S3 / Client / put_bucket_encryption

put_bucket_encryption#

S3.Client.put_bucket_encryption(**kwargs)#

This operation configures default encryption and Amazon S3 Bucket Keys for an existing bucket.

Note

Directory buckets - For directory buckets, you must make requests for this API operation to the Regional endpoint. These endpoints support path-style requests in the format ``https://s3express-control.region_code.amazonaws.com/bucket-name ``. Virtual-hosted-style requests aren’t supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.

By default, all buckets have a default encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3).

Note

General purpose buckets
- You can optionally configure default encryption for a bucket by using server-side encryption with Key Management Service (KMS) keys (SSE-KMS) or dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS). If you specify default encryption by using SSE-KMS, you can also configure Amazon S3 Bucket Keys. For information about the bucket default encryption feature, see Amazon S3 Bucket Default Encryption in the Amazon S3 User Guide.
- If you use PutBucketEncryption to set your default bucket encryption to SSE-KMS, you should verify that your KMS key ID is correct. Amazon S3 doesn’t validate the KMS key ID provided in PutBucketEncryption requests.
Directory buckets - You can optionally configure default encryption for a bucket by using server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
- We recommend that the bucket’s default encryption uses the desired encryption configuration and you don’t override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads.
- Your SSE-KMS configuration can only support 1 customer managed key per directory bucket for the lifetime of the bucket. The Amazon Web Services managed key ( aws/s3) isn’t supported.
- S3 Bucket Keys are always enabled for GET and PUT operations in a directory bucket and can’t be disabled. S3 Bucket Keys aren’t supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through CopyObject, UploadPartCopy, the Copy operation in Batch Operations, or the import jobs. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object.
- When you specify an KMS customer managed key for encryption in your directory bucket, only use the key ID or key ARN. The key alias format of the KMS key isn’t supported.
- For directory buckets, if you use PutBucketEncryption to set your default bucket encryption to SSE-KMS, Amazon S3 validates the KMS key ID provided in PutBucketEncryption requests.

Warning

If you’re specifying a customer managed KMS key, we recommend using a fully qualified KMS key ARN. If you use a KMS key alias instead, then KMS resolves the key within the requester’s account. This behavior can result in data that’s encrypted with a KMS key that belongs to the requester, and not the bucket owner.

Also, this action requires Amazon Web Services Signature Version 4. For more information, see Authenticating Requests (Amazon Web Services Signature Version 4).

Permissions

General purpose bucket permissions - The s3:PutEncryptionConfiguration permission is required in a policy. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.
Directory bucket permissions - To grant access to this API operation, you must have the s3express:PutEncryptionConfiguration permission in an IAM identity-based policy instead of a bucket policy. Cross-account access to this API operation isn’t supported. This operation can only be performed by the Amazon Web Services account that owns the resource. For more information about directory bucket policies and permissions, see Amazon Web Services Identity and Access Management (IAM) for S3 Express One Zone in the Amazon S3 User Guide. To set a directory bucket default encryption with SSE-KMS, you must also have the kms:GenerateDataKey and the kms:Decrypt permissions in IAM identity-based policies and KMS key policies for the target KMS key.

HTTP Host header syntax

Directory buckets - The HTTP Host header syntax is s3express-control.region.amazonaws.com.

The following operations are related to PutBucketEncryption:

Request Syntax

response = client.put_bucket_encryption(
    Bucket='string',
    ContentMD5='string',
    ChecksumAlgorithm='CRC32'|'CRC32C'|'SHA1'|'SHA256',
    ServerSideEncryptionConfiguration={
        'Rules': [
            {
                'ApplyServerSideEncryptionByDefault': {
                    'SSEAlgorithm': 'AES256'|'aws:kms'|'aws:kms:dsse',
                    'KMSMasterKeyID': 'string'
                },
                'BucketKeyEnabled': True|False
            },
        ]
    },
    ExpectedBucketOwner='string'
)

Parameters:

Bucket (string) –
[REQUIRED]

Specifies default encryption for a bucket using server-side encryption with different key options.

