksSucceeded (integer) --
        • NumberOfTasksFailed (integer) --
      • StatusUpdateReason (string) --

      • FailureReasons (list) --

        If the specified job failed, this field contains information describing the failure.

        • (dict) --

          If this job failed, this element indicates why the job failed.

          • FailureCode (string) --

            The failure code, if any, for the specified job.

          • FailureReason (string) --

            The failure reason, if any, for the specified job.

      • Report (dict) --

        Contains the configuration information for the job-completion report if you requested one in the Create Job request.

        • Bucket (string) --

          The Amazon Resource Name (ARN) for the bucket where specified job-completion report will be stored.

        • Format (string) --

          The format of the specified job-completion report.

        • Enabled (boolean) --

          Indicates whether the specified job will generate a job-completion report.

        • Prefix (string) --

          An optional prefix to describe where in the specified bucket the job-completion report will be stored. Amazon S3 will store the job-completion report at <prefix>/job-<job-id>/report.json.

        • ReportScope (string) --

          Indicates whether the job-completion report will include details of all tasks or only failed tasks.

      • CreationTime (datetime) --

        A timestamp indicating when this job was created.

      • TerminationDate (datetime) --

        A timestamp indicating when this job terminated. A job's termination date is the date and time when it succeeded, failed, or was canceled.

      • RoleArn (string) --

        The Amazon Resource Name (ARN) for the Identity and Access Management (IAM) Role assigned to execute the tasks for this job.

      • SuspendedDate (datetime) --

        The timestamp when this job was suspended, if it has been suspended.

      • SuspendedCause (string) --

        The reason why the specified job was suspended. A job is only suspended if you create it through the Amazon S3 console. When you create the job, it enters the Suspended state to await confirmation before running. After you confirm the job, it automatically exits the Suspended state.

generate_presigned_url(ClientMethod, Params=None, ExpiresIn=3600, HttpMethod=None)

Generate a presigned url given a client, its method, and arguments

Parameters
  • ClientMethod (string) -- The client method to presign for
  • Params (dict) -- The parameters normally passed to ClientMethod.
  • ExpiresIn (int) -- The number of seconds the presigned url is valid for. By default it expires in an hour (3600 seconds)
  • HttpMethod (string) -- The http method to use on the generated url. By default, the http method is whatever is used in the method's model.
Returns

The presigned url

get_access_point(**kwargs)

Returns configuration information about the specified access point.

See also: AWS API Documentation

Request Syntax

response = client.get_access_point(
    AccountId='string',
    Name='string'
)
Parameters
  • AccountId (string) --

    [REQUIRED]

    The account ID for the account that owns the specified access point.

  • Name (string) --

    [REQUIRED]

    The name of the access point whose configuration information you want to retrieve.

Return type

dict

Returns

Response Syntax

{
    'Name': 'string',
    'Bucket': 'string',
    'NetworkOrigin': 'Internet'|'VPC',
    'VpcConfiguration': {
        'VpcId': 'string'
    },
    'PublicAccessBlockConfiguration': {
        'BlockPublicAcls': True|False,
        'IgnorePublicAcls': True|False,
        'BlockPublicPolicy': True|False,
        'RestrictPublicBuckets': True|False
    },
    'CreationDate': datetime(2015, 1, 1)
}

Response Structure

  • (dict) --

    • Name (string) --

      The name of the specified access point.

    • Bucket (string) --

      The name of the bucket associated with the specified access point.

    • NetworkOrigin (string) --

      Indicates whether this access point allows access from the public Internet. If VpcConfiguration is specified for this access point, then NetworkOrigin is VPC , and the access point doesn't allow access from the public Internet. Otherwise, NetworkOrigin is Internet , and the access point allows access from the public Internet, subject to the access point and bucket access policies.

    • VpcConfiguration (dict) --

      Contains the Virtual Private Cloud (VPC) configuration for the specified access point.

      • VpcId (string) --

        If this field is specified, this access point will only allow connections from the specified VPC ID.

    • PublicAccessBlockConfiguration (dict) --

      The PublicAccessBlock configuration that you want to apply to this Amazon S3 bucket. You can enable the configuration options in any combination. For more information about when Amazon S3 considers a bucket or object public, see The Meaning of "Public" in the Amazon Simple Storage Service Developer Guide.

