FSx

Table of Contents

Client

class FSx.Client

A low-level client representing Amazon FSx:

client = session.create_client('fsx')

These are the available methods:

can_paginate(operation_name)

Check if an operation can be paginated.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Returns
True if the operation can be paginated, False otherwise.
create_backup(**kwargs)

Creates a backup of an existing Amazon FSx for Windows File Server file system. Creating regular backups for your file system is a best practice that complements the replication that Amazon FSx for Windows File Server performs for your file system. It also enables you to restore from user modification of data.

If a backup with the specified client request token exists, and the parameters match, this operation returns the description of the existing backup. If a backup specified client request token exists, and the parameters don't match, this operation returns IncompatibleParameterError . If a backup with the specified client request token doesn't exist, CreateBackup does the following:

  • Creates a new Amazon FSx backup with an assigned ID, and an initial lifecycle state of CREATING .
  • Returns the description of the backup.

By using the idempotent operation, you can retry a CreateBackup operation without the risk of creating an extra backup. This approach can be useful when an initial call fails in a way that makes it unclear whether a backup was created. If you use the same client request token and the initial call created a backup, the operation returns a successful result because all the parameters are the same.

The CreateFileSystem operation returns while the backup's lifecycle state is still CREATING . You can check the file system creation status by calling the DescribeBackups operation, which returns the backup state along with other information.

See also: AWS API Documentation

Request Syntax

response = client.create_backup(
    FileSystemId='string',
    ClientRequestToken='string',
    Tags=[
        {
            'Key': 'string',
            'Value': 'string'
        },
    ]
)
Parameters
  • FileSystemId (string) --

    [REQUIRED]

    The ID of the file system to back up.

  • ClientRequestToken (string) --

    (Optional) A string of up to 64 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the AWS Command Line Interface (AWS CLI) or an AWS SDK.

    This field is autopopulated if not provided.

  • Tags (list) --

    The tags to apply to the backup at backup creation. The key value of the Name tag appears in the console as the backup name.

    • (dict) --

      Specifies a key-value pair for a resource tag.

      • Key (string) --

        A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

      • Value (string) --

        A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

Return type

dict

Returns

Response Syntax

{
    'Backup': {
        'BackupId': 'string',
        'Lifecycle': 'AVAILABLE'|'CREATING'|'DELETED'|'FAILED',
        'FailureDetails': {
            'Message': 'string'
        },
        'Type': 'AUTOMATIC'|'USER_INITIATED',
        'ProgressPercent': 123,
        'CreationTime': datetime(2015, 1, 1),
        'KmsKeyId': 'string',
        'ResourceARN': 'string',
        'Tags': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ],
        'FileSystem': {
            'OwnerId': 'string',
            'CreationTime': datetime(2015, 1, 1),
            'FileSystemId': 'string',
            'FileSystemType': 'WINDOWS'|'LUSTRE',
            'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING',
            'FailureDetails': {
                'Message': 'string'
            },
            'StorageCapacity': 123,
            'VpcId': 'string',
            'SubnetIds': [
                'string',
            ],
            'NetworkInterfaceIds': [
                'string',
            ],
            'DNSName': 'string',
            'KmsKeyId': 'string',
            'ResourceARN': 'string',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ],
            'WindowsConfiguration': {
                'ActiveDirectoryId': 'string',
                'ThroughputCapacity': 123,
                'MaintenanceOperationsInProgress': [
                    'PATCHING'|'BACKING_UP',
                ],
                'WeeklyMaintenanceStartTime': 'string',
                'DailyAutomaticBackupStartTime': 'string',
                'AutomaticBackupRetentionDays': 123,
                'CopyTagsToBackups': True|False
            },
            'LustreConfiguration': {
                'WeeklyMaintenanceStartTime': 'string',
                'DataRepositoryConfiguration': {
                    'ImportPath': 'string',
                    'ExportPath': 'string',
                    'ImportedFileChunkSize': 123
                }
            }
        }
    }
}

Response Structure

  • (dict) --

    The response object for the CreateBackup operation.

    • Backup (dict) --

      A description of the backup.

      • BackupId (string) --

        The ID of the backup.

      • Lifecycle (string) --

        The lifecycle status of the backup.

      • FailureDetails (dict) --

        Details explaining any failures that occur when creating a backup.

        • Message (string) --

          A message describing the backup creation failure.

      • Type (string) --

        The type of the backup.

      • ProgressPercent (integer) --

        The current percent of progress of an asynchronous task.

      • CreationTime (datetime) --

        The time when a particular backup was created.

      • KmsKeyId (string) --

        The ID of the AWS Key Management Service (AWS KMS) key used to encrypt this backup's data.

      • ResourceARN (string) --

        The Amazon Resource Name (ARN) for the backup resource.

      • Tags (list) --

        Tags associated with a particular file system.

        • (dict) --

          Specifies a key-value pair for a resource tag.

          • Key (string) --

            A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

          • Value (string) --

            A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

      • FileSystem (dict) --

        Metadata of the file system associated with the backup. This metadata is persisted even if the file system is deleted.

        • OwnerId (string) --

          The AWS account that created the file system. If the file system was created by an IAM user, the AWS account to which the IAM user belongs is the owner.

        • CreationTime (datetime) --

          The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.

        • FileSystemId (string) --

          The eight-digit ID of the file system that was automatically assigned by Amazon FSx.

        • FileSystemType (string) --

          Type of file system. Currently the only supported type is WINDOWS.

        • Lifecycle (string) --

          The lifecycle status of the file system.

        • FailureDetails (dict) --

          Structure providing details of any failures that occur when creating the file system has failed.

          • Message (string) --

            Message describing the failures that occurred during file system creation.

        • StorageCapacity (integer) --

          The storage capacity of the file system in gigabytes.

        • VpcId (string) --

          The ID of the primary VPC for the file system.

        • SubnetIds (list) --

          The IDs of the subnets to contain the endpoint for the file system. One and only one is supported. The file system is launched in the Availability Zone associated with this subnet.

          • (string) --

            The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

        • NetworkInterfaceIds (list) --

          The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.

          For an Amazon FSx for Windows File Server file system, you can have one network interface Id. For an Amazon FSx for Lustre file system, you can have more than one.

          • (string) --

            An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .

        • DNSName (string) --

          The DNS name for the file system.

        • KmsKeyId (string) --

          The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for an Amazon FSx for Windows File Server file system.

        • ResourceARN (string) --

          The resource ARN of the file system.

        • Tags (list) --

          The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .

          • (dict) --

            Specifies a key-value pair for a resource tag.

            • Key (string) --

              A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

            • Value (string) --

              A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

        • WindowsConfiguration (dict) --

          The configuration for this Microsoft Windows file system.

          • ActiveDirectoryId (string) --

            The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.

          • ThroughputCapacity (integer) --

            The throughput of an Amazon FSx file system, measured in megabytes per second.

          • MaintenanceOperationsInProgress (list) --

            The list of maintenance operations in progress for this file system.

            • (string) --

              An enumeration specifying the currently ongoing maintenance operation.

          • WeeklyMaintenanceStartTime (string) --

            The preferred time to perform weekly maintenance, in the UTC time zone.

          • DailyAutomaticBackupStartTime (string) --

            The preferred time to take daily automatic backups, in the UTC time zone.

          • AutomaticBackupRetentionDays (integer) --

            The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 35 days.

          • CopyTagsToBackups (boolean) --

            A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups.

        • LustreConfiguration (dict) --

          The configuration for the Amazon FSx for Lustre file system.

          • WeeklyMaintenanceStartTime (string) --

            The UTC time that you want to begin your weekly maintenance window.

          • DataRepositoryConfiguration (dict) --

            The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.

            • ImportPath (string) --

              The import path to the Amazon S3 bucket (and optional prefix) that you're using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.

            • ExportPath (string) --

              The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.

            • ImportedFileChunkSize (integer) --

              For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.

              The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.

create_file_system(**kwargs)

Creates a new, empty Amazon FSx file system.

If a file system with the specified client request token exists and the parameters match, CreateFileSystem returns the description of the existing file system. If a file system specified client request token exists and the parameters don't match, this call returns IncompatibleParameterError . If a file system with the specified client request token doesn't exist, CreateFileSystem does the following:

  • Creates a new, empty Amazon FSx file system with an assigned ID, and an initial lifecycle state of CREATING .
  • Returns the description of the file system.