Directory buckets - When you use this operation with a directory bucket, you must use path-style requests in the format https://s3express-control.region_code.amazonaws.com/bucket-name ``. Virtual-hosted-style requests aren't supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must also follow the format ``bucket_base_name--az_id--x-s3 (for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide
ContentMD5 (string) –
The base64-encoded 128-bit MD5 digest of the server-side encryption configuration.

For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.

Note
This functionality is not supported for directory buckets.
ChecksumAlgorithm (string) –
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don’t use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

Note
For directory buckets, when you use Amazon Web Services SDKs, CRC32 is the default checksum algorithm that’s used for performance.
ServerSideEncryptionConfiguration (dict) –
[REQUIRED]

Specifies the default server-side-encryption configuration.
- Rules (list) – [REQUIRED]
  
  Container for information about a particular server-side encryption configuration rule.
  - (dict) –
    
    Specifies the default server-side encryption configuration.
    Note
    - General purpose buckets - If you’re specifying a customer managed KMS key, we recommend using a fully qualified KMS key ARN. If you use a KMS key alias instead, then KMS resolves the key within the requester’s account. This behavior can result in data that’s encrypted with a KMS key that belongs to the requester, and not the bucket owner.
    - Directory buckets - When you specify an KMS customer managed key for encryption in your directory bucket, only use the key ID or key ARN. The key alias format of the KMS key isn’t supported.
    - ApplyServerSideEncryptionByDefault (dict) –
      
      Specifies the default server-side encryption to apply to new objects in the bucket. If a PUT Object request doesn’t specify any server-side encryption, this default encryption will be applied.
      - SSEAlgorithm (string) – [REQUIRED]
        
        Server-side encryption algorithm to use for the default encryption.
        
        Note
        For directory buckets, there are only two supported values for server-side encryption: AES256 and aws:kms.
      - KMSMasterKeyID (string) –
        
        Amazon Web Services Key Management Service (KMS) customer managed key ID to use for the default encryption.
        
        Note
        
        General purpose buckets - This parameter is allowed if and only if SSEAlgorithm is set to aws:kms or aws:kms:dsse.
        
        Directory buckets - This parameter is allowed if and only if SSEAlgorithm is set to aws:kms.
        
        You can specify the key ID, key alias, or the Amazon Resource Name (ARN) of the KMS key.
        
        Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab
        
        Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab
        
        Key Alias: alias/alias-name
        
        If you are using encryption with cross-account or Amazon Web Services service operations, you must use a fully qualified KMS key ARN. For more information, see Using encryption for cross-account operations.
        
        Note
        
        General purpose buckets - If you’re specifying a customer managed KMS key, we recommend using a fully qualified KMS key ARN. If you use a KMS key alias instead, then KMS resolves the key within the requester’s account. This behavior can result in data that’s encrypted with a KMS key that belongs to the requester, and not the bucket owner. Also, if you use a key ID, you can run into a LogDestination undeliverable error when creating a VPC flow log.
        
        Directory buckets - When you specify an KMS customer managed key for encryption in your directory bucket, only use the key ID or key ARN. The key alias format of the KMS key isn’t supported.
        
        Warning
        Amazon S3 only supports symmetric encryption KMS keys. For more information, see Asymmetric keys in Amazon Web Services KMS in the Amazon Web Services Key Management Service Developer Guide.
    - BucketKeyEnabled (boolean) –
      
      Specifies whether Amazon S3 should use an S3 Bucket Key with server-side encryption using KMS (SSE-KMS) for new objects in the bucket. Existing objects are not affected. Setting the BucketKeyEnabled element to true causes Amazon S3 to use an S3 Bucket Key.
      Note
      
      General purpose buckets - By default, S3 Bucket Key is not enabled. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.
      
      Directory buckets - S3 Bucket Keys are always enabled for GET and PUT operations in a directory bucket and can’t be disabled. S3 Bucket Keys aren’t supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through CopyObject, UploadPartCopy, the Copy operation in Batch Operations, or the import jobs. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object.
ExpectedBucketOwner (string) –
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

Note
For directory buckets, this header is not supported in this API operation. If you specify this header, the request fails with the HTTP status code 501 Not Implemented.

Returns:

None

put_bucket_encryption#

Note

Note

General purpose buckets

Warning

Request Syntax

Note

Note

Note

Note

Note

Note

Warning

Note

Note