      • BlockPublicAcls (boolean) --

        Specifies whether Amazon S3 should block public access control lists (ACLs) for buckets in this account. Setting this element to TRUE causes the following behavior:

        • PUT Bucket acl and PUT Object acl calls fail if the specified ACL is public.
        • PUT Object calls fail if the request includes a public ACL.
        • PUT Bucket calls fail if the request includes a public ACL.

        Enabling this setting doesn't affect existing policies or ACLs.

      • IgnorePublicAcls (boolean) --

        Specifies whether Amazon S3 should ignore public ACLs for buckets in this account. Setting this element to TRUE causes Amazon S3 to ignore all public ACLs on buckets in this account and any objects that they contain.

        Enabling this setting doesn't affect the persistence of any existing ACLs and doesn't prevent new public ACLs from being set.

      • BlockPublicPolicy (boolean) --

        Specifies whether Amazon S3 should block public bucket policies for buckets in this account. Setting this element to TRUE causes Amazon S3 to reject calls to PUT Bucket policy if the specified bucket policy allows public access.

        Enabling this setting doesn't affect existing bucket policies.

      • RestrictPublicBuckets (boolean) --

        Specifies whether Amazon S3 should restrict public bucket policies for buckets in this account. Setting this element to TRUE restricts access to buckets with public policies to only AWS services and authorized users within this account.

        Enabling this setting doesn't affect previously stored bucket policies, except that public and cross-account access within any public bucket policy, including non-public delegation to specific accounts, is blocked.

    • CreationDate (datetime) --

      The date and time when the specified access point was created.

get_access_point_policy(**kwargs)

Returns the access point policy associated with the specified access point.

See also: AWS API Documentation

Request Syntax

response = client.get_access_point_policy(
    AccountId='string',
    Name='string'
)
Parameters
  • AccountId (string) --

    [REQUIRED]

    The account ID for the account that owns the specified access point.

  • Name (string) --

    [REQUIRED]

    The name of the access point whose policy you want to retrieve.

Return type

dict

Returns

Response Syntax

{
    'Policy': 'string'
}

Response Structure

  • (dict) --

    • Policy (string) --

      The access point policy associated with the specified access point.

get_access_point_policy_status(**kwargs)

Indicates whether the specified access point currently has a policy that allows public access. For more information about public access through access points, see Managing Data Access with Amazon S3 Access Points in the Amazon Simple Storage Service Developer Guide .

See also: AWS API Documentation

Request Syntax

response = client.get_access_point_policy_status(
    AccountId='string',
    Name='string'
)
Parameters
  • AccountId (string) --

    [REQUIRED]

    The account ID for the account that owns the specified access point.

  • Name (string) --

    [REQUIRED]

    The name of the access point whose policy status you want to retrieve.

Return type

dict

Returns

Response Syntax

{
    'PolicyStatus': {
        'IsPublic': True|False
    }
}

Response Structure

  • (dict) --

    • PolicyStatus (dict) --

      Indicates the current policy status of the specified access point.

      • IsPublic (boolean) --

get_paginator(operation_name)

Create a paginator for an operation.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Raises OperationNotPageableError
Raised if the operation is not pageable. You can use the client.can_paginate method to check if an operation is pageable.
Return type
L{botocore.paginate.Paginator}
Returns
A paginator object.
get_public_access_block(**kwargs)

Retrieves the PublicAccessBlock configuration for an Amazon Web Services account.

See also: AWS API Documentation

Request Syntax

response = client.get_public_access_block(
    AccountId='string'
)
Parameters
AccountId (string) --

[REQUIRED]

The account ID for the Amazon Web Services account whose PublicAccessBlock configuration you want to retrieve.

Return type
dict
Returns
Response Syntax
{
    'PublicAccessBlockConfiguration': {
        'BlockPublicAcls': True|False,
        'IgnorePublicAcls': True|False,
        'BlockPublicPolicy': True|False,
        'RestrictPublicBuckets': True|False
    }
}

Response Structure

  • (dict) --
    • PublicAccessBlockConfiguration (dict) --

      The PublicAccessBlock configuration currently in effect for this Amazon Web Services account.

