ECS / Client / describe_services

describe_services#

ECS.Client.describe_services(**kwargs)#

Describes the specified services running in your cluster.

See also: AWS API Documentation

Request Syntax

response = client.describe_services(
    cluster='string',
    services=[
        'string',
    ],
    include=[
        'TAGS',
    ]
)
type cluster:

string

param cluster:

The short name or full Amazon Resource Name (ARN)the cluster that hosts the service to describe. If you do not specify a cluster, the default cluster is assumed. This parameter is required if the service or services you are describing were launched in any cluster other than the default cluster.

type services:

list

param services:

[REQUIRED]

A list of services to describe. You may specify up to 10 services to describe in a single operation.

  • (string) –

type include:

list

param include:

Determines whether you want to see the resource tags for the service. If TAGS is specified, the tags are included in the response. If this field is omitted, tags aren’t included in the response.

  • (string) –

rtype:

dict

returns:

Response Syntax

{
    'services': [
        {
            'serviceArn': 'string',
            'serviceName': 'string',
            'clusterArn': 'string',
            'loadBalancers': [
                {
                    'targetGroupArn': 'string',
                    'loadBalancerName': 'string',
                    'containerName': 'string',
                    'containerPort': 123
                },
            ],
            'serviceRegistries': [
                {
                    'registryArn': 'string',
                    'port': 123,
                    'containerName': 'string',
                    'containerPort': 123
                },
            ],
            'status': 'string',
            'desiredCount': 123,
            'runningCount': 123,
            'pendingCount': 123,
            'launchType': 'EC2'|'FARGATE'|'EXTERNAL',
            'capacityProviderStrategy': [
                {
                    'capacityProvider': 'string',
                    'weight': 123,
                    'base': 123
                },
            ],
            'platformVersion': 'string',
            'platformFamily': 'string',
            'taskDefinition': 'string',
            'deploymentConfiguration': {
                'deploymentCircuitBreaker': {
                    'enable': True|False,
                    'rollback': True|False
                },
                'maximumPercent': 123,
                'minimumHealthyPercent': 123,
                'alarms': {
                    'alarmNames': [
                        'string',
                    ],
                    'enable': True|False,
                    'rollback': True|False
                }
            },
            'taskSets': [
                {
                    'id': 'string',
                    'taskSetArn': 'string',
                    'serviceArn': 'string',
                    'clusterArn': 'string',
                    'startedBy': 'string',
                    'externalId': 'string',
                    'status': 'string',
                    'taskDefinition': 'string',
                    'computedDesiredCount': 123,
                    'pendingCount': 123,
                    'runningCount': 123,
                    'createdAt': datetime(2015, 1, 1),
                    'updatedAt': datetime(2015, 1, 1),
                    'launchType': 'EC2'|'FARGATE'|'EXTERNAL',
                    'capacityProviderStrategy': [
                        {
                            'capacityProvider': 'string',
                            'weight': 123,
                            'base': 123
                        },
                    ],
                    'platformVersion': 'string',
                    'platformFamily': 'string',
                    'networkConfiguration': {
                        'awsvpcConfiguration': {
                            'subnets': [
                                'string',
                            ],
                            'securityGroups': [
                                'string',
                            ],
                            'assignPublicIp': 'ENABLED'|'DISABLED'
                        }
                    },
                    'loadBalancers': [
                        {
                            'targetGroupArn': 'string',
                            'loadBalancerName': 'string',
                            'containerName': 'string',
                            'containerPort': 123
                        },
                    ],
                    'serviceRegistries': [
                        {
                            'registryArn': 'string',
                            'port': 123,
                            'containerName': 'string',
                            'containerPort': 123
                        },
                    ],
                    'scale': {
                        'value': 123.0,
                        'unit': 'PERCENT'
                    },
                    'stabilityStatus': 'STEADY_STATE'|'STABILIZING',
                    'stabilityStatusAt': datetime(2015, 1, 1),
                    'tags': [
                        {
                            'key': 'string',
                            'value': 'string'
                        },
                    ]
                },
            ],
            'deployments': [
                {
                    'id': 'string',
                    'status': 'string',
                    'taskDefinition': 'string',
                    'desiredCount': 123,
                    'pendingCount': 123,
                    'runningCount': 123,
                    'failedTasks': 123,
                    'createdAt': datetime(2015, 1, 1),
                    'updatedAt': datetime(2015, 1, 1),
                    'capacityProviderStrategy': [
                        {
                            'capacityProvider': 'string',
                            'weight': 123,
                            'base': 123
                        },
                    ],
                    'launchType': 'EC2'|'FARGATE'|'EXTERNAL',
                    'platformVersion': 'string',
                    'platformFamily': 'string',
                    'networkConfiguration': {
                        'awsvpcConfiguration': {
                            'subnets': [
                                'string',
                            ],
                            'securityGroups': [
                                'string',
                            ],
                            'assignPublicIp': 'ENABLED'|'DISABLED'
                        }
                    },
                    'rolloutState': 'COMPLETED'|'FAILED'|'IN_PROGRESS',
                    'rolloutStateReason': 'string',
                    'serviceConnectConfiguration': {
                        'enabled': True|False,
                        'namespace': 'string',
                        'services': [
                            {
                                'portName': 'string',
                                'discoveryName': 'string',
                                'clientAliases': [
                                    {
                                        'port': 123,
                                        'dnsName': 'string'
                                    },
                                ],
                                'ingressPortOverride': 123,
                                'timeout': {
                                    'idleTimeoutSeconds': 123,
                                    'perRequestTimeoutSeconds': 123
                                },
                                'tls': {
                                    'issuerCertificateAuthority': {
                                        'awsPcaAuthorityArn': 'string'
                                    },
                                    'kmsKey': 'string',
                                    'roleArn': 'string'
                                }
                            },
                        ],
                        'logConfiguration': {
                            'logDriver': 'json-file'|'syslog'|'journald'|'gelf'|'fluentd'|'awslogs'|'splunk'|'awsfirelens',
                            'options': {
                                'string': 'string'
                            },
                            'secretOptions': [
                                {
                                    'name': 'string',
                                    'valueFrom': 'string'
                                },
                            ]
                        }
                    },
                    'serviceConnectResources': [
                        {
                            'discoveryName': 'string',
                            'discoveryArn': 'string'
                        },
                    ],
                    'volumeConfigurations': [
                        {
                            'name': 'string',
                            'managedEBSVolume': {
                                'encrypted': True|False,
                                'kmsKeyId': 'string',
                                'volumeType': 'string',
                                'sizeInGiB': 123,
                                'snapshotId': 'string',
                                'iops': 123,
                                'throughput': 123,
                                'tagSpecifications': [
                                    {
                                        'resourceType': 'volume',
                                        'tags': [
                                            {
                                                'key': 'string',
                                                'value': 'string'
                                            },
                                        ],
                                        'propagateTags': 'TASK_DEFINITION'|'SERVICE'|'NONE'
                                    },
                                ],
                                'roleArn': 'string',
                                'filesystemType': 'ext3'|'ext4'|'xfs'
                            }
                        },
                    ]
                },
            ],
            'roleArn': 'string',
            'events': [
                {
                    'id': 'string',
                    'createdAt': datetime(2015, 1, 1),
                    'message': 'string'
                },
            ],
            'createdAt': datetime(2015, 1, 1),
            'placementConstraints': [
                {
                    'type': 'distinctInstance'|'memberOf',
                    'expression': 'string'
                },
            ],
            'placementStrategy': [
                {
                    'type': 'random'|'spread'|'binpack',
                    'field': 'string'
                },
            ],
            'networkConfiguration': {
                'awsvpcConfiguration': {
                    'subnets': [
                        'string',
                    ],
                    'securityGroups': [
                        'string',
                    ],
                    'assignPublicIp': 'ENABLED'|'DISABLED'
                }
            },
            'healthCheckGracePeriodSeconds': 123,
            'schedulingStrategy': 'REPLICA'|'DAEMON',
            'deploymentController': {
                'type': 'ECS'|'CODE_DEPLOY'|'EXTERNAL'
            },
            'tags': [
                {
                    'key': 'string',
                    'value': 'string'
                },
            ],
            'createdBy': 'string',
            'enableECSManagedTags': True|False,
            'propagateTags': 'TASK_DEFINITION'|'SERVICE'|'NONE',
            'enableExecuteCommand': True|False
        },
    ],
    'failures': [
        {
            'arn': 'string',
            'reason': 'string',
            'detail': 'string'
        },
    ]
}