This operation requires a client request token in the request that Amazon FSx uses to ensure idempotent creation. This means that calling the operation multiple times with the same client request token has no effect. By using the idempotent operation, you can retry a CreateFileSystem operation without the risk of creating an extra file system. This approach can be useful when an initial call fails in a way that makes it unclear whether a file system was created. Examples are if a transport level timeout occurred, or your connection was reset. If you use the same client request token and the initial call created a file system, the client receives success as long as the parameters are the same.

Note

The CreateFileSystem call returns while the file system's lifecycle state is still CREATING . You can check the file-system creation status by calling the DescribeFileSystems operation, which returns the file system state along with other information.

See also: AWS API Documentation

Request Syntax

response = client.create_file_system(
    ClientRequestToken='string',
    FileSystemType='WINDOWS'|'LUSTRE',
    StorageCapacity=123,
    SubnetIds=[
        'string',
    ],
    SecurityGroupIds=[
        'string',
    ],
    Tags=[
        {
            'Key': 'string',
            'Value': 'string'
        },
    ],
    KmsKeyId='string',
    WindowsConfiguration={
        'ActiveDirectoryId': 'string',
        'ThroughputCapacity': 123,
        'WeeklyMaintenanceStartTime': 'string',
        'DailyAutomaticBackupStartTime': 'string',
        'AutomaticBackupRetentionDays': 123,
        'CopyTagsToBackups': True|False
    },
    LustreConfiguration={
        'WeeklyMaintenanceStartTime': 'string',
        'ImportPath': 'string',
        'ExportPath': 'string',
        'ImportedFileChunkSize': 123
    }
)
Parameters
  • ClientRequestToken (string) --

    (Optional) A string of up to 64 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the AWS Command Line Interface (AWS CLI) or an AWS SDK.

    This field is autopopulated if not provided.

  • FileSystemType (string) --

    [REQUIRED]

    The type of file system.

  • StorageCapacity (integer) --

    [REQUIRED]

    The storage capacity of the file system.

    For Windows file systems, the storage capacity has a minimum of 300 GiB, and a maximum of 65,536 GiB.

    For Lustre file systems, the storage capacity has a minimum of 3,600 GiB. Storage capacity is provisioned in increments of 3,600 GiB.

  • SubnetIds (list) --

    [REQUIRED]

    A list of IDs for the subnets that the file system will be accessible from. File systems support only one subnet. The file server is also launched in that subnet's Availability Zone.

    • (string) --

      The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

  • SecurityGroupIds (list) --

    A list of IDs for the security groups that apply to the specified network interfaces created for file system access. These security groups will apply to all network interfaces. This list isn't returned in later describe requests.

    • (string) --

      The ID of your Amazon EC2 security group. This ID is used to control network access to the endpoint that Amazon FSx creates on your behalf in each subnet. For more information, see Amazon EC2 Security Groups for Linux Instances in the Amazon EC2 User Guide .

  • Tags (list) --

    The tags to be applied to the file system at file system creation. The key value of the Name tag appears in the console as the file system name.

    • (dict) --

      Specifies a key-value pair for a resource tag.

      • Key (string) --

        A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

      • Value (string) --

        A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

  • KmsKeyId (string) -- The ID of your AWS Key Management Service (AWS KMS) key. This ID is used to encrypt the data in your file system at rest. For more information, see Encrypt in the AWS Key Management Service API Reference .
  • WindowsConfiguration (dict) --

    The configuration for this Microsoft Windows file system.

    • ActiveDirectoryId (string) --

      The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.

    • ThroughputCapacity (integer) -- [REQUIRED]

      The throughput of an Amazon FSx file system, measured in megabytes per second.

    • WeeklyMaintenanceStartTime (string) --

      The preferred start time to perform weekly maintenance, in the UTC time zone.

    • DailyAutomaticBackupStartTime (string) --

      The preferred time to take daily automatic backups, in the UTC time zone.

    • AutomaticBackupRetentionDays (integer) --

      The number of days to retain automatic backups. The default is to retain backups for 7 days. Setting this value to 0 disables the creation of automatic backups. The maximum retention period for backups is 35 days.

    • CopyTagsToBackups (boolean) --

      A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups.

  • LustreConfiguration (dict) --

    The configuration object for Lustre file systems used in the CreateFileSystem operation.

    • WeeklyMaintenanceStartTime (string) --

      The preferred time to perform weekly maintenance, in the UTC time zone.

    • ImportPath (string) --

      (Optional) The path to the Amazon S3 bucket (including the optional prefix) that you're using as the data repository for your Amazon FSx for Lustre file system. The root of your FSx for Lustre file system will be mapped to the root of the Amazon S3 bucket you select. An example is s3://import-bucket/optional-prefix . If you specify a prefix after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.

    • ExportPath (string) --

      (Optional) The path in Amazon S3 where the root of your Amazon FSx file system is exported. The path must use the same Amazon S3 bucket as specified in ImportPath. You can provide an optional prefix to which new and changed data is to be exported from your Amazon FSx for Lustre file system. If an ExportPath value is not provided, Amazon FSx sets a default export path, s3://import-bucket/FSxLustre[creation-timestamp] . The timestamp is in UTC format, for example s3://import-bucket/FSxLustre20181105T222312Z .

      The Amazon S3 export bucket must be the same as the import bucket specified by ImportPath . If you only specify a bucket name, such as s3://import-bucket , you get a 1:1 mapping of file system objects to S3 bucket objects. This mapping means that the input data in S3 is overwritten on export. If you provide a custom prefix in the export path, such as s3://import-bucket/[custom-optional-prefix] , Amazon FSx exports the contents of your file system to that export prefix in the Amazon S3 bucket.

    • ImportedFileChunkSize (integer) --

      (Optional) For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.

      The chunk size default is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.

Return type

dict

Returns

Response Syntax

{
    'FileSystem': {
        'OwnerId': 'string',
        'CreationTime': datetime(2015, 1, 1),
        'FileSystemId': 'string',
        'FileSystemType': 'WINDOWS'|'LUSTRE',
        'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING',
        'FailureDetails': {
            'Message': 'string'
        },
        'StorageCapacity': 123,
        'VpcId': 'string',
        'SubnetIds': [
            'string',
        ],
        'NetworkInterfaceIds': [
            'string',
        ],
        'DNSName': 'string',
        'KmsKeyId': 'string',
        'ResourceARN': 'string',
        'Tags': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ],
        'WindowsConfiguration': {
            'ActiveDirectoryId': 'string',
            'ThroughputCapacity': 123,
            'MaintenanceOperationsInProgress': [
                'PATCHING'|'BACKING_UP',
            ],
            'WeeklyMaintenanceStartTime': 'string',
            'DailyAutomaticBackupStartTime': 'string',
            'AutomaticBackupRetentionDays': 123,
            'CopyTagsToBackups': True|False
        },
        'LustreConfiguration': {
            'WeeklyMaintenanceStartTime': 'string',
            'DataRepositoryConfiguration': {
                'ImportPath': 'string',
                'ExportPath': 'string',
                'ImportedFileChunkSize': 123
            }
        }
    }
}

Response Structure

  • (dict) --

    The response object for the CreateFileSystem operation.

    • FileSystem (dict) --

      A description of the file system.

      • OwnerId (string) --

        The AWS account that created the file system. If the file system was created by an IAM user, the AWS account to which the IAM user belongs is the owner.

      • CreationTime (datetime) --

        The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.

      • FileSystemId (string) --

        The eight-digit ID of the file system that was automatically assigned by Amazon FSx.

      • FileSystemType (string) --

        Type of file system. Currently the only supported type is WINDOWS.

      • Lifecycle (string) --

        The lifecycle status of the file system.

      • FailureDetails (dict) --

        Structure providing details of any failures that occur when creating the file system has failed.

        • Message (string) --

          Message describing the failures that occurred during file system creation.

      • StorageCapacity (integer) --

        The storage capacity of the file system in gigabytes.

      • VpcId (string) --

        The ID of the primary VPC for the file system.

      • SubnetIds (list) --

        The IDs of the subnets to contain the endpoint for the file system. One and only one is supported. The file system is launched in the Availability Zone associated with this subnet.

        • (string) --

          The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

      • NetworkInterfaceIds (list) --

        The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.

        For an Amazon FSx for Windows File Server file system, you can have one network interface Id. For an Amazon FSx for Lustre file system, you can have more than one.

        • (string) --

          An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .

      • DNSName (string) --

        The DNS name for the file system.

      • KmsKeyId (string) --

        The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for an Amazon FSx for Windows File Server file system.

      • ResourceARN (string) --

        The resource ARN of the file system.

      • Tags (list) --

        The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .

        • (dict) --

          Specifies a key-value pair for a resource tag.