      • BlockPublicAcls (boolean) --

        Specifies whether Amazon S3 should block public access control lists (ACLs) for buckets in this account. Setting this element to TRUE causes the following behavior:

        • PUT Bucket acl and PUT Object acl calls fail if the specified ACL is public.
        • PUT Object calls fail if the request includes a public ACL.
        • PUT Bucket calls fail if the request includes a public ACL.

        Enabling this setting doesn't affect existing policies or ACLs.

      • IgnorePublicAcls (boolean) --

        Specifies whether Amazon S3 should ignore public ACLs for buckets in this account. Setting this element to TRUE causes Amazon S3 to ignore all public ACLs on buckets in this account and any objects that they contain.

        Enabling this setting doesn't affect the persistence of any existing ACLs and doesn't prevent new public ACLs from being set.

      • BlockPublicPolicy (boolean) --

        Specifies whether Amazon S3 should block public bucket policies for buckets in this account. Setting this element to TRUE causes Amazon S3 to reject calls to PUT Bucket policy if the specified bucket policy allows public access.

        Enabling this setting doesn't affect existing bucket policies.

      • RestrictPublicBuckets (boolean) --

        Specifies whether Amazon S3 should restrict public bucket policies for buckets in this account. Setting this element to TRUE restricts access to buckets with public policies to only AWS services and authorized users within this account.

        Enabling this setting doesn't affect previously stored bucket policies, except that public and cross-account access within any public bucket policy, including non-public delegation to specific accounts, is blocked.

get_waiter(waiter_name)

Returns an object that can wait for some condition.

Parameters
waiter_name (str) -- The name of the waiter to get. See the waiters section of the service docs for a list of available waiters.
Returns
The specified waiter object.
Return type
botocore.waiter.Waiter
list_access_points(**kwargs)

Returns a list of the access points currently associated with the specified bucket. You can retrieve up to 1000 access points per call. If the specified bucket has more than 1000 access points (or the number specified in maxResults , whichever is less), then the response will include a continuation token that you can use to list the additional access points.

See also: AWS API Documentation

Request Syntax

response = client.list_access_points(
    AccountId='string',
    Bucket='string',
    NextToken='string',
    MaxResults=123
)
Parameters
  • AccountId (string) --

    [REQUIRED]

    The AWS account ID for owner of the bucket whose access points you want to list.

  • Bucket (string) -- The name of the bucket whose associated access points you want to list.
  • NextToken (string) -- A continuation token. If a previous call to ListAccessPoints returned a continuation token in the NextToken field, then providing that value here causes Amazon S3 to retrieve the next page of results.
  • MaxResults (integer) -- The maximum number of access points that you want to include in the list. If the specified bucket has more than this number of access points, then the response will include a continuation token in the NextToken field that you can use to retrieve the next page of access points.
Return type

dict

Returns

Response Syntax

{
    'AccessPointList': [
        {
            'Name': 'string',
            'NetworkOrigin': 'Internet'|'VPC',
            'VpcConfiguration': {
                'VpcId': 'string'
            },
            'Bucket': 'string'
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • AccessPointList (list) --

      Contains identification and configuration information for one or more access points associated with the specified bucket.

      • (dict) --

        An access point used to access a bucket.

        • Name (string) --

          The name of this access point.

        • NetworkOrigin (string) --

          Indicates whether this access point allows access from the public Internet. If VpcConfiguration is specified for this access point, then NetworkOrigin is VPC , and the access point doesn't allow access from the public Internet. Otherwise, NetworkOrigin is Internet , and the access point allows access from the public Internet, subject to the access point and bucket access policies.

        • VpcConfiguration (dict) --

          The Virtual Private Cloud (VPC) configuration for this access point, if one exists.

          • VpcId (string) --

            If this field is specified, this access point will only allow connections from the specified VPC ID.

        • Bucket (string) --

          The name of the bucket associated with this access point.

    • NextToken (string) --

      If the specified bucket has more access points than can be returned in one call to this API, then this field contains a continuation token that you can provide in subsequent calls to this API to retrieve additional access points.

list_jobs(**kwargs)

Lists current jobs and jobs that have ended within the last 30 days for the AWS account making the request.