Response Structure

  • (dict) –

    • services (list) –

      The list of services described.

      • (dict) –

        Details on a service within a cluster.

        • serviceArn (string) –

          The ARN that identifies the service. For more information about the ARN format, see Amazon Resource Name (ARN) in the Amazon ECS Developer Guide.

        • serviceName (string) –

          The name of your service. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. Service names must be unique within a cluster. However, you can have similarly named services in multiple clusters within a Region or across multiple Regions.

        • clusterArn (string) –

          The Amazon Resource Name (ARN) of the cluster that hosts the service.

        • loadBalancers (list) –

          A list of Elastic Load Balancing load balancer objects. It contains the load balancer name, the container name, and the container port to access from the load balancer. The container name is as it appears in a container definition.

          • (dict) –

            The load balancer configuration to use with a service or task set.

            When you add, update, or remove a load balancer configuration, Amazon ECS starts a new deployment with the updated Elastic Load Balancing configuration. This causes tasks to register to and deregister from load balancers.

            We recommend that you verify this on a test environment before you update the Elastic Load Balancing configuration.

            A service-linked role is required for services that use multiple target groups. For more information, see Using service-linked roles in the Amazon Elastic Container Service Developer Guide.

            • targetGroupArn (string) –

              The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.

              A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer.

              For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering multiple target groups with a service in the Amazon Elastic Container Service Developer Guide.

              For services using the CODE_DEPLOY deployment controller, you’re required to define two target groups for the load balancer. For more information, see Blue/green deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide.

              Warning

              If your service’s task definition uses the awsvpc network mode, you must choose ip as the target type, not instance. Do this when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance. This network mode is required for the Fargate launch type.

            • loadBalancerName (string) –

              The name of the load balancer to associate with the Amazon ECS service or task set.

              If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.

            • containerName (string) –

              The name of the container (as it appears in a container definition) to associate with the load balancer.

              You need to specify the container name when configuring the target group for an Amazon ECS load balancer.

            • containerPort (integer) –

              The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they’re launched on must allow ingress traffic on the hostPort of the port mapping.

        • serviceRegistries (list) –

          The details for the service discovery registries to assign to this service. For more information, see Service Discovery.

          • (dict) –

            The details for the service registry.

            Each service may be associated with one service registry. Multiple service registries for each service are not supported.

            When you add, update, or remove the service registries configuration, Amazon ECS starts a new deployment. New tasks are registered and deregistered to the updated service registry configuration.

            • registryArn (string) –

              The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is Cloud Map. For more information, see CreateService.

            • port (integer) –

              The port value used if your service discovery service specified an SRV record. This field might be used if both the awsvpc network mode and SRV records are used.

            • containerName (string) –

              The container name value to be used for your service discovery service. It’s already specified in the task definition. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can’t specify both.

            • containerPort (integer) –

              The port value to be used for your service discovery service. It’s already specified in the task definition. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can’t specify both.

        • status (string) –

          The status of the service. The valid values are ACTIVE, DRAINING, or INACTIVE.

        • desiredCount (integer) –

          The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.

        • runningCount (integer) –

          The number of tasks in the cluster that are in the RUNNING state.

        • pendingCount (integer) –

          The number of tasks in the cluster that are in the PENDING state.

        • launchType (string) –

          The launch type the service is using. When using the DescribeServices API, this field is omitted if the service was created using a capacity provider strategy.

        • capacityProviderStrategy (list) –

          The capacity provider strategy the service uses. When using the DescribeServices API, this field is omitted if the service was created using a launch type.

          • (dict) –

            The details of a capacity provider strategy. A capacity provider strategy can be set when using the RunTask or CreateCluster APIs or as the default capacity provider strategy for a cluster with the CreateCluster API.

            Only capacity providers that are already associated with a cluster and have an ACTIVE or UPDATING status can be used in a capacity provider strategy. The PutClusterCapacityProviders API is used to associate a capacity provider with a cluster.

            If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must already be created. New Auto Scaling group capacity providers can be created with the CreateCapacityProvider API operation.

            To use a Fargate capacity provider, specify either the FARGATE or FARGATE_SPOT capacity providers. The Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used in a capacity provider strategy.

            A capacity provider strategy may contain a maximum of 6 capacity providers.

            • capacityProvider (string) –

              The short name of the capacity provider.

            • weight (integer) –

              The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The weight value is taken into consideration after the base value, if defined, is satisfied.

              If no weight value is specified, the default value of 0 is used. When multiple capacity providers are specified within a capacity provider strategy, at least one of the capacity providers must have a weight value greater than zero and any capacity providers with a weight of 0 can’t be used to place tasks. If you specify multiple capacity providers in a strategy that all have a weight of 0, any RunTask or CreateService actions using the capacity provider strategy will fail.

              An example scenario for using weights is defining a strategy that contains two capacity providers and both have a weight of 1, then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB, then for every one task that’s run using capacityProviderA, four tasks would use capacityProviderB.