          • Key (string) --

            A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

          • Value (string) --

            A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

      • WindowsConfiguration (dict) --

        The configuration for this Microsoft Windows file system.

        • ActiveDirectoryId (string) --

          The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.

        • ThroughputCapacity (integer) --

          The throughput of an Amazon FSx file system, measured in megabytes per second.

        • MaintenanceOperationsInProgress (list) --

          The list of maintenance operations in progress for this file system.

          • (string) --

            An enumeration specifying the currently ongoing maintenance operation.

        • WeeklyMaintenanceStartTime (string) --

          The preferred time to perform weekly maintenance, in the UTC time zone.

        • DailyAutomaticBackupStartTime (string) --

          The preferred time to take daily automatic backups, in the UTC time zone.

        • AutomaticBackupRetentionDays (integer) --

          The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 35 days.

        • CopyTagsToBackups (boolean) --

          A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups.

      • LustreConfiguration (dict) --

        The configuration for the Amazon FSx for Lustre file system.

        • WeeklyMaintenanceStartTime (string) --

          The UTC time that you want to begin your weekly maintenance window.

        • DataRepositoryConfiguration (dict) --

          The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.

          • ImportPath (string) --

            The import path to the Amazon S3 bucket (and optional prefix) that you're using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.

          • ExportPath (string) --

            The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.

          • ImportedFileChunkSize (integer) --

            For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.

            The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.

create_file_system_from_backup(**kwargs)

Creates a new Amazon FSx file system from an existing Amazon FSx for Windows File Server backup.

If a file system with the specified client request token exists and the parameters match, this call returns the description of the existing file system. If a client request token specified by the file system exists and the parameters don't match, this call returns IncompatibleParameterError . If a file system with the specified client request token doesn't exist, this operation does the following:

  • Creates a new Amazon FSx file system from backup with an assigned ID, and an initial lifecycle state of CREATING .
  • Returns the description of the file system.

Parameters like Active Directory, default share name, automatic backup, and backup settings default to the parameters of the file system that was backed up, unless overridden. You can explicitly supply other settings.

By using the idempotent operation, you can retry a CreateFileSystemFromBackup call without the risk of creating an extra file system. This approach can be useful when an initial call fails in a way that makes it unclear whether a file system was created. Examples are if a transport level timeout occurred, or your connection was reset. If you use the same client request token and the initial call created a file system, the client receives success as long as the parameters are the same.

Note

The CreateFileSystemFromBackup call returns while the file system's lifecycle state is still CREATING . You can check the file-system creation status by calling the DescribeFileSystems operation, which returns the file system state along with other information.

See also: AWS API Documentation

Request Syntax

response = client.create_file_system_from_backup(
    BackupId='string',
    ClientRequestToken='string',
    SubnetIds=[
        'string',
    ],
    SecurityGroupIds=[
        'string',
    ],
    Tags=[
        {
            'Key': 'string',
            'Value': 'string'
        },
    ],
    WindowsConfiguration={
        'ActiveDirectoryId': 'string',
        'ThroughputCapacity': 123,
        'WeeklyMaintenanceStartTime': 'string',
        'DailyAutomaticBackupStartTime': 'string',
        'AutomaticBackupRetentionDays': 123,
        'CopyTagsToBackups': True|False
    }
)
Parameters
  • BackupId (string) --

    [REQUIRED]

    The ID of the backup.

  • ClientRequestToken (string) --

    (Optional) A string of up to 64 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the AWS Command Line Interface (AWS CLI) or an AWS SDK.

    This field is autopopulated if not provided.

  • SubnetIds (list) --

    [REQUIRED]

    A list of IDs for the subnets that the file system will be accessible from. Currently, you can specify only one subnet. The file server is also launched in that subnet's Availability Zone.

    • (string) --

      The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

  • SecurityGroupIds (list) --

    A list of IDs for the security groups that apply to the specified network interfaces created for file system access. These security groups apply to all network interfaces. This value isn't returned in later describe requests.

    • (string) --

      The ID of your Amazon EC2 security group. This ID is used to control network access to the endpoint that Amazon FSx creates on your behalf in each subnet. For more information, see Amazon EC2 Security Groups for Linux Instances in the Amazon EC2 User Guide .

  • Tags (list) --

    The tags to be applied to the file system at file system creation. The key value of the Name tag appears in the console as the file system name.

    • (dict) --

      Specifies a key-value pair for a resource tag.

      • Key (string) --

        A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

      • Value (string) --

        A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

  • WindowsConfiguration (dict) --

    The configuration for this Microsoft Windows file system.

    • ActiveDirectoryId (string) --

      The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.

    • ThroughputCapacity (integer) -- [REQUIRED]

      The throughput of an Amazon FSx file system, measured in megabytes per second.

    • WeeklyMaintenanceStartTime (string) --

      The preferred start time to perform weekly maintenance, in the UTC time zone.

    • DailyAutomaticBackupStartTime (string) --

      The preferred time to take daily automatic backups, in the UTC time zone.

    • AutomaticBackupRetentionDays (integer) --

      The number of days to retain automatic backups. The default is to retain backups for 7 days. Setting this value to 0 disables the creation of automatic backups. The maximum retention period for backups is 35 days.

    • CopyTagsToBackups (boolean) --

      A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups.

Return type

dict

Returns

Response Syntax

{
    'FileSystem': {
        'OwnerId': 'string',
        'CreationTime': datetime(2015, 1, 1),
        'FileSystemId': 'string',
        'FileSystemType': 'WINDOWS'|'LUSTRE',
        'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING',
        'FailureDetails': {
            'Message': 'string'
        },
        'StorageCapacity': 123,
        'VpcId': 'string',
        'SubnetIds': [
            'string',
        ],
        'NetworkInterfaceIds': [
            'string',
        ],
        'DNSName': 'string',
        'KmsKeyId': 'string',
        'ResourceARN': 'string',
        'Tags': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ],
        'WindowsConfiguration': {
            'ActiveDirectoryId': 'string',
            'ThroughputCapacity': 123,
            'MaintenanceOperationsInProgress': [
                'PATCHING'|'BACKING_UP',
            ],
            'WeeklyMaintenanceStartTime': 'string',
            'DailyAutomaticBackupStartTime': 'string',
            'AutomaticBackupRetentionDays': 123,
            'CopyTagsToBackups': True|False
        },
        'LustreConfiguration': {
            'WeeklyMaintenanceStartTime': 'string',
            'DataRepositoryConfiguration': {
                'ImportPath': 'string',
                'ExportPath': 'string',
                'ImportedFileChunkSize': 123
            }
        }
    }
}

Response Structure

  • (dict) --

    The response object for the CreateFileSystemFromBackup operation.

    • FileSystem (dict) --

      A description of the file system.

      • OwnerId (string) --

        The AWS account that created the file system. If the file system was created by an IAM user, the AWS account to which the IAM user belongs is the owner.

      • CreationTime (datetime) --

        The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.

      • FileSystemId (string) --

        The eight-digit ID of the file system that was automatically assigned by Amazon FSx.

      • FileSystemType (string) --

        Type of file system. Currently the only supported type is WINDOWS.

      • Lifecycle (string) --

        The lifecycle status of the file system.

      • FailureDetails (dict) --

        Structure providing details of any failures that occur when creating the file system has failed.

        • Message (string) --

          Message describing the failures that occurred during file system creation.

      • StorageCapacity (integer) --

        The storage capacity of the file system in gigabytes.

      • VpcId (string) --

        The ID of the primary VPC for the file system.

      • SubnetIds (list) --

        The IDs of the subnets to contain the endpoint for the file system. One and only one is supported. The file system is launched in the Availability Zone associated with this subnet.

        • (string) --

          The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

      • NetworkInterfaceIds (list) --

        The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.

        For an Amazon FSx for Windows File Server file system, you can have one network interface Id. For an Amazon FSx for Lustre file system, you can have more than one.

        • (string) --

          An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .

      • DNSName (string) --

        The DNS name for the file system.

      • KmsKeyId (string) --

        The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for an Amazon FSx for Windows File Server file system.

      • ResourceARN (string) --

        The resource ARN of the file system.

      • Tags (list) --

        The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .

        • (dict) --

          Specifies a key-value pair for a resource tag.

          • Key (string) --

            A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

          • Value (string) --

            A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

      • WindowsConfiguration (dict) --

        The configuration for this Microsoft Windows file system.

        • ActiveDirectoryId (string) --

          The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.

        • ThroughputCapacity (integer) --

          The throughput of an Amazon FSx file system, measured in megabytes per second.