See also: AWS API Documentation

Request Syntax

response = client.list_jobs(
    AccountId='string',
    JobStatuses=[
        'Active'|'Cancelled'|'Cancelling'|'Complete'|'Completing'|'Failed'|'Failing'|'New'|'Paused'|'Pausing'|'Preparing'|'Ready'|'Suspended',
    ],
    NextToken='string',
    MaxResults=123
)
Parameters
  • AccountId (string) -- [REQUIRED]
  • JobStatuses (list) --

    The List Jobs request returns jobs that match the statuses listed in this element.

    • (string) --
  • NextToken (string) -- A pagination token to request the next page of results. Use the token that Amazon S3 returned in the NextToken element of the ListJobsResult from the previous List Jobs request.
  • MaxResults (integer) -- The maximum number of jobs that Amazon S3 will include in the List Jobs response. If there are more jobs than this number, the response will include a pagination token in the NextToken field to enable you to retrieve the next page of results.
Return type

dict

Returns

Response Syntax

{
    'NextToken': 'string',
    'Jobs': [
        {
            'JobId': 'string',
            'Description': 'string',
            'Operation': 'LambdaInvoke'|'S3PutObjectCopy'|'S3PutObjectAcl'|'S3PutObjectTagging'|'S3InitiateRestoreObject',
            'Priority': 123,
            'Status': 'Active'|'Cancelled'|'Cancelling'|'Complete'|'Completing'|'Failed'|'Failing'|'New'|'Paused'|'Pausing'|'Preparing'|'Ready'|'Suspended',
            'CreationTime': datetime(2015, 1, 1),
            'TerminationDate': datetime(2015, 1, 1),
            'ProgressSummary': {
                'TotalNumberOfTasks': 123,
                'NumberOfTasksSucceeded': 123,
                'NumberOfTasksFailed': 123
            }
        },
    ]
}

Response Structure

  • (dict) --

    • NextToken (string) --

      If the List Jobs request produced more than the maximum number of results, you can pass this value into a subsequent List Jobs request in order to retrieve the next page of results.

    • Jobs (list) --

      The list of current jobs and jobs that have ended within the last 30 days.

      • (dict) --

        Contains the configuration and status information for a single job retrieved as part of a job list.

        • JobId (string) --

          The ID for the specified job.

        • Description (string) --

          The user-specified description that was included in the specified job's Create Job request.

        • Operation (string) --

          The operation that the specified job is configured to run on each object listed in the manifest.

        • Priority (integer) --

          The current priority for the specified job.

        • Status (string) --

          The specified job's current status.

        • CreationTime (datetime) --

          A timestamp indicating when the specified job was created.

        • TerminationDate (datetime) --

          A timestamp indicating when the specified job terminated. A job's termination date is the date and time when it succeeded, failed, or was canceled.

        • ProgressSummary (dict) --

          Describes the total number of tasks that the specified job has executed, the number of tasks that succeeded, and the number of tasks that failed.

          • TotalNumberOfTasks (integer) --
          • NumberOfTasksSucceeded (integer) --
          • NumberOfTasksFailed (integer) --

put_access_point_policy(**kwargs)

Associates an access policy with the specified access point. Each access point can have only one policy, so a request made to this API replaces any existing policy associated with the specified access point.

See also: AWS API Documentation

Request Syntax

response = client.put_access_point_policy(
    AccountId='string',
    Name='string',
    Policy='string'
)
Parameters
  • AccountId (string) --

    [REQUIRED]

    The AWS account ID for owner of the bucket associated with the specified access point.

  • Name (string) --

    [REQUIRED]

    The name of the access point that you want to associate with the specified policy.

  • Policy (string) --

    [REQUIRED]

    The policy that you want to apply to the specified access point. For more information about access point policies, see Managing Data Access with Amazon S3 Access Points in the Amazon Simple Storage Service Developer Guide .

Returns

None

put_public_access_block(**kwargs)

Creates or modifies the PublicAccessBlock configuration for an Amazon Web Services account.