            • base (integer) –

              The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of 0 is used.

        • platformVersion (string) –

          The platform version to run your service on. A platform version is only specified for tasks that are hosted on Fargate. If one isn’t specified, the LATEST platform version is used. For more information, see Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.

        • platformFamily (string) –

          The operating system that your tasks in the service run on. A platform family is specified only for tasks using the Fargate launch type.

          All tasks that run as part of this service must use the same platformFamily value as the service (for example, LINUX).

        • taskDefinition (string) –

          The task definition to use for tasks in the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.

        • deploymentConfiguration (dict) –

          Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.

          • deploymentCircuitBreaker (dict) –

            Note

            The deployment circuit breaker can only be used for services using the rolling update ( ECS) deployment type.

            The deployment circuit breaker determines whether a service deployment will fail if the service can’t reach a steady state. If you use the deployment circuit breaker, a service deployment will transition to a failed state and stop launching new tasks. If you use the rollback option, when a service deployment fails, the service is rolled back to the last deployment that completed successfully. For more information, see Rolling update in the Amazon Elastic Container Service Developer Guide

            • enable (boolean) –

              Determines whether to use the deployment circuit breaker logic for the service.

            • rollback (boolean) –

              Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is on, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.

          • maximumPercent (integer) –

            If a service is using the rolling update ( ECS) deployment type, the maximumPercent parameter represents an upper limit on the number of your service’s tasks that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desiredCount (rounded down to the nearest integer). This parameter enables you to define the deployment batch size. For example, if your service is using the REPLICA service scheduler and has a desiredCount of four tasks and a maximumPercent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default maximumPercent value for a service using the REPLICA service scheduler is 200%.

            If a service is using either the blue/green ( CODE_DEPLOY) or EXTERNAL deployment types and tasks that use the EC2 launch type, the maximum percent value is set to the default value and is used to define the upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.

          • minimumHealthyPercent (integer) –

            If a service is using the rolling update ( ECS) deployment type, the minimumHealthyPercent represents a lower limit on the number of your service’s tasks that must remain in the RUNNING state during a deployment, as a percentage of the desiredCount (rounded up to the nearest integer). This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desiredCount of four tasks and a minimumHealthyPercent of 50%, the service scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks.

            For services that do not use a load balancer, the following should be noted:

            • A service is considered healthy if all essential containers within the tasks in the service pass their health checks.

            • If a task has no essential containers with a health check defined, the service scheduler will wait for 40 seconds after a task reaches a RUNNING state before the task is counted towards the minimum healthy percent total.

            • If a task has one or more essential containers with a health check defined, the service scheduler will wait for the task to reach a healthy status before counting it towards the minimum healthy percent total. A task is considered healthy when all essential containers within the task have passed their health checks. The amount of time the service scheduler can wait for is determined by the container health check settings.

            For services that do use a load balancer, the following should be noted:

            • If a task has no essential containers with a health check defined, the service scheduler will wait for the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.

            • If a task has an essential container with a health check defined, the service scheduler will wait for both the task to reach a healthy status and the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.

            If a service is using either the blue/green ( CODE_DEPLOY) or EXTERNAL deployment types and is running tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value and is used to define the lower limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If a service is using either the blue/green ( CODE_DEPLOY) or EXTERNAL deployment types and is running tasks that use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.

          • alarms (dict) –

            Information about the CloudWatch alarms.

            • alarmNames (list) –

              One or more CloudWatch alarm names. Use a “,” to separate the alarms.

              • (string) –

            • enable (boolean) –

              Determines whether to use the CloudWatch alarm option in the service deployment process.

            • rollback (boolean) –

              Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is used, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.

        • taskSets (list) –

          Information about a set of Amazon ECS tasks in either an CodeDeploy or an EXTERNAL deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.

          • (dict) –

            Information about a set of Amazon ECS tasks in either an CodeDeploy or an EXTERNAL deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.

            • id (string) –

              The ID of the task set.

            • taskSetArn (string) –

              The Amazon Resource Name (ARN) of the task set.

            • serviceArn (string) –

              The Amazon Resource Name (ARN) of the service the task set exists in.

            • clusterArn (string) –

              The Amazon Resource Name (ARN) of the cluster that the service that hosts the task set exists in.

            • startedBy (string) –

              The tag specified when a task set is started. If an CodeDeploy deployment created the task set, the startedBy parameter is CODE_DEPLOY. If an external deployment created the task set, the startedBy field isn’t used.

            • externalId (string) –

              The external ID associated with the task set.

              If an CodeDeploy deployment created a task set, the externalId parameter contains the CodeDeploy deployment ID.

              If a task set is created for an external deployment and is associated with a service discovery registry, the externalId parameter contains the ECS_TASK_SET_EXTERNAL_ID Cloud Map attribute.

            • status (string) –

              The status of the task set. The following describes each state.

              PRIMARY

              The task set is serving production traffic.

              ACTIVE

              The task set isn’t serving production traffic.

              DRAINING

              The tasks in the task set are being stopped, and their corresponding targets are being deregistered from their target group.

            • taskDefinition (string) –

              The task definition that the task set is using.

            • computedDesiredCount (integer) –

              The computed desired count for the task set. This is calculated by multiplying the service’s desiredCount by the task set’s scale percentage. The result is always rounded up. For example, if the computed desired count is 1.2, it rounds up to 2 tasks.

            • pendingCount (integer) –

              The number of tasks in the task set that are in the PENDING status during a deployment. A task in the PENDING state is preparing to enter the RUNNING state. A task set enters the PENDING status when it launches for the first time or when it’s restarted after being in the STOPPED state.

            • runningCount (integer) –

              The number of tasks in the task set that are in the RUNNING status during a deployment. A task in the RUNNING state is running and ready for use.

            • createdAt (datetime) –

              The Unix timestamp for the time when the task set was created.

            • updatedAt (datetime) –

              The Unix timestamp for the time when the task set was last updated.

            • launchType (string) –

              The launch type the tasks in the task set are using. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.

            • capacityProviderStrategy (list) –

              The capacity provider strategy that are associated with the task set.

              • (dict) –

                The details of a capacity provider strategy. A capacity provider strategy can be set when using the RunTask or CreateCluster APIs or as the default capacity provider strategy for a cluster with the CreateCluster API.

                Only capacity providers that are already associated with a cluster and have an ACTIVE or UPDATING status can be used in a capacity provider strategy. The PutClusterCapacityProviders API is used to associate a capacity provider with a cluster.

                If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must already be created. New Auto Scaling group capacity providers can be created with the CreateCapacityProvider API operation.

                To use a Fargate capacity provider, specify either the FARGATE or FARGATE_SPOT capacity providers. The Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used in a capacity provider strategy.

                A capacity provider strategy may contain a maximum of 6 capacity providers.

                • capacityProvider (string) –

                  The short name of the capacity provider.

                • weight (integer) –

                  The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The weight value is taken into consideration after the base value, if defined, is satisfied.

                  If no weight value is specified, the default value of 0 is used. When multiple capacity providers are specified within a capacity provider strategy, at least one of the capacity providers must have a weight value greater than zero and any capacity providers with a weight of 0 can’t be used to place tasks. If you specify multiple capacity providers in a strategy that all have a weight of 0, any RunTask or CreateService actions using the capacity provider strategy will fail.

                  An example scenario for using weights is defining a strategy that contains two capacity providers and both have a weight of 1, then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB, then for every one task that’s run using capacityProviderA, four tasks would use capacityProviderB.

                • base (integer) –

                  The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of 0 is used.

            • platformVersion (string) –

              The Fargate platform version where the tasks in the task set are running. A platform version is only specified for tasks run on Fargate. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide.

            • platformFamily (string) –

              The operating system that your tasks in the set are running on. A platform family is specified only for tasks that use the Fargate launch type.

              All tasks in the set must have the same value.

            • networkConfiguration (dict) –

              The network configuration for the task set.

              • awsvpcConfiguration (dict) –

                The VPC subnets and security groups that are associated with a task.

                Note

                All specified subnets and security groups must be from the same VPC.

                • subnets (list) –

                  The IDs of the subnets associated with the task or service. There’s a limit of 16 subnets that can be specified per AwsVpcConfiguration.

                  Note

                  All specified subnets must be from the same VPC.

                  • (string) –

                • securityGroups (list) –

                  The IDs of the security groups associated with the task or service. If you don’t specify a security group, the default security group for the VPC is used. There’s a limit of 5 security groups that can be specified per AwsVpcConfiguration.

                  Note

                  All specified security groups must be from the same VPC.

                  • (string) –

                • assignPublicIp (string) –

                  Whether the task’s elastic network interface receives a public IP address. The default value is DISABLED.

            • loadBalancers (list) –

              Details on a load balancer that are used with a task set.

              • (dict) –

                The load balancer configuration to use with a service or task set.

                When you add, update, or remove a load balancer configuration, Amazon ECS starts a new deployment with the updated Elastic Load Balancing configuration. This causes tasks to register to and deregister from load balancers.

                We recommend that you verify this on a test environment before you update the Elastic Load Balancing configuration.

                A service-linked role is required for services that use multiple target groups. For more information, see Using service-linked roles in the Amazon Elastic Container Service Developer Guide.

                • targetGroupArn (string) –

                  The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.

                  A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer.

                  For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering multiple target groups with a service in the Amazon Elastic Container Service Developer Guide.

                  For services using the CODE_DEPLOY deployment controller, you’re required to define two target groups for the load balancer. For more information, see Blue/green deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide.

                  Warning

                  If your service’s task definition uses the awsvpc network mode, you must choose ip as the target type, not instance. Do this when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance. This network mode is required for the Fargate launch type.

                • loadBalancerName (string) –

                  The name of the load balancer to associate with the Amazon ECS service or task set.

                  If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.

                • containerName (string) –

                  The name of the container (as it appears in a container definition) to associate with the load balancer.

                  You need to specify the container name when configuring the target group for an Amazon ECS load balancer.

                • containerPort (integer) –

                  The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they’re launched on must allow ingress traffic on the hostPort of the port mapping.

            • serviceRegistries (list) –

              The details for the service discovery registries to assign to this task set. For more information, see Service discovery.

              • (dict) –

                The details for the service registry.

                Each service may be associated with one service registry. Multiple service registries for each service are not supported.

                When you add, update, or remove the service registries configuration, Amazon ECS starts a new deployment. New tasks are registered and deregistered to the updated service registry configuration.

                • registryArn (string) –

                  The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is Cloud Map. For more information, see CreateService.

                • port (integer) –

                  The port value used if your service discovery service specified an SRV record. This field might be used if both the awsvpc network mode and SRV records are used.

                • containerName (string) –

                  The container name value to be used for your service discovery service. It’s already specified in the task definition. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can’t specify both.

                • containerPort (integer) –

                  The port value to be used for your service discovery service. It’s already specified in the task definition. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value. However, you can’t specify both.

            • scale (dict) –

              A floating-point percentage of your desired number of tasks to place and keep running in the task set.

              • value (float) –

                The value, specified as a percent total of a service’s desiredCount, to scale the task set. Accepted values are numbers between 0 and 100.

              • unit (string) –

                The unit of measure for the scale value.

            • stabilityStatus (string) –

              The stability status. This indicates whether the task set has reached a steady state. If the following conditions are met, the task set are in STEADY_STATE:

              • The task runningCount is equal to the computedDesiredCount.

              • The pendingCount is 0.

              • There are no tasks that are running on container instances in the DRAINING status.

              • All tasks are reporting a healthy status from the load balancers, service discovery, and container health checks.

              If any of those conditions aren’t met, the stability status returns STABILIZING.

            • stabilityStatusAt (datetime) –

              The Unix timestamp for the time when the task set stability status was retrieved.

            • tags (list) –

              The metadata that you apply to the task set to help you categorize and organize them. Each tag consists of a key and an optional value. You define both.

              The following basic restrictions apply to tags:

              • Maximum number of tags per resource - 50

              • For each resource, each tag key must be unique, and each tag key can have only one value.

              • Maximum key length - 128 Unicode characters in UTF-8

              • Maximum value length - 256 Unicode characters in UTF-8

              • If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

              • Tag keys and values are case-sensitive.

              • Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

              • (dict) –

                The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value. You define them.

                The following basic restrictions apply to tags:

                • Maximum number of tags per resource - 50

                • For each resource, each tag key must be unique, and each tag key can have only one value.

                • Maximum key length - 128 Unicode characters in UTF-8

                • Maximum value length - 256 Unicode characters in UTF-8

                • If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

                • Tag keys and values are case-sensitive.

                • Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

                • key (string) –

                  One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.

                • value (string) –

                  The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).

        • deployments (list) –

          The current state of deployments for the service.

          • (dict) –

            The details of an Amazon ECS service deployment. This is used only when a service uses the ECS deployment controller type.

            • id (string) –

              The ID of the deployment.

            • status (string) –

              The status of the deployment. The following describes each state.

              PRIMARY

              The most recent deployment of a service.

              ACTIVE

              A service deployment that still has running tasks, but are in the process of being replaced with a new PRIMARY deployment.

              INACTIVE

              A deployment that has been completely replaced.

            • taskDefinition (string) –

              The most recent task definition that was specified for the tasks in the service to use.

            • desiredCount (integer) –

              The most recent desired count of tasks that was specified for the service to deploy or maintain.

            • pendingCount (integer) –

              The number of tasks in the deployment that are in the PENDING status.

            • runningCount (integer) –

              The number of tasks in the deployment that are in the RUNNING status.

            • failedTasks (integer) –

              The number of consecutively failed tasks in the deployment. A task is considered a failure if the service scheduler can’t launch the task, the task doesn’t transition to a RUNNING state, or if it fails any of its defined health checks and is stopped.

              Note

              Once a service deployment has one or more successfully running tasks, the failed task count resets to zero and stops being evaluated.

            • createdAt (datetime) –

              The Unix timestamp for the time when the service deployment was created.

            • updatedAt (datetime) –

              The Unix timestamp for the time when the service deployment was last updated.

            • capacityProviderStrategy (list) –

              The capacity provider strategy that the deployment is using.

              • (dict) –

                The details of a capacity provider strategy. A capacity provider strategy can be set when using the RunTask or CreateCluster APIs or as the default capacity provider strategy for a cluster with the CreateCluster API.

                Only capacity providers that are already associated with a cluster and have an ACTIVE or UPDATING status can be used in a capacity provider strategy. The PutClusterCapacityProviders API is used to associate a capacity provider with a cluster.

                If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must already be created. New Auto Scaling group capacity providers can be created with the CreateCapacityProvider API operation.

                To use a Fargate capacity provider, specify either the FARGATE or FARGATE_SPOT capacity providers. The Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used in a capacity provider strategy.

                A capacity provider strategy may contain a maximum of 6 capacity providers.

                • capacityProvider (string) –

                  The short name of the capacity provider.

                • weight (integer) –

                  The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The weight value is taken into consideration after the base value, if defined, is satisfied.

                  If no weight value is specified, the default value of 0 is used. When multiple capacity providers are specified within a capacity provider strategy, at least one of the capacity providers must have a weight value greater than zero and any capacity providers with a weight of 0 can’t be used to place tasks. If you specify multiple capacity providers in a strategy that all have a weight of 0, any RunTask or CreateService actions using the capacity provider strategy will fail.

                  An example scenario for using weights is defining a strategy that contains two capacity providers and both have a weight of 1, then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB, then for every one task that’s run using capacityProviderA, four tasks would use capacityProviderB.

                • base (integer) –

                  The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of 0 is used.

            • launchType (string) –

              The launch type the tasks in the service are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.

            • platformVersion (string) –

              The platform version that your tasks in the service run on. A platform version is only specified for tasks using the Fargate launch type. If one isn’t specified, the LATEST platform version is used. For more information, see Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.

            • platformFamily (string) –

              The operating system that your tasks in the service, or tasks are running on. A platform family is specified only for tasks using the Fargate launch type.

              All tasks that run as part of this service must use the same platformFamily value as the service, for example, LINUX..

            • networkConfiguration (dict) –

              The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.

              • awsvpcConfiguration (dict) –

                The VPC subnets and security groups that are associated with a task.

                Note

                All specified subnets and security groups must be from the same VPC.

                • subnets (list) –

                  The IDs of the subnets associated with the task or service. There’s a limit of 16 subnets that can be specified per AwsVpcConfiguration.

                  Note

                  All specified subnets must be from the same VPC.

                  • (string) –

                • securityGroups (list) –

                  The IDs of the security groups associated with the task or service. If you don’t specify a security group, the default security group for the VPC is used. There’s a limit of 5 security groups that can be specified per AwsVpcConfiguration.

                  Note

                  All specified security groups must be from the same VPC.

                  • (string) –

                • assignPublicIp (string) –

                  Whether the task’s elastic network interface receives a public IP address. The default value is DISABLED.

            • rolloutState (string) –

              Note

              The rolloutState of a service is only returned for services that use the rolling update ( ECS) deployment type that aren’t behind a Classic Load Balancer.

              The rollout state of the deployment. When a service deployment is started, it begins in an IN_PROGRESS state. When the service reaches a steady state, the deployment transitions to a COMPLETED state. If the service fails to reach a steady state and circuit breaker is turned on, the deployment transitions to a FAILED state. A deployment in FAILED state doesn’t launch any new tasks. For more information, see DeploymentCircuitBreaker.

            • rolloutStateReason (string) –

              A description of the rollout state of a deployment.

            • serviceConnectConfiguration (dict) –

              The details of the Service Connect configuration that’s used by this deployment. Compare the configuration between multiple deployments when troubleshooting issues with new deployments.

              The configuration for this service to discover and connect to services, and be discovered by, and connected from, other services within a namespace.

              Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

              • enabled (boolean) –

                Specifies whether to use Service Connect with this service.

              • namespace (string) –

                The namespace name or full Amazon Resource Name (ARN) of the Cloud Map namespace for use with Service Connect. The namespace must be in the same Amazon Web Services Region as the Amazon ECS service and cluster. The type of namespace doesn’t affect Service Connect. For more information about Cloud Map, see Working with Services in the Cloud Map Developer Guide.

              • services (list) –

                The list of Service Connect service objects. These are names and aliases (also known as endpoints) that are used by other Amazon ECS services to connect to this service.

                This field is not required for a “client” Amazon ECS service that’s a member of a namespace only to connect to other services within the namespace. An example of this would be a frontend application that accepts incoming requests from either a load balancer that’s attached to the service or by other means.

                An object selects a port from the task definition, assigns a name for the Cloud Map service, and a list of aliases (endpoints) and ports for client applications to refer to this service.

                • (dict) –

                  The Service Connect service object configuration. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

                  • portName (string) –

                    The portName must match the name of one of the portMappings from all the containers in the task definition of this Amazon ECS service.

                  • discoveryName (string) –

                    The discoveryName is the name of the new Cloud Map service that Amazon ECS creates for this Amazon ECS service. This must be unique within the Cloud Map namespace. The name can contain up to 64 characters. The name can include lowercase letters, numbers, underscores (_), and hyphens (-). The name can’t start with a hyphen.

                    If the discoveryName isn’t specified, the port mapping name from the task definition is used in portName.namespace.

                  • clientAliases (list) –

                    The list of client aliases for this Service Connect service. You use these to assign names that can be used by client applications. The maximum number of client aliases that you can have in this list is 1.

                    Each alias (“endpoint”) is a fully-qualified name and port number that other Amazon ECS tasks (“clients”) can use to connect to this service.

                    Each name and port mapping must be unique within the namespace.

                    For each ServiceConnectService, you must provide at least one clientAlias with one port.

                    • (dict) –

                      Each alias (“endpoint”) is a fully-qualified name and port number that other tasks (“clients”) can use to connect to this service.

                      Each name and port mapping must be unique within the namespace.

                      Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

                      • port (integer) –

                        The listening port number for the Service Connect proxy. This port is available inside of all of the tasks within the same namespace.

                        To avoid changing your applications in client Amazon ECS services, set this to the same port that the client application uses by default. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

                      • dnsName (string) –

                        The dnsName is the name that you use in the applications of client tasks to connect to this service. The name must be a valid DNS name but doesn’t need to be fully-qualified. The name can include up to 127 characters. The name can include lowercase letters, numbers, underscores (_), hyphens (-), and periods (.). The name can’t start with a hyphen.

                        If this parameter isn’t specified, the default value of discoveryName.namespace is used. If the discoveryName isn’t specified, the port mapping name from the task definition is used in portName.namespace.

                        To avoid changing your applications in client Amazon ECS services, set this to the same name that the client application uses by default. For example, a few common names are database, db, or the lowercase name of a database, such as mysql or redis. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

                  • ingressPortOverride (integer) –

                    The port number for the Service Connect proxy to listen on.

                    Use the value of this field to bypass the proxy for traffic on the port number specified in the named portMapping in the task definition of this application, and then use it in your VPC security groups to allow traffic into the proxy for this Amazon ECS service.

                    In awsvpc mode and Fargate, the default value is the container port number. The container port number is in the portMapping in the task definition. In bridge mode, the default value is the ephemeral port of the Service Connect proxy.

                  • timeout (dict) –

                    A reference to an object that represents the configured timeouts for Service Connect.

                    • idleTimeoutSeconds (integer) –

                      The amount of time in seconds a connection will stay active while idle. A value of 0 can be set to disable idleTimeout.

                      The idleTimeout default for HTTP/ HTTP2/ GRPC is 5 minutes.

                      The idleTimeout default for TCP is 1 hour.

                    • perRequestTimeoutSeconds (integer) –

                      The amount of time waiting for the upstream to respond with a complete response per request. A value of 0 can be set to disable perRequestTimeout. perRequestTimeout can only be set if Service Connect appProtocol isn’t TCP. Only idleTimeout is allowed for TCP appProtocol.

                  • tls (dict) –

                    A reference to an object that represents a Transport Layer Security (TLS) configuration.

                    • issuerCertificateAuthority (dict) –

                      The signer certificate authority.

                      • awsPcaAuthorityArn (string) –

                        The ARN of the Amazon Web Services Private Certificate Authority certificate.

                    • kmsKey (string) –

                      The Amazon Web Services Key Management Service key.

                    • roleArn (string) –

                      The Amazon Resource Name (ARN) of the IAM role that’s associated with the Service Connect TLS.

              • logConfiguration (dict) –

                The log configuration for the container. This parameter maps to LogConfig in the Create a container section of the Docker Remote API and the --log-driver option to docker run.

                By default, containers use the same logging driver that the Docker daemon uses. However, the container might use a different logging driver than the Docker daemon by specifying a log driver configuration in the container definition. For more information about the options for different supported log drivers, see Configure logging drivers in the Docker documentation.

                Understand the following when specifying a log configuration for your containers.

                • Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon. Additional log drivers may be available in future releases of the Amazon ECS container agent. For tasks on Fargate, the supported log drivers are awslogs, splunk, and awsfirelens. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries, syslog, splunk, and awsfirelens.

                • This parameter requires version 1.18 of the Docker Remote API or greater on your container instance.

                • For tasks that are hosted on Amazon EC2 instances, the Amazon ECS container agent must register the available logging drivers with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS container agent configuration in the Amazon Elastic Container Service Developer Guide.

                • For tasks that are on Fargate, because you don’t have access to the underlying infrastructure your tasks are hosted on, any additional software needed must be installed outside of the task. For example, the Fluentd output aggregators or a remote host running Logstash to send Gelf logs to.

                • logDriver (string) –

                  The log driver to use for the container.

                  For tasks on Fargate, the supported log drivers are awslogs, splunk, and awsfirelens.

                  For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs, fluentd, gelf, json-file, journald, logentries, syslog, splunk, and awsfirelens.

                  For more information about using the awslogs log driver, see Using the awslogs log driver in the Amazon Elastic Container Service Developer Guide.

                  For more information about using the awsfirelens log driver, see Custom log routing in the Amazon Elastic Container Service Developer Guide.

                  Note

                  If you have a custom driver that isn’t listed, you can fork the Amazon ECS container agent project that’s available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, we don’t currently provide support for running modified copies of this software.

                • options (dict) –

                  The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'

                  • (string) –

                    • (string) –

                • secretOptions (list) –

                  The secrets to pass to the log configuration. For more information, see Specifying sensitive data in the Amazon Elastic Container Service Developer Guide.

                  • (dict) –

                    An object representing the secret to expose to your container. Secrets can be exposed to a container in the following ways:

                    • To inject sensitive data into your containers as environment variables, use the secrets container definition parameter.

                    • To reference sensitive information in the log configuration of a container, use the secretOptions container definition parameter.

                    For more information, see Specifying sensitive data in the Amazon Elastic Container Service Developer Guide.

                    • name (string) –

                      The name of the secret.

                    • valueFrom (string) –

                      The secret to expose to the container. The supported values are either the full ARN of the Secrets Manager secret or the full ARN of the parameter in the SSM Parameter Store.

                      For information about the require Identity and Access Management permissions, see Required IAM permissions for Amazon ECS secrets (for Secrets Manager) or Required IAM permissions for Amazon ECS secrets (for Systems Manager Parameter store) in the Amazon Elastic Container Service Developer Guide.

                      Note

                      If the SSM Parameter Store parameter exists in the same Region as the task you’re launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.

            • serviceConnectResources (list) –

              The list of Service Connect resources that are associated with this deployment. Each list entry maps a discovery name to a Cloud Map service name.

              • (dict) –

                The Service Connect resource. Each configuration maps a discovery name to a Cloud Map service name. The data is stored in Cloud Map as part of the Service Connect configuration for each discovery name of this Amazon ECS service.

                A task can resolve the dnsName for each of the clientAliases of a service. However a task can’t resolve the discovery names. If you want to connect to a service, refer to the ServiceConnectConfiguration of that service for the list of clientAliases that you can use.

                • discoveryName (string) –

                  The discovery name of this Service Connect resource.

                  The discoveryName is the name of the new Cloud Map service that Amazon ECS creates for this Amazon ECS service. This must be unique within the Cloud Map namespace. The name can contain up to 64 characters. The name can include lowercase letters, numbers, underscores (_), and hyphens (-). The name can’t start with a hyphen.

                  If the discoveryName isn’t specified, the port mapping name from the task definition is used in portName.namespace.

                • discoveryArn (string) –

                  The Amazon Resource Name (ARN) for the namespace in Cloud Map that matches the discovery name for this Service Connect resource. You can use this ARN in other integrations with Cloud Map. However, Service Connect can’t ensure connectivity outside of Amazon ECS.

            • volumeConfigurations (list) –

              The details of the volume that was configuredAtLaunch. You can configure different settings like the size, throughput, volumeType, and ecryption in ServiceManagedEBSVolumeConfiguration. The name of the volume must match the name from the task definition.

              • (dict) –

                The configuration for a volume specified in the task definition as a volume that is configured at launch time. Currently, the only supported volume type is an Amazon EBS volume.

                • name (string) –

                  The name of the volume. This value must match the volume name from the Volume object in the task definition.

                • managedEBSVolume (dict) –

                  The configuration for the Amazon EBS volume that Amazon ECS creates and manages on your behalf. These settings are used to create each Amazon EBS volume, with one volume created for each task in the service. The Amazon EBS volumes are visible in your account in the Amazon EC2 console once they are created.

                  • encrypted (boolean) –

                    Indicates whether the volume should be encrypted. If no value is specified, encryption is turned on by default. This parameter maps 1:1 with the Encrypted parameter of the CreateVolume API in the Amazon EC2 API Reference.

                  • kmsKeyId (string) –

                    The Amazon Resource Name (ARN) identifier of the Amazon Web Services Key Management Service key to use for Amazon EBS encryption. When encryption is turned on and no Amazon Web Services Key Management Service key is specified, the default Amazon Web Services managed key for Amazon EBS volumes is used. This parameter maps 1:1 with the KmsKeyId parameter of the CreateVolume API in the Amazon EC2 API Reference.

                    Warning

                    Amazon Web Services authenticates the Amazon Web Services Key Management Service key asynchronously. Therefore, if you specify an ID, alias, or ARN that is invalid, the action can appear to complete, but eventually fails.

                  • volumeType (string) –

                    The volume type. This parameter maps 1:1 with the VolumeType parameter of the CreateVolume API in the Amazon EC2 API Reference. For more information, see Amazon EBS volume types in the Amazon EC2 User Guide.

                    The following are the supported volume types.

                    • General Purpose SSD: gp2``| ``gp3

                    • Provisioned IOPS SSD: io1``| ``io2

                    • Throughput Optimized HDD: st1

                    • Cold HDD: sc1

                    • Magnetic: standard

                    Note

                    The magnetic volume type is not supported on Fargate.

                  • sizeInGiB (integer) –

                    The size of the volume in GiB. You must specify either a volume size or a snapshot ID. If you specify a snapshot ID, the snapshot size is used for the volume size by default. You can optionally specify a volume size greater than or equal to the snapshot size. This parameter maps 1:1 with the Size parameter of the CreateVolume API in the Amazon EC2 API Reference.

                    The following are the supported volume size values for each volume type.

                    • gp2 and gp3: 1-16,384

                    • io1 and io2: 4-16,384

                    • st1 and sc1: 125-16,384

                    • standard: 1-1,024

                  • snapshotId (string) –

                    The snapshot that Amazon ECS uses to create the volume. You must specify either a snapshot ID or a volume size. This parameter maps 1:1 with the SnapshotId parameter of the CreateVolume API in the Amazon EC2 API Reference.

                  • iops (integer) –

                    The number of I/O operations per second (IOPS). For gp3, io1, and io2 volumes, this represents the number of IOPS that are provisioned for the volume. For gp2 volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting.

                    The following are the supported values for each volume type.

                    • gp3: 3,000 - 16,000 IOPS

                    • io1: 100 - 64,000 IOPS

                    • io2: 100 - 256,000 IOPS

                    This parameter is required for io1 and io2 volume types. The default for gp3 volumes is 3,000 IOPS. This parameter is not supported for st1, sc1, or standard volume types.

                    This parameter maps 1:1 with the Iops parameter of the CreateVolume API in the Amazon EC2 API Reference.

                  • throughput (integer) –

                    The throughput to provision for a volume, in MiB/s, with a maximum of 1,000 MiB/s. This parameter maps 1:1 with the Throughput parameter of the CreateVolume API in the Amazon EC2 API Reference.

                    Warning

                    This parameter is only supported for the gp3 volume type.

                  • tagSpecifications (list) –

                    The tags to apply to the volume. Amazon ECS applies service-managed tags by default. This parameter maps 1:1 with the TagSpecifications.N parameter of the CreateVolume API in the Amazon EC2 API Reference.

                    • (dict) –

                      The tag specifications of an Amazon EBS volume.

                      • resourceType (string) –

                        The type of volume resource.

                      • tags (list) –

                        The tags applied to this Amazon EBS volume. AmazonECSCreated and AmazonECSManaged are reserved tags that can’t be used.

                        • (dict) –

                          The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value. You define them.

                          The following basic restrictions apply to tags:

                          • Maximum number of tags per resource - 50

                          • For each resource, each tag key must be unique, and each tag key can have only one value.

                          • Maximum key length - 128 Unicode characters in UTF-8

                          • Maximum value length - 256 Unicode characters in UTF-8

                          • If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

                          • Tag keys and values are case-sensitive.

                          • Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

                          • key (string) –

                            One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.

                          • value (string) –

                            The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).

                      • propagateTags (string) –

                        Determines whether to propagate the tags from the task definition to the Amazon EBS volume. Tags can only propagate to a SERVICE specified in

ServiceVolumeConfiguration. If no value is specified, the tags aren’t propagated.

  • roleArn (string) –

    The ARN of the IAM role to associate with this volume. This is the Amazon ECS infrastructure IAM role that is used to manage your Amazon Web Services infrastructure. We recommend using the Amazon ECS-managed AmazonECSInfrastructureRolePolicyForVolumes IAM policy with this role. For more information, see Amazon ECS infrastructure IAM role in the Amazon ECS Developer Guide.

  • filesystemType (string) –

    The Linux filesystem type for the volume. For volumes created from a snapshot, you must specify the same filesystem type that the volume was using when the snapshot was created. If there is a filesystem type mismatch, the task will fail to start.

    The available filesystem types are

ext3, ext4, and xfs. If no value is specified, the xfs filesystem type is used by default.

  • roleArn (string) –

    The ARN of the IAM role that’s associated with the service. It allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.

  • events (list) –

    The event stream for your service. A maximum of 100 of the latest events are displayed.

    • (dict) –

      The details for an event that’s associated with a service.

      • id (string) –

        The ID string for the event.

      • createdAt (datetime) –

        The Unix timestamp for the time when the event was triggered.

      • message (string) –

        The event message.

  • createdAt (datetime) –

    The Unix timestamp for the time when the service was created.

  • placementConstraints (list) –

    The placement constraints for the tasks in the service.

    • (dict) –

      An object representing a constraint on task placement. For more information, see Task placement constraints in the Amazon Elastic Container Service Developer Guide.

      Note

      If you’re using the Fargate launch type, task placement constraints aren’t supported.

      • type (string) –

        The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.

      • expression (string) –

        A cluster query language expression to apply to the constraint. The expression can have a maximum length of 2000 characters. You can’t specify an expression if the constraint type is distinctInstance. For more information, see Cluster query language in the Amazon Elastic Container Service Developer Guide.

  • placementStrategy (list) –

    The placement strategy that determines how tasks for the service are placed.

    • (dict) –

      The task placement strategy for a task or service. For more information, see Task placement strategies in the Amazon Elastic Container Service Developer Guide.

      • type (string) –

        The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that’s specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory but still enough to run the task.

      • field (string) –

        The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that’s applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are cpu and memory. For the random placement strategy, this field is not used.

  • networkConfiguration (dict) –

    The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.

    • awsvpcConfiguration (dict) –

      The VPC subnets and security groups that are associated with a task.

      Note

      All specified subnets and security groups must be from the same VPC.

      • subnets (list) –

        The IDs of the subnets associated with the task or service. There’s a limit of 16 subnets that can be specified per AwsVpcConfiguration.

        Note

        All specified subnets must be from the same VPC.

        • (string) –

      • securityGroups (list) –

        The IDs of the security groups associated with the task or service. If you don’t specify a security group, the default security group for the VPC is used. There’s a limit of 5 security groups that can be specified per AwsVpcConfiguration.

        Note

        All specified security groups must be from the same VPC.

        • (string) –

      • assignPublicIp (string) –

        Whether the task’s elastic network interface receives a public IP address. The default value is DISABLED.

  • healthCheckGracePeriodSeconds (integer) –

    The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.

  • schedulingStrategy (string) –

    The scheduling strategy to use for the service. For more information, see Services.

    There are two service scheduler strategies available.

    • REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions.

    • DAEMON-The daemon scheduling strategy deploys exactly one task on each active container instance. This task meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks. It stop tasks that don’t meet the placement constraints.

    Note

    Fargate tasks don’t support the DAEMON scheduling strategy.

  • deploymentController (dict) –

    The deployment controller type the service is using.

    • type (string) –

      The deployment controller type to use.

      There are three deployment controller types available:

      ECS

      The rolling update ( ECS) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration.

      CODE_DEPLOY

      The blue/green ( CODE_DEPLOY) deployment type uses the blue/green deployment model powered by CodeDeploy, which allows you to verify a new deployment of a service before sending production traffic to it.

      EXTERNAL

      The external ( EXTERNAL) deployment type enables you to use any third-party deployment controller for full control over the deployment process for an Amazon ECS service.

  • tags (list) –

    The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value. You define bot the key and value.

    The following basic restrictions apply to tags:

    • Maximum number of tags per resource - 50

    • For each resource, each tag key must be unique, and each tag key can have only one value.

    • Maximum key length - 128 Unicode characters in UTF-8

    • Maximum value length - 256 Unicode characters in UTF-8

    • If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

    • Tag keys and values are case-sensitive.

    • Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

    • (dict) –

      The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value. You define them.

      The following basic restrictions apply to tags:

      • Maximum number of tags per resource - 50

      • For each resource, each tag key must be unique, and each tag key can have only one value.

      • Maximum key length - 128 Unicode characters in UTF-8

      • Maximum value length - 256 Unicode characters in UTF-8

      • If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

      • Tag keys and values are case-sensitive.

      • Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

      • key (string) –

        One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.

      • value (string) –

        The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).

  • createdBy (string) –

    The principal that created the service.

  • enableECSManagedTags (boolean) –

    Determines whether to use Amazon ECS managed tags for the tasks in the service. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.

  • propagateTags (string) –

    Determines whether to propagate the tags from the task definition or the service to the task. If no value is specified, the tags aren’t propagated.

  • enableExecuteCommand (boolean) –

    Determines whether the execute command functionality is turned on for the service. If true, the execute command functionality is turned on for all containers in tasks as part of the service.

  • failures (list) –

    Any failures associated with the call.

    • (dict) –

      A failed resource. For a list of common causes, see API failure reasons in the Amazon Elastic Container Service Developer Guide.

      • arn (string) –

        The Amazon Resource Name (ARN) of the failed resource.

      • reason (string) –

        The reason for the failure.

      • detail (string) –

        The details of the failure.

Exceptions

Examples

This example provides descriptive information about the service named ecs-simple-service.

response = client.describe_services(
    services=[
        'ecs-simple-service',
    ],
)

print(response)

Expected Output:

{
    'failures': [
    ],
    'services': [
        {
            'clusterArn': 'arn:aws:ecs:us-east-1:012345678910:cluster/default',
            'createdAt': datetime(2016, 8, 29, 16, 25, 52, 0, 242, 0),
            'deploymentConfiguration': {
                'maximumPercent': 200,
                'minimumHealthyPercent': 100,
            },
            'deployments': [
                {
                    'createdAt': datetime(2016, 8, 29, 16, 25, 52, 0, 242, 0),
                    'desiredCount': 1,
                    'id': 'ecs-svc/9223370564341623665',
                    'pendingCount': 0,
                    'runningCount': 0,
                    'status': 'PRIMARY',
                    'taskDefinition': 'arn:aws:ecs:us-east-1:012345678910:task-definition/hello_world:6',
                    'updatedAt': datetime(2016, 8, 29, 16, 25, 52, 0, 242, 0),
                },
            ],
            'desiredCount': 1,
            'events': [
                {
                    'createdAt': datetime(2016, 8, 29, 16, 25, 58, 0, 242, 0),
                    'id': '38c285e5-d335-4b68-8b15-e46dedc8e88d',
                    # In this example, there is a service event that shows unavailable cluster resources.
                    'message': '(service ecs-simple-service) was unable to place a task because no container instance met all of its requirements. The closest matching (container-instance 3f4de1c5-ffdd-4954-af7e-75b4be0c8841) is already using a port required by your task. For more information, see the Troubleshooting section of the Amazon ECS Developer Guide.',
                },
            ],
            'loadBalancers': [
            ],
            'pendingCount': 0,
            'runningCount': 0,
            'serviceArn': 'arn:aws:ecs:us-east-1:012345678910:service/ecs-simple-service',
            'serviceName': 'ecs-simple-service',
            'status': 'ACTIVE',
            'taskDefinition': 'arn:aws:ecs:us-east-1:012345678910:task-definition/hello_world:6',
        },
    ],
    'ResponseMetadata': {
        '...': '...',
    },
}