        • MaintenanceOperationsInProgress (list) --

          The list of maintenance operations in progress for this file system.

          • (string) --

            An enumeration specifying the currently ongoing maintenance operation.

        • WeeklyMaintenanceStartTime (string) --

          The preferred time to perform weekly maintenance, in the UTC time zone.

        • DailyAutomaticBackupStartTime (string) --

          The preferred time to take daily automatic backups, in the UTC time zone.

        • AutomaticBackupRetentionDays (integer) --

          The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 35 days.

        • CopyTagsToBackups (boolean) --

          A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups.

      • LustreConfiguration (dict) --

        The configuration for the Amazon FSx for Lustre file system.

        • WeeklyMaintenanceStartTime (string) --

          The UTC time that you want to begin your weekly maintenance window.

        • DataRepositoryConfiguration (dict) --

          The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.

          • ImportPath (string) --

            The import path to the Amazon S3 bucket (and optional prefix) that you're using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.

          • ExportPath (string) --

            The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.

          • ImportedFileChunkSize (integer) --

            For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.

            The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.

delete_backup(**kwargs)

Deletes an Amazon FSx for Windows File Server backup, deleting its contents. After deletion, the backup no longer exists, and its data is gone.

The DeleteBackup call returns instantly. The backup will not show up in later DescribeBackups calls.

Warning

The data in a deleted backup is also deleted and can't be recovered by any means.

See also: AWS API Documentation

Request Syntax

response = client.delete_backup(
    BackupId='string',
    ClientRequestToken='string'
)
Parameters
  • BackupId (string) --

    [REQUIRED]

    The ID of the backup you want to delete.

  • ClientRequestToken (string) --

    (Optional) A string of up to 64 ASCII characters that Amazon FSx uses to ensure idempotent deletion. This is automatically filled on your behalf when using the AWS CLI or SDK.

    This field is autopopulated if not provided.

Return type

dict

Returns

Response Syntax

{
    'BackupId': 'string',
    'Lifecycle': 'AVAILABLE'|'CREATING'|'DELETED'|'FAILED'
}

Response Structure

  • (dict) --

    The response object for DeleteBackup operation.

    • BackupId (string) --

      The ID of the backup deleted.

    • Lifecycle (string) --

      The lifecycle of the backup. Should be DELETED .

delete_file_system(**kwargs)

Deletes a file system, deleting its contents. After deletion, the file system no longer exists, and its data is gone. Any existing automatic backups will also be deleted.

By default, when you delete an Amazon FSx for Windows File Server file system, a final backup is created upon deletion. This final backup is not subject to the file system's retention policy, and must be manually deleted.

The DeleteFileSystem action returns while the file system has the DELETING status. You can check the file system deletion status by calling the DescribeFileSystems action, which returns a list of file systems in your account. If you pass the file system ID for a deleted file system, the DescribeFileSystems returns a FileSystemNotFound error.

Warning

The data in a deleted file system is also deleted and can't be recovered by any means.

See also: AWS API Documentation

Request Syntax

response = client.delete_file_system(
    FileSystemId='string',
    ClientRequestToken='string',
    WindowsConfiguration={
        'SkipFinalBackup': True|False,
        'FinalBackupTags': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ]
    }
)
Parameters
  • FileSystemId (string) --

    [REQUIRED]

    The ID of the file system you want to delete.

  • ClientRequestToken (string) --

    (Optional) A string of up to 64 ASCII characters that Amazon FSx uses to ensure idempotent deletion. This is automatically filled on your behalf when using the AWS CLI or SDK.

    This field is autopopulated if not provided.

  • WindowsConfiguration (dict) --

    The configuration object for the Microsoft Windows file system used in the DeleteFileSystem operation.

    • SkipFinalBackup (boolean) --

      By default, Amazon FSx for Windows takes a final backup on your behalf when the DeleteFileSystem operation is invoked. Doing this helps protect you from data loss, and we highly recommend taking the final backup. If you want to skip this backup, use this flag to do so.

    • FinalBackupTags (list) --

      A set of tags for your final backup.

      • (dict) --

        Specifies a key-value pair for a resource tag.

        • Key (string) --

          A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

        • Value (string) --

          A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

Return type

dict

Returns

Response Syntax

{
    'FileSystemId': 'string',
    'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING',
    'WindowsResponse': {
        'FinalBackupId': 'string',
        'FinalBackupTags': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ]
    }
}

Response Structure

  • (dict) --

    The response object for the DeleteFileSystem operation.

    • FileSystemId (string) --

      The ID of the file system being deleted.

    • Lifecycle (string) --

      The file system lifecycle for the deletion request. Should be DELETING .

    • WindowsResponse (dict) --

      The response object for the Microsoft Windows file system used in the DeleteFileSystem operation.

      • FinalBackupId (string) --

        The ID of the final backup for this file system.

      • FinalBackupTags (list) --

        The set of tags applied to the final backup.

        • (dict) --

          Specifies a key-value pair for a resource tag.

          • Key (string) --

            A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

          • Value (string) --

            A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

describe_backups(**kwargs)

Returns the description of specific Amazon FSx for Windows File Server backups, if a BackupIds value is provided for that backup. Otherwise, it returns all backups owned by your AWS account in the AWS Region of the endpoint that you're calling.

When retrieving all backups, you can optionally specify the MaxResults parameter to limit the number of backups in a response. If more backups remain, Amazon FSx returns a NextToken value in the response. In this case, send a later request with the NextToken request parameter set to the value of NextToken from the last response.

This action is used in an iterative process to retrieve a list of your backups. DescribeBackups is called first without a NextToken value. Then the action continues to be called with the NextToken parameter set to the value of the last NextToken value until a response has no NextToken .

When using this action, keep the following in mind:

  • The implementation might return fewer than MaxResults file system descriptions while still including a NextToken value.
  • The order of backups returned in the response of one DescribeBackups call and the order of backups returned across the responses of a multi-call iteration is unspecified.

See also: AWS API Documentation

Request Syntax

response = client.describe_backups(
    BackupIds=[
        'string',
    ],
    Filters=[
        {
            'Name': 'file-system-id'|'backup-type',
            'Values': [
                'string',
            ]
        },
    ],
    MaxResults=123,
    NextToken='string'
)
Parameters
  • BackupIds (list) --

    (Optional) IDs of the backups you want to retrieve (String). This overrides any filters. If any IDs are not found, BackupNotFound will be thrown.

    • (string) --

      The ID of the backup.

  • Filters (list) --

    (Optional) Filters structure. Supported names are file-system-id and backup-type.

    • (dict) --

      A filter used to restrict the results of describe calls. You can use multiple filters to return results that meet all applied filter requirements.

      • Name (string) --

        The name for this filter.

      • Values (list) --

        The values of the filter. These are all the values for any of the applied filters.

        • (string) --

          The value for a filter.

  • MaxResults (integer) -- (Optional) Maximum number of backups to return in the response (integer). This parameter value must be greater than 0. The number of items that Amazon FSx returns is the minimum of the MaxResults parameter specified in the request and the service's internal maximum number of items per page.
  • NextToken (string) -- (Optional) Opaque pagination token returned from a previous DescribeBackups operation (String). If a token present, the action continues the list from where the returning call left off.
Return type

dict

Returns

Response Syntax

{
    'Backups': [
        {
            'BackupId': 'string',
            'Lifecycle': 'AVAILABLE'|'CREATING'|'DELETED'|'FAILED',
            'FailureDetails': {
                'Message': 'string'
            },
            'Type': 'AUTOMATIC'|'USER_INITIATED',
            'ProgressPercent': 123,
            'CreationTime': datetime(2015, 1, 1),
            'KmsKeyId': 'string',
            'ResourceARN': 'string',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ],
            'FileSystem': {
                'OwnerId': 'string',
                'CreationTime': datetime(2015, 1, 1),
                'FileSystemId': 'string',
                'FileSystemType': 'WINDOWS'|'LUSTRE',
                'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING',
                'FailureDetails': {
                    'Message': 'string'
                },
                'StorageCapacity': 123,
                'VpcId': 'string',
                'SubnetIds': [
                    'string',
                ],
                'NetworkInterfaceIds': [
                    'string',
                ],
                'DNSName': 'string',
                'KmsKeyId': 'string',
                'ResourceARN': 'string',
                'Tags': [
                    {
                        'Key': 'string',
                        'Value': 'string'
                    },
                ],
                'WindowsConfiguration': {
                    'ActiveDirectoryId': 'string',
                    'ThroughputCapacity': 123,
                    'MaintenanceOperationsInProgress': [
                        'PATCHING'|'BACKING_UP',
                    ],
                    'WeeklyMaintenanceStartTime': 'string',
                    'DailyAutomaticBackupStartTime': 'string',
                    'AutomaticBackupRetentionDays': 123,
                    'CopyTagsToBackups': True|False
                },
                'LustreConfiguration': {
                    'WeeklyMaintenanceStartTime': 'string',
                    'DataRepositoryConfiguration': {
                        'ImportPath': 'string',
                        'ExportPath': 'string',
                        'ImportedFileChunkSize': 123
                    }
                }
            }
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    Response object for DescribeBackups operation.

    • Backups (list) --

      Any array of backups.

      • (dict) --

        A backup of an Amazon FSx for Windows File Server file system. You can create a new file system from a backup to protect against data loss.

        • BackupId (string) --

          The ID of the backup.

        • Lifecycle (string) --

          The lifecycle status of the backup.

        • FailureDetails (dict) --

          Details explaining any failures that occur when creating a backup.

          • Message (string) --

            A message describing the backup creation failure.

        • Type (string) --

          The type of the backup.

        • ProgressPercent (integer) --

          The current percent of progress of an asynchronous task.

        • CreationTime (datetime) --

          The time when a particular backup was created.

        • KmsKeyId (string) --

          The ID of the AWS Key Management Service (AWS KMS) key used to encrypt this backup's data.

        • ResourceARN (string) --

          The Amazon Resource Name (ARN) for the backup resource.

        • Tags (list) --

          Tags associated with a particular file system.

          • (dict) --

            Specifies a key-value pair for a resource tag.

            • Key (string) --

              A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

            • Value (string) --

              A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

        • FileSystem (dict) --

          Metadata of the file system associated with the backup. This metadata is persisted even if the file system is deleted.

          • OwnerId (string) --

            The AWS account that created the file system. If the file system was created by an IAM user, the AWS account to which the IAM user belongs is the owner.

          • CreationTime (datetime) --

            The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.

          • FileSystemId (string) --

            The eight-digit ID of the file system that was automatically assigned by Amazon FSx.

          • FileSystemType (string) --

            Type of file system. Currently the only supported type is WINDOWS.

          • Lifecycle (string) --

            The lifecycle status of the file system.

          • FailureDetails (dict) --

            Structure providing details of any failures that occur when creating the file system has failed.

            • Message (string) --

              Message describing the failures that occurred during file system creation.

          • StorageCapacity (integer) --

            The storage capacity of the file system in gigabytes.

          • VpcId (string) --

            The ID of the primary VPC for the file system.

          • SubnetIds (list) --

            The IDs of the subnets to contain the endpoint for the file system. One and only one is supported. The file system is launched in the Availability Zone associated with this subnet.

            • (string) --

              The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

          • NetworkInterfaceIds (list) --

            The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.

            For an Amazon FSx for Windows File Server file system, you can have one network interface Id. For an Amazon FSx for Lustre file system, you can have more than one.

            • (string) --

              An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .

          • DNSName (string) --

            The DNS name for the file system.

          • KmsKeyId (string) --

            The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for an Amazon FSx for Windows File Server file system.

          • ResourceARN (string) --

            The resource ARN of the file system.

          • Tags (list) --

            The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .

            • (dict) --

              Specifies a key-value pair for a resource tag.

              • Key (string) --

                A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

              • Value (string) --

                A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

          • WindowsConfiguration (dict) --

            The configuration for this Microsoft Windows file system.

            • ActiveDirectoryId (string) --

              The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.

            • ThroughputCapacity (integer) --

              The throughput of an Amazon FSx file system, measured in megabytes per second.

            • MaintenanceOperationsInProgress (list) --

              The list of maintenance operations in progress for this file system.

              • (string) --

                An enumeration specifying the currently ongoing maintenance operation.

            • WeeklyMaintenanceStartTime (string) --

              The preferred time to perform weekly maintenance, in the UTC time zone.

            • DailyAutomaticBackupStartTime (string) --

              The preferred time to take daily automatic backups, in the UTC time zone.

            • AutomaticBackupRetentionDays (integer) --

              The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 35 days.

            • CopyTagsToBackups (boolean) --

              A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups.

          • LustreConfiguration (dict) --

            The configuration for the Amazon FSx for Lustre file system.

            • WeeklyMaintenanceStartTime (string) --

              The UTC time that you want to begin your weekly maintenance window.

            • DataRepositoryConfiguration (dict) --

              The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.

              • ImportPath (string) --

                The import path to the Amazon S3 bucket (and optional prefix) that you're using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.

              • ExportPath (string) --

                The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.

              • ImportedFileChunkSize (integer) --

                For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.

                The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.

    • NextToken (string) --

      This is present if there are more backups than returned in the response (String). You can use the NextToken value in the later request to fetch the backups.

describe_file_systems(**kwargs)

Returns the description of specific Amazon FSx file systems, if a FileSystemIds value is provided for that file system. Otherwise, it returns descriptions of all file systems owned by your AWS account in the AWS Region of the endpoint that you're calling.

When retrieving all file system descriptions, you can optionally specify the MaxResults parameter to limit the number of descriptions in a response. If more file system descriptions remain, Amazon FSx returns a NextToken value in the response. In this case, send a later request with the NextToken request parameter set to the value of NextToken from the last response.

This action is used in an iterative process to retrieve a list of your file system descriptions. DescribeFileSystems is called first without a NextToken value. Then the action continues to be called with the NextToken parameter set to the value of the last NextToken value until a response has no NextToken .

When using this action, keep the following in mind:

  • The implementation might return fewer than MaxResults file system descriptions while still including a NextToken value.
  • The order of file systems returned in the response of one DescribeFileSystems call and the order of file systems returned across the responses of a multicall iteration is unspecified.

See also: AWS API Documentation

Request Syntax

response = client.describe_file_systems(
    FileSystemIds=[
        'string',
    ],
    MaxResults=123,
    NextToken='string'
)
Parameters
  • FileSystemIds (list) --

    (Optional) IDs of the file systems whose descriptions you want to retrieve (String).

    • (string) --

      The globally unique ID of the file system, assigned by Amazon FSx.

  • MaxResults (integer) -- (Optional) Maximum number of file systems to return in the response (integer). This parameter value must be greater than 0. The number of items that Amazon FSx returns is the minimum of the MaxResults parameter specified in the request and the service's internal maximum number of items per page.
  • NextToken (string) -- (Optional) Opaque pagination token returned from a previous DescribeFileSystems operation (String). If a token present, the action continues the list from where the returning call left off.
Return type

dict

Returns

Response Syntax

{
    'FileSystems': [
        {
            'OwnerId': 'string',
            'CreationTime': datetime(2015, 1, 1),
            'FileSystemId': 'string',
            'FileSystemType': 'WINDOWS'|'LUSTRE',
            'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING',
            'FailureDetails': {
                'Message': 'string'
            },
            'StorageCapacity': 123,
            'VpcId': 'string',
            'SubnetIds': [
                'string',
            ],
            'NetworkInterfaceIds': [
                'string',
            ],
            'DNSName': 'string',
            'KmsKeyId': 'string',
            'ResourceARN': 'string',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ],
            'WindowsConfiguration': {
                'ActiveDirectoryId': 'string',
                'ThroughputCapacity': 123,
                'MaintenanceOperationsInProgress': [
                    'PATCHING'|'BACKING_UP',
                ],
                'WeeklyMaintenanceStartTime': 'string',
                'DailyAutomaticBackupStartTime': 'string',
                'AutomaticBackupRetentionDays': 123,
                'CopyTagsToBackups': True|False
            },
            'LustreConfiguration': {
                'WeeklyMaintenanceStartTime': 'string',
                'DataRepositoryConfiguration': {
                    'ImportPath': 'string',
                    'ExportPath': 'string',
                    'ImportedFileChunkSize': 123
                }
            }
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    The response object for DescribeFileSystems operation.

    • FileSystems (list) --

      An array of file system descriptions.

      • (dict) --

        A description of a specific Amazon FSx file system.

        • OwnerId (string) --

          The AWS account that created the file system. If the file system was created by an IAM user, the AWS account to which the IAM user belongs is the owner.

        • CreationTime (datetime) --

          The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.

        • FileSystemId (string) --

          The eight-digit ID of the file system that was automatically assigned by Amazon FSx.

        • FileSystemType (string) --

          Type of file system. Currently the only supported type is WINDOWS.

        • Lifecycle (string) --

          The lifecycle status of the file system.

        • FailureDetails (dict) --

          Structure providing details of any failures that occur when creating the file system has failed.

          • Message (string) --

            Message describing the failures that occurred during file system creation.

        • StorageCapacity (integer) --

          The storage capacity of the file system in gigabytes.

        • VpcId (string) --

          The ID of the primary VPC for the file system.

        • SubnetIds (list) --

          The IDs of the subnets to contain the endpoint for the file system. One and only one is supported. The file system is launched in the Availability Zone associated with this subnet.

          • (string) --

            The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

        • NetworkInterfaceIds (list) --

          The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.

          For an Amazon FSx for Windows File Server file system, you can have one network interface Id. For an Amazon FSx for Lustre file system, you can have more than one.

          • (string) --

            An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .

        • DNSName (string) --

          The DNS name for the file system.

        • KmsKeyId (string) --

          The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for an Amazon FSx for Windows File Server file system.

        • ResourceARN (string) --

          The resource ARN of the file system.

        • Tags (list) --

          The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .

          • (dict) --

            Specifies a key-value pair for a resource tag.

            • Key (string) --

              A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

            • Value (string) --

              A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

        • WindowsConfiguration (dict) --

          The configuration for this Microsoft Windows file system.

          • ActiveDirectoryId (string) --

            The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.

          • ThroughputCapacity (integer) --

            The throughput of an Amazon FSx file system, measured in megabytes per second.

          • MaintenanceOperationsInProgress (list) --

            The list of maintenance operations in progress for this file system.

            • (string) --

              An enumeration specifying the currently ongoing maintenance operation.

          • WeeklyMaintenanceStartTime (string) --

            The preferred time to perform weekly maintenance, in the UTC time zone.

          • DailyAutomaticBackupStartTime (string) --

            The preferred time to take daily automatic backups, in the UTC time zone.

          • AutomaticBackupRetentionDays (integer) --

            The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 35 days.

          • CopyTagsToBackups (boolean) --

            A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups.

        • LustreConfiguration (dict) --

          The configuration for the Amazon FSx for Lustre file system.

          • WeeklyMaintenanceStartTime (string) --

            The UTC time that you want to begin your weekly maintenance window.

          • DataRepositoryConfiguration (dict) --

            The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.

            • ImportPath (string) --

              The import path to the Amazon S3 bucket (and optional prefix) that you're using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.

            • ExportPath (string) --

              The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.

            • ImportedFileChunkSize (integer) --

              For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.

              The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.

    • NextToken (string) --

      Present if there are more file systems than returned in the response (String). You can use the NextToken value in the later request to fetch the descriptions.

generate_presigned_url(ClientMethod, Params=None, ExpiresIn=3600, HttpMethod=None)

Generate a presigned url given a client, its method, and arguments

Parameters
  • ClientMethod (string) -- The client method to presign for
  • Params (dict) -- The parameters normally passed to ClientMethod.
  • ExpiresIn (int) -- The number of seconds the presigned url is valid for. By default it expires in an hour (3600 seconds)
  • HttpMethod (string) -- The http method to use on the generated url. By default, the http method is whatever is used in the method's model.
Returns

The presigned url

get_paginator(operation_name)

Create a paginator for an operation.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Raises OperationNotPageableError
Raised if the operation is not pageable. You can use the client.can_paginate method to check if an operation is pageable.
Return type
L{botocore.paginate.Paginator}
Returns
A paginator object.
get_waiter(waiter_name)

Returns an object that can wait for some condition.

Parameters
waiter_name (str) -- The name of the waiter to get. See the waiters section of the service docs for a list of available waiters.
Returns
The specified waiter object.
Return type
botocore.waiter.Waiter
list_tags_for_resource(**kwargs)

Lists tags for an Amazon FSx file systems and backups in the case of Amazon FSx for Windows File Server.

When retrieving all tags, you can optionally specify the MaxResults parameter to limit the number of tags in a response. If more tags remain, Amazon FSx returns a NextToken value in the response. In this case, send a later request with the NextToken request parameter set to the value of NextToken from the last response.

This action is used in an iterative process to retrieve a list of your tags. ListTagsForResource is called first without a NextToken value. Then the action continues to be called with the NextToken parameter set to the value of the last NextToken value until a response has no NextToken .

When using this action, keep the following in mind:

  • The implementation might return fewer than MaxResults file system descriptions while still including a NextToken value.
  • The order of tags returned in the response of one ListTagsForResource call and the order of tags returned across the responses of a multi-call iteration is unspecified.

See also: AWS API Documentation

Request Syntax

response = client.list_tags_for_resource(
    ResourceARN='string',
    MaxResults=123,
    NextToken='string'
)
Parameters
  • ResourceARN (string) --

    [REQUIRED]

    The ARN of the Amazon FSx resource that will have its tags listed.

  • MaxResults (integer) -- (Optional) Maximum number of tags to return in the response (integer). This parameter value must be greater than 0. The number of items that Amazon FSx returns is the minimum of the MaxResults parameter specified in the request and the service's internal maximum number of items per page.
  • NextToken (string) -- (Optional) Opaque pagination token returned from a previous ListTagsForResource operation (String). If a token present, the action continues the list from where the returning call left off.
Return type

dict

Returns

Response Syntax

{
    'Tags': [
        {
            'Key': 'string',
            'Value': 'string'
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    The response object for ListTagsForResource operation.

    • Tags (list) --

      A list of tags on the resource.

      • (dict) --

        Specifies a key-value pair for a resource tag.

        • Key (string) --

          A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

        • Value (string) --

          A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

    • NextToken (string) --

      This is present if there are more tags than returned in the response (String). You can use the NextToken value in the later request to fetch the tags.

tag_resource(**kwargs)

Tags an Amazon FSx resource.

See also: AWS API Documentation

Request Syntax

response = client.tag_resource(
    ResourceARN='string',
    Tags=[
        {
            'Key': 'string',
            'Value': 'string'
        },
    ]
)
Parameters
  • ResourceARN (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the Amazon FSx resource that you want to tag.

  • Tags (list) --

    [REQUIRED]

    A list of tags for the resource. If a tag with a given key already exists, the value is replaced by the one specified in this parameter.

    • (dict) --

      Specifies a key-value pair for a resource tag.

      • Key (string) --

        A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

      • Value (string) --

        A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

Return type

dict

Returns

Response Syntax

{}

Response Structure

  • (dict) --

    The response object for the TagResource operation.

untag_resource(**kwargs)

This action removes a tag from an Amazon FSx resource.

See also: AWS API Documentation

Request Syntax

response = client.untag_resource(
    ResourceARN='string',
    TagKeys=[
        'string',
    ]
)
Parameters
  • ResourceARN (string) --

    [REQUIRED]

    The ARN of the Amazon FSx resource to untag.

  • TagKeys (list) --

    [REQUIRED]

    A list of keys of tags on the resource to untag. In case the tag key doesn't exist, the call will still succeed to be idempotent.

    • (string) --

      A string of 1 to 128 characters that specifies the key for a tag. Tag keys must be unique for the resource to which they are attached.

Return type

dict

Returns

Response Syntax

{}

Response Structure

  • (dict) --

    The response object for UntagResource action.

update_file_system(**kwargs)

Updates a file system configuration.

See also: AWS API Documentation

Request Syntax

response = client.update_file_system(
    FileSystemId='string',
    ClientRequestToken='string',
    WindowsConfiguration={
        'WeeklyMaintenanceStartTime': 'string',
        'DailyAutomaticBackupStartTime': 'string',
        'AutomaticBackupRetentionDays': 123
    },
    LustreConfiguration={
        'WeeklyMaintenanceStartTime': 'string'
    }
)
Parameters
  • FileSystemId (string) --

    [REQUIRED]

    The globally unique ID of the file system, assigned by Amazon FSx.

  • ClientRequestToken (string) --

    (Optional) A string of up to 64 ASCII characters that Amazon FSx uses to ensure idempotent updates. This string is automatically filled on your behalf when you use the AWS Command Line Interface (AWS CLI) or an AWS SDK.

    This field is autopopulated if not provided.

  • WindowsConfiguration (dict) --

    The configuration for this Microsoft Windows file system. The only supported options are for backup and maintenance.

    • WeeklyMaintenanceStartTime (string) --

      The preferred time to perform weekly maintenance, in the UTC time zone.

    • DailyAutomaticBackupStartTime (string) --

      The preferred time to take daily automatic backups, in the UTC time zone.

    • AutomaticBackupRetentionDays (integer) --

      The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 35 days.

  • LustreConfiguration (dict) --

    The configuration object for Amazon FSx for Lustre file systems used in the UpdateFileSystem operation.

    • WeeklyMaintenanceStartTime (string) --

      The preferred time to perform weekly maintenance, in the UTC time zone.

Return type

dict

Returns

Response Syntax

{
    'FileSystem': {
        'OwnerId': 'string',
        'CreationTime': datetime(2015, 1, 1),
        'FileSystemId': 'string',
        'FileSystemType': 'WINDOWS'|'LUSTRE',
        'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING',
        'FailureDetails': {
            'Message': 'string'
        },
        'StorageCapacity': 123,
        'VpcId': 'string',
        'SubnetIds': [
            'string',
        ],
        'NetworkInterfaceIds': [
            'string',
        ],
        'DNSName': 'string',
        'KmsKeyId': 'string',
        'ResourceARN': 'string',
        'Tags': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ],
        'WindowsConfiguration': {
            'ActiveDirectoryId': 'string',
            'ThroughputCapacity': 123,
            'MaintenanceOperationsInProgress': [
                'PATCHING'|'BACKING_UP',
            ],
            'WeeklyMaintenanceStartTime': 'string',
            'DailyAutomaticBackupStartTime': 'string',
            'AutomaticBackupRetentionDays': 123,
            'CopyTagsToBackups': True|False
        },
        'LustreConfiguration': {
            'WeeklyMaintenanceStartTime': 'string',
            'DataRepositoryConfiguration': {
                'ImportPath': 'string',
                'ExportPath': 'string',
                'ImportedFileChunkSize': 123
            }
        }
    }
}

Response Structure

  • (dict) --

    The response object for the UpdateFileSystem operation.

    • FileSystem (dict) --

      A description of the file system.

      • OwnerId (string) --

        The AWS account that created the file system. If the file system was created by an IAM user, the AWS account to which the IAM user belongs is the owner.

      • CreationTime (datetime) --

        The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.

      • FileSystemId (string) --

        The eight-digit ID of the file system that was automatically assigned by Amazon FSx.

      • FileSystemType (string) --

        Type of file system. Currently the only supported type is WINDOWS.

      • Lifecycle (string) --

        The lifecycle status of the file system.

      • FailureDetails (dict) --

        Structure providing details of any failures that occur when creating the file system has failed.

        • Message (string) --

          Message describing the failures that occurred during file system creation.

      • StorageCapacity (integer) --

        The storage capacity of the file system in gigabytes.

      • VpcId (string) --

        The ID of the primary VPC for the file system.

      • SubnetIds (list) --

        The IDs of the subnets to contain the endpoint for the file system. One and only one is supported. The file system is launched in the Availability Zone associated with this subnet.

        • (string) --

          The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

      • NetworkInterfaceIds (list) --

        The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.

        For an Amazon FSx for Windows File Server file system, you can have one network interface Id. For an Amazon FSx for Lustre file system, you can have more than one.

        • (string) --

          An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .

      • DNSName (string) --

        The DNS name for the file system.

      • KmsKeyId (string) --

        The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for an Amazon FSx for Windows File Server file system.

      • ResourceARN (string) --

        The resource ARN of the file system.

      • Tags (list) --

        The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .

        • (dict) --

          Specifies a key-value pair for a resource tag.

          • Key (string) --

            A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

          • Value (string) --

            A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

      • WindowsConfiguration (dict) --

        The configuration for this Microsoft Windows file system.

        • ActiveDirectoryId (string) --

          The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.

        • ThroughputCapacity (integer) --

          The throughput of an Amazon FSx file system, measured in megabytes per second.

        • MaintenanceOperationsInProgress (list) --

          The list of maintenance operations in progress for this file system.

          • (string) --

            An enumeration specifying the currently ongoing maintenance operation.

        • WeeklyMaintenanceStartTime (string) --

          The preferred time to perform weekly maintenance, in the UTC time zone.

        • DailyAutomaticBackupStartTime (string) --

          The preferred time to take daily automatic backups, in the UTC time zone.

        • AutomaticBackupRetentionDays (integer) --

          The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 35 days.

        • CopyTagsToBackups (boolean) --

          A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups.

      • LustreConfiguration (dict) --

        The configuration for the Amazon FSx for Lustre file system.

        • WeeklyMaintenanceStartTime (string) --

          The UTC time that you want to begin your weekly maintenance window.

        • DataRepositoryConfiguration (dict) --

          The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.

          • ImportPath (string) --

            The import path to the Amazon S3 bucket (and optional prefix) that you're using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.

          • ExportPath (string) --

            The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.

          • ImportedFileChunkSize (integer) --

            For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.

            The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.

Paginators

The available paginators are:

class FSx.Paginator.DescribeBackups
paginator = client.get_paginator('describe_backups')
paginate(**kwargs)

Creates an iterator that will paginate through responses from FSx.Client.describe_backups().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    BackupIds=[
        'string',
    ],
    Filters=[
        {
            'Name': 'file-system-id'|'backup-type',
            'Values': [
                'string',
            ]
        },
    ],
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • BackupIds (list) --

    (Optional) IDs of the backups you want to retrieve (String). This overrides any filters. If any IDs are not found, BackupNotFound will be thrown.

    • (string) --

      The ID of the backup.

  • Filters (list) --

    (Optional) Filters structure. Supported names are file-system-id and backup-type.

    • (dict) --

      A filter used to restrict the results of describe calls. You can use multiple filters to return results that meet all applied filter requirements.

      • Name (string) --

        The name for this filter.

      • Values (list) --

        The values of the filter. These are all the values for any of the applied filters.

        • (string) --

          The value for a filter.

  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'Backups': [
        {
            'BackupId': 'string',
            'Lifecycle': 'AVAILABLE'|'CREATING'|'DELETED'|'FAILED',
            'FailureDetails': {
                'Message': 'string'
            },
            'Type': 'AUTOMATIC'|'USER_INITIATED',
            'ProgressPercent': 123,
            'CreationTime': datetime(2015, 1, 1),
            'KmsKeyId': 'string',
            'ResourceARN': 'string',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ],
            'FileSystem': {
                'OwnerId': 'string',
                'CreationTime': datetime(2015, 1, 1),
                'FileSystemId': 'string',
                'FileSystemType': 'WINDOWS'|'LUSTRE',
                'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING',
                'FailureDetails': {
                    'Message': 'string'
                },
                'StorageCapacity': 123,
                'VpcId': 'string',
                'SubnetIds': [
                    'string',
                ],
                'NetworkInterfaceIds': [
                    'string',
                ],
                'DNSName': 'string',
                'KmsKeyId': 'string',
                'ResourceARN': 'string',
                'Tags': [
                    {
                        'Key': 'string',
                        'Value': 'string'
                    },
                ],
                'WindowsConfiguration': {
                    'ActiveDirectoryId': 'string',
                    'ThroughputCapacity': 123,
                    'MaintenanceOperationsInProgress': [
                        'PATCHING'|'BACKING_UP',
                    ],
                    'WeeklyMaintenanceStartTime': 'string',
                    'DailyAutomaticBackupStartTime': 'string',
                    'AutomaticBackupRetentionDays': 123,
                    'CopyTagsToBackups': True|False
                },
                'LustreConfiguration': {
                    'WeeklyMaintenanceStartTime': 'string',
                    'DataRepositoryConfiguration': {
                        'ImportPath': 'string',
                        'ExportPath': 'string',
                        'ImportedFileChunkSize': 123
                    }
                }
            }
        },
    ],

}

Response Structure

  • (dict) --

    Response object for DescribeBackups operation.

    • Backups (list) --

      Any array of backups.

      • (dict) --

        A backup of an Amazon FSx for Windows File Server file system. You can create a new file system from a backup to protect against data loss.

        • BackupId (string) --

          The ID of the backup.

        • Lifecycle (string) --

          The lifecycle status of the backup.

        • FailureDetails (dict) --

          Details explaining any failures that occur when creating a backup.

          • Message (string) --

            A message describing the backup creation failure.

        • Type (string) --

          The type of the backup.

        • ProgressPercent (integer) --

          The current percent of progress of an asynchronous task.

        • CreationTime (datetime) --

          The time when a particular backup was created.

        • KmsKeyId (string) --

          The ID of the AWS Key Management Service (AWS KMS) key used to encrypt this backup's data.

        • ResourceARN (string) --

          The Amazon Resource Name (ARN) for the backup resource.

        • Tags (list) --

          Tags associated with a particular file system.

          • (dict) --

            Specifies a key-value pair for a resource tag.

            • Key (string) --

              A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

            • Value (string) --

              A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

        • FileSystem (dict) --

          Metadata of the file system associated with the backup. This metadata is persisted even if the file system is deleted.

          • OwnerId (string) --

            The AWS account that created the file system. If the file system was created by an IAM user, the AWS account to which the IAM user belongs is the owner.

          • CreationTime (datetime) --

            The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.

          • FileSystemId (string) --

            The eight-digit ID of the file system that was automatically assigned by Amazon FSx.

          • FileSystemType (string) --

            Type of file system. Currently the only supported type is WINDOWS.

          • Lifecycle (string) --

            The lifecycle status of the file system.

          • FailureDetails (dict) --

            Structure providing details of any failures that occur when creating the file system has failed.

            • Message (string) --

              Message describing the failures that occurred during file system creation.

          • StorageCapacity (integer) --

            The storage capacity of the file system in gigabytes.

          • VpcId (string) --

            The ID of the primary VPC for the file system.

          • SubnetIds (list) --

            The IDs of the subnets to contain the endpoint for the file system. One and only one is supported. The file system is launched in the Availability Zone associated with this subnet.

            • (string) --

              The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

          • NetworkInterfaceIds (list) --

            The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.

            For an Amazon FSx for Windows File Server file system, you can have one network interface Id. For an Amazon FSx for Lustre file system, you can have more than one.

            • (string) --

              An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .

          • DNSName (string) --

            The DNS name for the file system.

          • KmsKeyId (string) --

            The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for an Amazon FSx for Windows File Server file system.

          • ResourceARN (string) --

            The resource ARN of the file system.

          • Tags (list) --

            The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .

            • (dict) --

              Specifies a key-value pair for a resource tag.

              • Key (string) --

                A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

              • Value (string) --

                A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

          • WindowsConfiguration (dict) --

            The configuration for this Microsoft Windows file system.

            • ActiveDirectoryId (string) --

              The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.

            • ThroughputCapacity (integer) --

              The throughput of an Amazon FSx file system, measured in megabytes per second.

            • MaintenanceOperationsInProgress (list) --

              The list of maintenance operations in progress for this file system.

              • (string) --

                An enumeration specifying the currently ongoing maintenance operation.

            • WeeklyMaintenanceStartTime (string) --

              The preferred time to perform weekly maintenance, in the UTC time zone.

            • DailyAutomaticBackupStartTime (string) --

              The preferred time to take daily automatic backups, in the UTC time zone.

            • AutomaticBackupRetentionDays (integer) --

              The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 35 days.

            • CopyTagsToBackups (boolean) --

              A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups.

          • LustreConfiguration (dict) --

            The configuration for the Amazon FSx for Lustre file system.

            • WeeklyMaintenanceStartTime (string) --

              The UTC time that you want to begin your weekly maintenance window.

            • DataRepositoryConfiguration (dict) --

              The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.

              • ImportPath (string) --

                The import path to the Amazon S3 bucket (and optional prefix) that you're using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.

              • ExportPath (string) --

                The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.

              • ImportedFileChunkSize (integer) --

                For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.

                The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.

class FSx.Paginator.DescribeFileSystems
paginator = client.get_paginator('describe_file_systems')
paginate(**kwargs)

Creates an iterator that will paginate through responses from FSx.Client.describe_file_systems().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    FileSystemIds=[
        'string',
    ],
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • FileSystemIds (list) --

    (Optional) IDs of the file systems whose descriptions you want to retrieve (String).

    • (string) --

      The globally unique ID of the file system, assigned by Amazon FSx.

  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'FileSystems': [
        {
            'OwnerId': 'string',
            'CreationTime': datetime(2015, 1, 1),
            'FileSystemId': 'string',
            'FileSystemType': 'WINDOWS'|'LUSTRE',
            'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING',
            'FailureDetails': {
                'Message': 'string'
            },
            'StorageCapacity': 123,
            'VpcId': 'string',
            'SubnetIds': [
                'string',
            ],
            'NetworkInterfaceIds': [
                'string',
            ],
            'DNSName': 'string',
            'KmsKeyId': 'string',
            'ResourceARN': 'string',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ],
            'WindowsConfiguration': {
                'ActiveDirectoryId': 'string',
                'ThroughputCapacity': 123,
                'MaintenanceOperationsInProgress': [
                    'PATCHING'|'BACKING_UP',
                ],
                'WeeklyMaintenanceStartTime': 'string',
                'DailyAutomaticBackupStartTime': 'string',
                'AutomaticBackupRetentionDays': 123,
                'CopyTagsToBackups': True|False
            },
            'LustreConfiguration': {
                'WeeklyMaintenanceStartTime': 'string',
                'DataRepositoryConfiguration': {
                    'ImportPath': 'string',
                    'ExportPath': 'string',
                    'ImportedFileChunkSize': 123
                }
            }
        },
    ],

}

Response Structure

  • (dict) --

    The response object for DescribeFileSystems operation.

    • FileSystems (list) --

      An array of file system descriptions.

      • (dict) --

        A description of a specific Amazon FSx file system.

        • OwnerId (string) --

          The AWS account that created the file system. If the file system was created by an IAM user, the AWS account to which the IAM user belongs is the owner.

        • CreationTime (datetime) --

          The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.

        • FileSystemId (string) --

          The eight-digit ID of the file system that was automatically assigned by Amazon FSx.

        • FileSystemType (string) --

          Type of file system. Currently the only supported type is WINDOWS.

        • Lifecycle (string) --

          The lifecycle status of the file system.

        • FailureDetails (dict) --

          Structure providing details of any failures that occur when creating the file system has failed.

          • Message (string) --

            Message describing the failures that occurred during file system creation.

        • StorageCapacity (integer) --

          The storage capacity of the file system in gigabytes.

        • VpcId (string) --

          The ID of the primary VPC for the file system.

        • SubnetIds (list) --

          The IDs of the subnets to contain the endpoint for the file system. One and only one is supported. The file system is launched in the Availability Zone associated with this subnet.

          • (string) --

            The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

        • NetworkInterfaceIds (list) --

          The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.

          For an Amazon FSx for Windows File Server file system, you can have one network interface Id. For an Amazon FSx for Lustre file system, you can have more than one.

          • (string) --

            An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .

        • DNSName (string) --

          The DNS name for the file system.

        • KmsKeyId (string) --

          The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for an Amazon FSx for Windows File Server file system.

        • ResourceARN (string) --

          The resource ARN of the file system.

        • Tags (list) --

          The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .

          • (dict) --

            Specifies a key-value pair for a resource tag.

            • Key (string) --

              A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

            • Value (string) --

              A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

        • WindowsConfiguration (dict) --

          The configuration for this Microsoft Windows file system.

          • ActiveDirectoryId (string) --

            The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.

          • ThroughputCapacity (integer) --

            The throughput of an Amazon FSx file system, measured in megabytes per second.

          • MaintenanceOperationsInProgress (list) --

            The list of maintenance operations in progress for this file system.

            • (string) --

              An enumeration specifying the currently ongoing maintenance operation.

          • WeeklyMaintenanceStartTime (string) --

            The preferred time to perform weekly maintenance, in the UTC time zone.

          • DailyAutomaticBackupStartTime (string) --

            The preferred time to take daily automatic backups, in the UTC time zone.

          • AutomaticBackupRetentionDays (integer) --

            The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 35 days.

          • CopyTagsToBackups (boolean) --

            A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups.

        • LustreConfiguration (dict) --

          The configuration for the Amazon FSx for Lustre file system.

          • WeeklyMaintenanceStartTime (string) --

            The UTC time that you want to begin your weekly maintenance window.

          • DataRepositoryConfiguration (dict) --

            The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.

            • ImportPath (string) --

              The import path to the Amazon S3 bucket (and optional prefix) that you're using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.

            • ExportPath (string) --

              The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.

            • ImportedFileChunkSize (integer) --

              For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.

              The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.

class FSx.Paginator.ListTagsForResource
paginator = client.get_paginator('list_tags_for_resource')
paginate(**kwargs)

Creates an iterator that will paginate through responses from FSx.Client.list_tags_for_resource().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    ResourceARN='string',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • ResourceARN (string) --

    [REQUIRED]

    The ARN of the Amazon FSx resource that will have its tags listed.

  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'Tags': [
        {
            'Key': 'string',
            'Value': 'string'
        },
    ],

}

Response Structure

  • (dict) --

    The response object for ListTagsForResource operation.

    • Tags (list) --

      A list of tags on the resource.

      • (dict) --

        Specifies a key-value pair for a resource tag.

        • Key (string) --

          A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.

        • Value (string) --

          A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .