ECS / Client / describe_service_revisions

describe_service_revisions#

ECS.Client.describe_service_revisions(**kwargs)#

Describes one or more service revisions.

A service revision is a version of the service that includes the values for the Amazon ECS resources (for example, task definition) and the environment resources (for example, load balancers, subnets, and security groups). For more information, see Amazon ECS service revisions.

You can’t describe a service revision that was created before October 25, 2024.

See also: AWS API Documentation

Request Syntax
response = client.describe_service_revisions(
    serviceRevisionArns=[
        'string',
    ]
)
type serviceRevisionArns:

list

param serviceRevisionArns:

[REQUIRED]

The ARN of the service revision.

You can specify a maximum of 20 ARNs.

You can call ListServiceDeployments to get the ARNs.

(string) –

rtype:

dict

returns:
Response Syntax
{
    'serviceRevisions': [
        {
            'serviceRevisionArn': 'string',
            'serviceArn': 'string',
            'clusterArn': 'string',
            'taskDefinition': 'string',
            'capacityProviderStrategy': [
                {
                    'capacityProvider': 'string',
                    'weight': 123,
                    'base': 123
                },
            ],
            'launchType': 'EC2'|'FARGATE'|'EXTERNAL',
            'platformVersion': 'string',
            'platformFamily': 'string',
            'loadBalancers': [
                {
                    'targetGroupArn': 'string',
                    'loadBalancerName': 'string',
                    'containerName': 'string',
                    'containerPort': 123
                },
            ],
            'serviceRegistries': [
                {
                    'registryArn': 'string',
                    'port': 123,
                    'containerName': 'string',
                    'containerPort': 123
                },
            ],
            'networkConfiguration': {
                'awsvpcConfiguration': {
                    'subnets': [
                        'string',
                    ],
                    'securityGroups': [
                        'string',
                    ],
                    'assignPublicIp': 'ENABLED'|'DISABLED'
                }
            },
            'containerImages': [
                {
                    'containerName': 'string',
                    'imageDigest': 'string',
                    'image': 'string'
                },
            ],
            'guardDutyEnabled': True|False,
            'serviceConnectConfiguration': {
                'enabled': True|False,
                'namespace': 'string',
                'services': [
                    {
                        'portName': 'string',
                        'discoveryName': 'string',
                        'clientAliases': [
                            {
                                'port': 123,
                                'dnsName': 'string'
                            },
                        ],
                        'ingressPortOverride': 123,
                        'timeout': {
                            'idleTimeoutSeconds': 123,
                            'perRequestTimeoutSeconds': 123
                        },
                        'tls': {
                            'issuerCertificateAuthority': {
                                'awsPcaAuthorityArn': 'string'
                            },
                            'kmsKey': 'string',
                            'roleArn': 'string'
                        }
                    },
                ],
                'logConfiguration': {
                    'logDriver': 'json-file'|'syslog'|'journald'|'gelf'|'fluentd'|'awslogs'|'splunk'|'awsfirelens',
                    'options': {
                        'string': 'string'
                    },
                    'secretOptions': [
                        {
                            'name': 'string',
                            'valueFrom': 'string'
                        },
                    ]
                }
            },
            'volumeConfigurations': [
                {
                    'name': 'string',
                    'managedEBSVolume': {
                        'encrypted': True|False,
                        'kmsKeyId': 'string',
                        'volumeType': 'string',
                        'sizeInGiB': 123,
                        'snapshotId': 'string',
                        'iops': 123,
                        'throughput': 123,
                        'tagSpecifications': [
                            {
                                'resourceType': 'volume',
                                'tags': [
                                    {
                                        'key': 'string',
                                        'value': 'string'
                                    },
                                ],
                                'propagateTags': 'TASK_DEFINITION'|'SERVICE'|'NONE'
                            },
                        ],
                        'roleArn': 'string',
                        'filesystemType': 'ext3'|'ext4'|'xfs'|'ntfs'
                    }
                },
            ],
            'fargateEphemeralStorage': {
                'kmsKeyId': 'string'
            },
            'createdAt': datetime(2015, 1, 1),
            'vpcLatticeConfigurations': [
                {
                    'roleArn': 'string',
                    'targetGroupArn': 'string',
                    'portName': 'string'
                },
            ]
        },
    ],
    'failures': [
        {
            'arn': 'string',
            'reason': 'string',
            'detail': 'string'
        },
    ]
}
Response Structure

(dict) –

serviceRevisions (list) –

The list of service revisions described.

(dict) –

Information about the service revision.

A service revision contains a record of the workload configuration Amazon ECS is attempting to deploy. Whenever you create or deploy a service, Amazon ECS automatically creates and captures the configuration that you’re trying to deploy in the service revision. For information about service revisions, see Amazon ECS service revisions in the Amazon Elastic Container Service Developer Guide .

serviceRevisionArn (string) –

The ARN of the service revision.

serviceArn (string) –

The ARN of the service for the service revision.

clusterArn (string) –

The ARN of the cluster that hosts the service.

taskDefinition (string) –

The task definition the service revision uses.

capacityProviderStrategy (list) –

The capacity provider strategy the service revision uses.

(dict) –

The details of a capacity provider strategy. A capacity provider strategy can be set when using the RunTask <https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_RunTask.html>`__or `CreateCluster APIs or as the default capacity provider strategy for a cluster with the CreateCluster API.

Only capacity providers that are already associated with a cluster and have an ACTIVE or UPDATING status can be used in a capacity provider strategy. The PutClusterCapacityProviders API is used to associate a capacity provider with a cluster.

If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must already be created. New Auto Scaling group capacity providers can be created with the CreateClusterCapacityProvider API operation.

To use a Fargate capacity provider, specify either the FARGATE or FARGATE_SPOT capacity providers. The Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used in a capacity provider strategy.

With FARGATE_SPOT, you can run interruption tolerant tasks at a rate that’s discounted compared to the FARGATE price. FARGATE_SPOT runs tasks on spare compute capacity. When Amazon Web Services needs the capacity back, your tasks are interrupted with a two-minute warning. FARGATE_SPOT supports Linux tasks with the X86_64 architecture on platform version 1.3.0 or later. FARGATE_SPOT supports Linux tasks with the ARM64 architecture on platform version 1.4.0 or later.

A capacity provider strategy can contain a maximum of 20 capacity providers.

capacityProvider (string) –

The short name of the capacity provider.

weight (integer) –

The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The weight value is taken into consideration after the base value, if defined, is satisfied.

If no weight value is specified, the default value of 0 is used. When multiple capacity providers are specified within a capacity provider strategy, at least one of the capacity providers must have a weight value greater than zero and any capacity providers with a weight of 0 can’t be used to place tasks. If you specify multiple capacity providers in a strategy that all have a weight of 0, any RunTask or CreateService actions using the capacity provider strategy will fail.

An example scenario for using weights is defining a strategy that contains two capacity providers and both have a weight of 1, then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB, then for every one task that’s run using capacityProviderA, four tasks would use capacityProviderB.

base (integer) –

The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of 0 is used.

launchType (string) –

The launch type the service revision uses.

platformVersion (string) –

For the Fargate launch type, the platform version the service revision uses.

platformFamily (string) –

The platform family the service revision uses.

loadBalancers (list) –

The load balancers the service revision uses.

(dict) –

The load balancer configuration to use with a service or task set.

When you add, update, or remove a load balancer configuration, Amazon ECS starts a new deployment with the updated Elastic Load Balancing configuration. This causes tasks to register to and deregister from load balancers.

We recommend that you verify this on a test environment before you update the Elastic Load Balancing configuration.

A service-linked role is required for services that use multiple target groups. For more information, see Using service-linked roles in the Amazon Elastic Container Service Developer Guide.

targetGroupArn (string) –

The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.

A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer.

For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering multiple target groups with a service in the Amazon Elastic Container Service Developer Guide.

For services using the CODE_DEPLOY deployment controller, you’re required to define two target groups for the load balancer. For more information, see Blue/green deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide.

Warning
If your service’s task definition uses the awsvpc network mode, you must choose ip as the target type, not instance. Do this when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance. This network mode is required for the Fargate launch type.

loadBalancerName (string) –

The name of the load balancer to associate with the Amazon ECS service or task set.

If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.

containerName (string) –

The name of the container (as it appears in a container definition) to associate with the load balancer.

You need to specify the container name when configuring the target group for an Amazon ECS load balancer.

containerPort (integer) –

The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they’re launched on must allow ingress traffic on the hostPort of the port mapping.

serviceRegistries (list) –

The service registries (for Service Discovery) the service revision uses.

(dict) –

The details for the service registry.

Each service may be associated with one service registry. Multiple service registries for each service are not supported.

When you add, update, or remove the service registries configuration, Amazon ECS starts a new deployment. New tasks are registered and deregistered to the updated service registry configuration.

registryArn (string) –

The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is Cloud Map. For more information, see CreateService.

port (integer) –

The port value used if your service discovery service specified an SRV record. This field might be used if both the awsvpc network mode and SRV records are used.

containerName (string) –

The container name value to be used for your service discovery service. It’s already specified in the task definition. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can’t specify both.

containerPort (integer) –

The port value to be used for your service discovery service. It’s already specified in the task definition. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can’t specify both.

networkConfiguration (dict) –

The network configuration for a task or service.

awsvpcConfiguration (dict) –

The VPC subnets and security groups that are associated with a task.

Note
All specified subnets and security groups must be from the same VPC.

subnets (list) –

The IDs of the subnets associated with the task or service. There’s a limit of 16 subnets that can be specified per awsvpcConfiguration.

Note
All specified subnets must be from the same VPC.

(string) –

securityGroups (list) –

The IDs of the security groups associated with the task or service. If you don’t specify a security group, the default security group for the VPC is used. There’s a limit of 5 security groups that can be specified per awsvpcConfiguration.

Note
All specified security groups must be from the same VPC.

(string) –

assignPublicIp (string) –

Whether the task’s elastic network interface receives a public IP address. The default value is ENABLED.

containerImages (list) –

The container images the service revision uses.

(dict) –

The details about the container image a service revision uses.

To ensure that all tasks in a service use the same container image, Amazon ECS resolves container image names and any image tags specified in the task definition to container image digests.

After the container image digest has been established, Amazon ECS uses the digest to start any other desired tasks, and for any future service and service revision updates. This leads to all tasks in a service always running identical container images, resulting in version consistency for your software. For more information, see Container image resolution in the Amazon ECS Developer Guide.

containerName (string) –

The name of the container.

imageDigest (string) –

The container image digest.

image (string) –

The container image.

guardDutyEnabled (boolean) –

Indicates whether Runtime Monitoring is turned on.

serviceConnectConfiguration (dict) –

The Service Connect configuration of your Amazon ECS service. The configuration for this service to discover and connect to services, and be discovered by, and connected from, other services within a namespace.

Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

enabled (boolean) –

Specifies whether to use Service Connect with this service.

namespace (string) –

The namespace name or full Amazon Resource Name (ARN) of the Cloud Map namespace for use with Service Connect. The namespace must be in the same Amazon Web Services Region as the Amazon ECS service and cluster. The type of namespace doesn’t affect Service Connect. For more information about Cloud Map, see Working with Services in the Cloud Map Developer Guide.

services (list) –

The list of Service Connect service objects. These are names and aliases (also known as endpoints) that are used by other Amazon ECS services to connect to this service.

This field is not required for a “client” Amazon ECS service that’s a member of a namespace only to connect to other services within the namespace. An example of this would be a frontend application that accepts incoming requests from either a load balancer that’s attached to the service or by other means.

An object selects a port from the task definition, assigns a name for the Cloud Map service, and a list of aliases (endpoints) and ports for client applications to refer to this service.

(dict) –

The Service Connect service object configuration. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

portName (string) –

The portName must match the name of one of the portMappings from all the containers in the task definition of this Amazon ECS service.

discoveryName (string) –

The discoveryName is the name of the new Cloud Map service that Amazon ECS creates for this Amazon ECS service. This must be unique within the Cloud Map namespace. The name can contain up to 64 characters. The name can include lowercase letters, numbers, underscores (_), and hyphens (-). The name can’t start with a hyphen.

If the discoveryName isn’t specified, the port mapping name from the task definition is used in portName.namespace.

clientAliases (list) –

The list of client aliases for this Service Connect service. You use these to assign names that can be used by client applications. The maximum number of client aliases that you can have in this list is 1.

Each alias (“endpoint”) is a fully-qualified name and port number that other Amazon ECS tasks (“clients”) can use to connect to this service.

Each name and port mapping must be unique within the namespace.

For each ServiceConnectService, you must provide at least one clientAlias with one port.

(dict) –

Each alias (“endpoint”) is a fully-qualified name and port number that other tasks (“clients”) can use to connect to this service.

Each name and port mapping must be unique within the namespace.

Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

port (integer) –

The listening port number for the Service Connect proxy. This port is available inside of all of the tasks within the same namespace.

To avoid changing your applications in client Amazon ECS services, set this to the same port that the client application uses by default. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

dnsName (string) –

The dnsName is the name that you use in the applications of client tasks to connect to this service. The name must be a valid DNS name but doesn’t need to be fully-qualified. The name can include up to 127 characters. The name can include lowercase letters, numbers, underscores (_), hyphens (-), and periods (.). The name can’t start with a hyphen.

If this parameter isn’t specified, the default value of discoveryName.namespace is used. If the discoveryName isn’t specified, the port mapping name from the task definition is used in portName.namespace.

To avoid changing your applications in client Amazon ECS services, set this to the same name that the client application uses by default. For example, a few common names are database, db, or the lowercase name of a database, such as mysql or redis. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

ingressPortOverride (integer) –

The port number for the Service Connect proxy to listen on.

Use the value of this field to bypass the proxy for traffic on the port number specified in the named portMapping in the task definition of this application, and then use it in your VPC security groups to allow traffic into the proxy for this Amazon ECS service.

In awsvpc mode and Fargate, the default value is the container port number. The container port number is in the portMapping in the task definition. In bridge mode, the default value is the ephemeral port of the Service Connect proxy.

timeout (dict) –

A reference to an object that represents the configured timeouts for Service Connect.

idleTimeoutSeconds (integer) –

The amount of time in seconds a connection will stay active while idle. A value of 0 can be set to disable idleTimeout.

The idleTimeout default for HTTP/ HTTP2/ GRPC is 5 minutes.

The idleTimeout default for TCP is 1 hour.

perRequestTimeoutSeconds (integer) –

The amount of time waiting for the upstream to respond with a complete response per request. A value of 0 can be set to disable perRequestTimeout. perRequestTimeout can only be set if Service Connect appProtocol isn’t TCP. Only idleTimeout is allowed for TCP appProtocol.

tls (dict) –

A reference to an object that represents a Transport Layer Security (TLS) configuration.

issuerCertificateAuthority (dict) –

The signer certificate authority.

awsPcaAuthorityArn (string) –

The ARN of the Amazon Web Services Private Certificate Authority certificate.

kmsKey (string) –

The Amazon Web Services Key Management Service key.

roleArn (string) –

The Amazon Resource Name (ARN) of the IAM role that’s associated with the Service Connect TLS.

logConfiguration (dict) –

The log configuration for the container. This parameter maps to LogConfig in the docker container create command and the --log-driver option to docker run.

By default, containers use the same logging driver that the Docker daemon uses. However, the container might use a different logging driver than the Docker daemon by specifying a log driver configuration in the container definition.

Understand the following when specifying a log configuration for your containers.

Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon. Additional log drivers may be available in future releases of the Amazon ECS container agent. For tasks on Fargate, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, syslog, splunk, and awsfirelens.

This parameter requires version 1.18 of the Docker Remote API or greater on your container instance.

For tasks that are hosted on Amazon EC2 instances, the Amazon ECS container agent must register the available logging drivers with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS container agent configuration in the Amazon Elastic Container Service Developer Guide.

For tasks that are on Fargate, because you don’t have access to the underlying infrastructure your tasks are hosted on, any additional software needed must be installed outside of the task. For example, the Fluentd output aggregators or a remote host running Logstash to send Gelf logs to.

logDriver (string) –

The log driver to use for the container.

For tasks on Fargate, the supported log drivers are awslogs, splunk, and awsfirelens.

For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, syslog, splunk, and awsfirelens.

For more information about using the awslogs log driver, see Send Amazon ECS logs to CloudWatch in the Amazon Elastic Container Service Developer Guide.

For more information about using the awsfirelens log driver, see Send Amazon ECS logs to an Amazon Web Services service or Amazon Web Services Partner.

Note
If you have a custom driver that isn’t listed, you can fork the Amazon ECS container agent project that’s available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, we don’t currently provide support for running modified copies of this software.

options (dict) –

The configuration options to send to the log driver.

The options you can specify depend on the log driver. Some of the options you can specify when you use the awslogs log driver to route logs to Amazon CloudWatch include the following:

awslogs-create-group

Required: No

Specify whether you want the log group to be created automatically. If this option isn’t specified, it defaults to false.

Note
Your IAM policy must include the logs:CreateLogGroup permission before you attempt to use awslogs-create-group.

awslogs-region

Required: Yes

Specify the Amazon Web Services Region that the awslogs log driver is to send your Docker logs to. You can choose to send all of your logs from clusters in different Regions to a single region in CloudWatch Logs. This is so that they’re all visible in one location. Otherwise, you can separate them by Region for more granularity. Make sure that the specified log group exists in the Region that you specify with this option.

awslogs-group

Required: Yes

Make sure to specify a log group that the awslogs log driver sends its log streams to.

awslogs-stream-prefix

Required: Yes, when using the Fargate launch type.Optional for the EC2 launch type, required for the Fargate launch type.

Use the awslogs-stream-prefix option to associate a log stream with the specified prefix, the container name, and the ID of the Amazon ECS task that the container belongs to. If you specify a prefix with this option, then the log stream takes the format prefix-name/container-name/ecs-task-id.

If you don’t specify a prefix with this option, then the log stream is named after the container ID that’s assigned by the Docker daemon on the container instance. Because it’s difficult to trace logs back to the container that sent them with just the Docker container ID (which is only available on the container instance), we recommend that you specify a prefix with this option.

For Amazon ECS services, you can use the service name as the prefix. Doing so, you can trace log streams to the service that the container belongs to, the name of the container that sent them, and the ID of the task that the container belongs to.

You must specify a stream-prefix for your logs to have your logs appear in the Log pane when using the Amazon ECS console.

awslogs-datetime-format

Required: No

This option defines a multiline start pattern in Python strftime format. A log message consists of a line that matches the pattern and any following lines that don’t match the pattern. The matched line is the delimiter between log messages.

One example of a use case for using this format is for parsing output such as a stack dump, which might otherwise be logged in multiple entries. The correct pattern allows it to be captured in a single entry.

For more information, see awslogs-datetime-format.

You cannot configure both the awslogs-datetime-format and awslogs-multiline-pattern options.

Note
Multiline logging performs regular expression parsing and matching of all log messages. This might have a negative impact on logging performance.

awslogs-multiline-pattern

Required: No

This option defines a multiline start pattern that uses a regular expression. A log message consists of a line that matches the pattern and any following lines that don’t match the pattern. The matched line is the delimiter between log messages.

For more information, see awslogs-multiline-pattern.

This option is ignored if awslogs-datetime-format is also configured.

You cannot configure both the awslogs-datetime-format and awslogs-multiline-pattern options.

Note
Multiline logging performs regular expression parsing and matching of all log messages. This might have a negative impact on logging performance.

mode

Required: No

Valid values: non-blocking | blocking

This option defines the delivery mode of log messages from the container to CloudWatch Logs. The delivery mode you choose affects application availability when the flow of logs from container to CloudWatch is interrupted.

If you use the blocking mode and the flow of logs to CloudWatch is interrupted, calls from container code to write to the stdout and stderr streams will block. The logging thread of the application will block as a result. This may cause the application to become unresponsive and lead to container healthcheck failure.

If you use the non-blocking mode, the container’s logs are instead stored in an in-memory intermediate buffer configured with the max-buffer-size option. This prevents the application from becoming unresponsive when logs cannot be sent to CloudWatch. We recommend using this mode if you want to ensure service availability and are okay with some log loss. For more information, see Preventing log loss with non-blocking mode in the awslogs container log driver.

max-buffer-size

Required: No

Default value: 1m

When non-blocking mode is used, the max-buffer-size log option controls the size of the buffer that’s used for intermediate message storage. Make sure to specify an adequate buffer size based on your application. When the buffer fills up, further logs cannot be stored. Logs that cannot be stored are lost.

To route logs using the splunk log router, you need to specify a splunk-token and a splunk-url.

When you use the awsfirelens log router to route logs to an Amazon Web Services Service or Amazon Web Services Partner Network destination for log storage and analytics, you can set the log-driver-buffer-limit option to limit the number of events that are buffered in memory, before being sent to the log router container. It can help to resolve potential log loss issue because high throughput might result in memory running out for the buffer inside of Docker.

Other options you can specify when using awsfirelens to route logs depend on the destination. When you export logs to Amazon Data Firehose, you can specify the Amazon Web Services Region with region and a name for the log stream with delivery_stream.

When you export logs to Amazon Kinesis Data Streams, you can specify an Amazon Web Services Region with region and a data stream name with stream.

When you export logs to Amazon OpenSearch Service, you can specify options like Name, Host (OpenSearch Service endpoint without protocol), Port, Index, Type, Aws_auth, Aws_region, Suppress_Type_Name, and tls. For more information, see Under the hood: FireLens for Amazon ECS Tasks.

When you export logs to Amazon S3, you can specify the bucket using the bucket option. You can also specify region, total_file_size, upload_timeout, and use_put_object as options.

This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'

(string) –

(string) –

secretOptions (list) –

The secrets to pass to the log configuration. For more information, see Specifying sensitive data in the Amazon Elastic Container Service Developer Guide.

(dict) –

An object representing the secret to expose to your container. Secrets can be exposed to a container in the following ways:

To inject sensitive data into your containers as environment variables, use the secrets container definition parameter.

To reference sensitive information in the log configuration of a container, use the secretOptions container definition parameter.

For more information, see Specifying sensitive data in the Amazon Elastic Container Service Developer Guide.

name (string) –

The name of the secret.

valueFrom (string) –

The secret to expose to the container. The supported values are either the full ARN of the Secrets Manager secret or the full ARN of the parameter in the SSM Parameter Store.

For information about the require Identity and Access Management permissions, see Required IAM permissions for Amazon ECS secrets (for Secrets Manager) or Required IAM permissions for Amazon ECS secrets (for Systems Manager Parameter store) in the Amazon Elastic Container Service Developer Guide.

Note
If the SSM Parameter Store parameter exists in the same Region as the task you’re launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.

volumeConfigurations (list) –

The volumes that are configured at deployment that the service revision uses.

(dict) –

The configuration for a volume specified in the task definition as a volume that is configured at launch time. Currently, the only supported volume type is an Amazon EBS volume.

name (string) –

The name of the volume. This value must match the volume name from the Volume object in the task definition.

managedEBSVolume (dict) –

The configuration for the Amazon EBS volume that Amazon ECS creates and manages on your behalf. These settings are used to create each Amazon EBS volume, with one volume created for each task in the service. The Amazon EBS volumes are visible in your account in the Amazon EC2 console once they are created.

encrypted (boolean) –

Indicates whether the volume should be encrypted. If no value is specified, encryption is turned on by default. This parameter maps 1:1 with the Encrypted parameter of the CreateVolume API in the Amazon EC2 API Reference.

kmsKeyId (string) –

The Amazon Resource Name (ARN) identifier of the Amazon Web Services Key Management Service key to use for Amazon EBS encryption. When encryption is turned on and no Amazon Web Services Key Management Service key is specified, the default Amazon Web Services managed key for Amazon EBS volumes is used. This parameter maps 1:1 with the KmsKeyId parameter of the CreateVolume API in the Amazon EC2 API Reference.

Warning
Amazon Web Services authenticates the Amazon Web Services Key Management Service key asynchronously. Therefore, if you specify an ID, alias, or ARN that is invalid, the action can appear to complete, but eventually fails.

volumeType (string) –

The volume type. This parameter maps 1:1 with the VolumeType parameter of the CreateVolume API in the Amazon EC2 API Reference. For more information, see Amazon EBS volume types in the Amazon EC2 User Guide.

The following are the supported volume types.

General Purpose SSD: gp2``| ``gp3

Provisioned IOPS SSD: io1``| ``io2

Throughput Optimized HDD: st1

Cold HDD: sc1

Magnetic: standard

Note
The magnetic volume type is not supported on Fargate.

sizeInGiB (integer) –

The size of the volume in GiB. You must specify either a volume size or a snapshot ID. If you specify a snapshot ID, the snapshot size is used for the volume size by default. You can optionally specify a volume size greater than or equal to the snapshot size. This parameter maps 1:1 with the Size parameter of the CreateVolume API in the Amazon EC2 API Reference.

The following are the supported volume size values for each volume type.

gp2 and gp3: 1-16,384

io1 and io2: 4-16,384

st1 and sc1: 125-16,384

standard: 1-1,024

snapshotId (string) –

The snapshot that Amazon ECS uses to create the volume. You must specify either a snapshot ID or a volume size. This parameter maps 1:1 with the SnapshotId parameter of the CreateVolume API in the Amazon EC2 API Reference.

iops (integer) –

The number of I/O operations per second (IOPS). For gp3, io1, and io2 volumes, this represents the number of IOPS that are provisioned for the volume. For gp2 volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting.

The following are the supported values for each volume type.

gp3: 3,000 - 16,000 IOPS

io1: 100 - 64,000 IOPS

io2: 100 - 256,000 IOPS

This parameter is required for io1 and io2 volume types. The default for gp3 volumes is 3,000 IOPS. This parameter is not supported for st1, sc1, or standard volume types.

This parameter maps 1:1 with the Iops parameter of the CreateVolume API in the Amazon EC2 API Reference.

throughput (integer) –

The throughput to provision for a volume, in MiB/s, with a maximum of 1,000 MiB/s. This parameter maps 1:1 with the Throughput parameter of the CreateVolume API in the Amazon EC2 API Reference.

Warning
This parameter is only supported for the gp3 volume type.

tagSpecifications (list) –

The tags to apply to the volume. Amazon ECS applies service-managed tags by default. This parameter maps 1:1 with the TagSpecifications.N parameter of the CreateVolume API in the Amazon EC2 API Reference.

(dict) –

The tag specifications of an Amazon EBS volume.

resourceType (string) –

The type of volume resource.

tags (list) –

The tags applied to this Amazon EBS volume. AmazonECSCreated and AmazonECSManaged are reserved tags that can’t be used.

(dict) –

The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value. You define them.

The following basic restrictions apply to tags:

Maximum number of tags per resource - 50

For each resource, each tag key must be unique, and each tag key can have only one value.

Maximum key length - 128 Unicode characters in UTF-8

Maximum value length - 256 Unicode characters in UTF-8

If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

Tag keys and values are case-sensitive.

Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

key (string) –

One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.

value (string) –

The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).

propagateTags (string) –

Determines whether to propagate the tags from the task definition to the Amazon EBS volume. Tags can only propagate to a SERVICE specified in

ServiceVolumeConfiguration. If no value is specified, the tags aren’t propagated.

roleArn (string) –

The ARN of the IAM role to associate with this volume. This is the Amazon ECS infrastructure IAM role that is used to manage your Amazon Web Services infrastructure. We recommend using the Amazon ECS-managed AmazonECSInfrastructureRolePolicyForVolumes IAM policy with this role. For more information, see Amazon ECS infrastructure IAM role in the Amazon ECS Developer Guide.

filesystemType (string) –

The filesystem type for the volume. For volumes created from a snapshot, you must specify the same filesystem type that the volume was using when the snapshot was created. If there is a filesystem type mismatch, the task will fail to start.

The available Linux filesystem types are

ext3, ext4, and xfs. If no value is specified, the xfs filesystem type is used by default.

The available Windows filesystem types are NTFS.

fargateEphemeralStorage (dict) –

The amount of ephemeral storage to allocate for the deployment.

kmsKeyId (string) –

Specify an Key Management Service key ID to encrypt the ephemeral storage for deployment.

createdAt (datetime) –

The time that the service revision was created. The format is yyyy-mm-dd HH:mm:ss.SSSSS.

vpcLatticeConfigurations (list) –

The VPC Lattice configuration for the service revision.

(dict) –

The VPC Lattice configuration for your service that holds the information for the target group(s) Amazon ECS tasks will be registered to.

roleArn (string) –

The ARN of the IAM role to associate with this VPC Lattice configuration. This is the Amazon ECS infrastructure IAM role that is used to manage your VPC Lattice infrastructure.

targetGroupArn (string) –

The full Amazon Resource Name (ARN) of the target group or groups associated with the VPC Lattice configuration that the Amazon ECS tasks will be registered to.

portName (string) –

The name of the port mapping to register in the VPC Lattice target group. This is the name of the portMapping you defined in your task definition.

failures (list) –

Any failures associated with the call.

(dict) –

A failed resource. For a list of common causes, see API failure reasons in the Amazon Elastic Container Service Developer Guide.

arn (string) –

The Amazon Resource Name (ARN) of the failed resource.

reason (string) –

The reason for the failure.

detail (string) –

The details of the failure.

Exceptions

ECS.Client.exceptions.AccessDeniedException

ECS.Client.exceptions.ClientException

ECS.Client.exceptions.ClusterNotFoundException

ECS.Client.exceptions.InvalidParameterException

ECS.Client.exceptions.ServerException

ECS.Client.exceptions.ServiceNotFoundException

ECS.Client.exceptions.UnsupportedFeatureException