See also: AWS API Documentation

Request Syntax

response = client.put_public_access_block(
    PublicAccessBlockConfiguration={
        'BlockPublicAcls': True|False,
        'IgnorePublicAcls': True|False,
        'BlockPublicPolicy': True|False,
        'RestrictPublicBuckets': True|False
    },
    AccountId='string'
)
Parameters
  • PublicAccessBlockConfiguration (dict) --

    [REQUIRED]

    The PublicAccessBlock configuration that you want to apply to the specified Amazon Web Services account.

    • BlockPublicAcls (boolean) --

      Specifies whether Amazon S3 should block public access control lists (ACLs) for buckets in this account. Setting this element to TRUE causes the following behavior:

      • PUT Bucket acl and PUT Object acl calls fail if the specified ACL is public.
      • PUT Object calls fail if the request includes a public ACL.
      • PUT Bucket calls fail if the request includes a public ACL.

      Enabling this setting doesn't affect existing policies or ACLs.

    • IgnorePublicAcls (boolean) --

      Specifies whether Amazon S3 should ignore public ACLs for buckets in this account. Setting this element to TRUE causes Amazon S3 to ignore all public ACLs on buckets in this account and any objects that they contain.

      Enabling this setting doesn't affect the persistence of any existing ACLs and doesn't prevent new public ACLs from being set.

    • BlockPublicPolicy (boolean) --

      Specifies whether Amazon S3 should block public bucket policies for buckets in this account. Setting this element to TRUE causes Amazon S3 to reject calls to PUT Bucket policy if the specified bucket policy allows public access.

      Enabling this setting doesn't affect existing bucket policies.

    • RestrictPublicBuckets (boolean) --

      Specifies whether Amazon S3 should restrict public bucket policies for buckets in this account. Setting this element to TRUE restricts access to buckets with public policies to only AWS services and authorized users within this account.

      Enabling this setting doesn't affect previously stored bucket policies, except that public and cross-account access within any public bucket policy, including non-public delegation to specific accounts, is blocked.

  • AccountId (string) --

    [REQUIRED]

    The account ID for the Amazon Web Services account whose PublicAccessBlock configuration you want to set.

Returns

None

update_job_priority(**kwargs)

Updates an existing job's priority.

See also: AWS API Documentation

Request Syntax

response = client.update_job_priority(
    AccountId='string',
    JobId='string',
    Priority=123
)
Parameters
  • AccountId (string) -- [REQUIRED]
  • JobId (string) --

    [REQUIRED]

    The ID for the job whose priority you want to update.

  • Priority (integer) --

    [REQUIRED]

    The priority you want to assign to this job.

Return type

dict

Returns

Response Syntax

{
    'JobId': 'string',
    'Priority': 123
}

Response Structure

  • (dict) --

    • JobId (string) --

      The ID for the job whose priority Amazon S3 updated.

    • Priority (integer) --

      The new priority assigned to the specified job.

update_job_status(**kwargs)

Updates the status for the specified job. Use this operation to confirm that you want to run a job or to cancel an existing job.

See also: AWS API Documentation

Request Syntax

response = client.update_job_status(
    AccountId='string',
    JobId='string',
    RequestedJobStatus='Cancelled'|'Ready',
    StatusUpdateReason='string'
)
Parameters
  • AccountId (string) -- [REQUIRED]
  • JobId (string) --

    [REQUIRED]

    The ID of the job whose status you want to update.

  • RequestedJobStatus (string) --

    [REQUIRED]

    The status that you want to move the specified job to.

  • StatusUpdateReason (string) -- A description of the reason why you want to change the specified job's status. This field can be any string up to the maximum length.
Return type

dict

Returns

Response Syntax

{
    'JobId': 'string',
    'Status': 'Active'|'Cancelled'|'Cancelling'|'Complete'|'Completing'|'Failed'|'Failing'|'New'|'Paused'|'Pausing'|'Preparing'|'Ready'|'Suspended',
    'StatusUpdateReason': 'string'
}

Response Structure

  • (dict) --

    • JobId (string) --

      The ID for the job whose status was updated.

    • Status (string) --

      The current status for the specified job.

    • StatusUpdateReason (string) --

      The reason that the specified job's status was updated.

Paginators

The available paginators are: