IoTFleetWise / Client / update_decoder_manifest

update_decoder_manifest#

IoTFleetWise.Client.update_decoder_manifest(**kwargs)#

Updates a decoder manifest.

A decoder manifest can only be updated when the status is DRAFT. Only ACTIVE decoder manifests can be associated with vehicles.

See also: AWS API Documentation

Request Syntax

response = client.update_decoder_manifest(
    name='string',
    description='string',
    signalDecodersToAdd=[
        {
            'fullyQualifiedName': 'string',
            'type': 'CAN_SIGNAL'|'OBD_SIGNAL'|'MESSAGE_SIGNAL'|'CUSTOM_DECODING_SIGNAL',
            'interfaceId': 'string',
            'canSignal': {
                'messageId': 123,
                'isBigEndian': True|False,
                'isSigned': True|False,
                'startBit': 123,
                'offset': 123.0,
                'factor': 123.0,
                'length': 123,
                'name': 'string'
            },
            'obdSignal': {
                'pidResponseLength': 123,
                'serviceMode': 123,
                'pid': 123,
                'scaling': 123.0,
                'offset': 123.0,
                'startByte': 123,
                'byteLength': 123,
                'bitRightShift': 123,
                'bitMaskLength': 123
            },
            'messageSignal': {
                'topicName': 'string',
                'structuredMessage': {
                    'primitiveMessageDefinition': {
                        'ros2PrimitiveMessageDefinition': {
                            'primitiveType': 'BOOL'|'BYTE'|'CHAR'|'FLOAT32'|'FLOAT64'|'INT8'|'UINT8'|'INT16'|'UINT16'|'INT32'|'UINT32'|'INT64'|'UINT64'|'STRING'|'WSTRING',
                            'offset': 123.0,
                            'scaling': 123.0,
                            'upperBound': 123
                        }
                    },
                    'structuredMessageListDefinition': {
                        'name': 'string',
                        'memberType': {'... recursive ...'},
                        'listType': 'FIXED_CAPACITY'|'DYNAMIC_UNBOUNDED_CAPACITY'|'DYNAMIC_BOUNDED_CAPACITY',
                        'capacity': 123
                    },
                    'structuredMessageDefinition': [
                        {
                            'fieldName': 'string',
                            'dataType': {'... recursive ...'}
                        },
                    ]
                }
            },
            'customDecodingSignal': {
                'id': 'string'
            }
        },
    ],
    signalDecodersToUpdate=[
        {
            'fullyQualifiedName': 'string',
            'type': 'CAN_SIGNAL'|'OBD_SIGNAL'|'MESSAGE_SIGNAL'|'CUSTOM_DECODING_SIGNAL',
            'interfaceId': 'string',
            'canSignal': {
                'messageId': 123,
                'isBigEndian': True|False,
                'isSigned': True|False,
                'startBit': 123,
                'offset': 123.0,
                'factor': 123.0,
                'length': 123,
                'name': 'string'
            },
            'obdSignal': {
                'pidResponseLength': 123,
                'serviceMode': 123,
                'pid': 123,
                'scaling': 123.0,
                'offset': 123.0,
                'startByte': 123,
                'byteLength': 123,
                'bitRightShift': 123,
                'bitMaskLength': 123
            },
            'messageSignal': {
                'topicName': 'string',
                'structuredMessage': {
                    'primitiveMessageDefinition': {
                        'ros2PrimitiveMessageDefinition': {
                            'primitiveType': 'BOOL'|'BYTE'|'CHAR'|'FLOAT32'|'FLOAT64'|'INT8'|'UINT8'|'INT16'|'UINT16'|'INT32'|'UINT32'|'INT64'|'UINT64'|'STRING'|'WSTRING',
                            'offset': 123.0,
                            'scaling': 123.0,
                            'upperBound': 123
                        }
                    },
                    'structuredMessageListDefinition': {
                        'name': 'string',
                        'memberType': {'... recursive ...'},
                        'listType': 'FIXED_CAPACITY'|'DYNAMIC_UNBOUNDED_CAPACITY'|'DYNAMIC_BOUNDED_CAPACITY',
                        'capacity': 123
                    },
                    'structuredMessageDefinition': [
                        {
                            'fieldName': 'string',
                            'dataType': {'... recursive ...'}
                        },
                    ]
                }
            },
            'customDecodingSignal': {
                'id': 'string'
            }
        },
    ],
    signalDecodersToRemove=[
        'string',
    ],
    networkInterfacesToAdd=[
        {
            'interfaceId': 'string',
            'type': 'CAN_INTERFACE'|'OBD_INTERFACE'|'VEHICLE_MIDDLEWARE'|'CUSTOM_DECODING_INTERFACE',
            'canInterface': {
                'name': 'string',
                'protocolName': 'string',
                'protocolVersion': 'string'
            },
            'obdInterface': {
                'name': 'string',
                'requestMessageId': 123,
                'obdStandard': 'string',
                'pidRequestIntervalSeconds': 123,
                'dtcRequestIntervalSeconds': 123,
                'useExtendedIds': True|False,
                'hasTransmissionEcu': True|False
            },
            'vehicleMiddleware': {
                'name': 'string',
                'protocolName': 'ROS_2'
            },
            'customDecodingInterface': {
                'name': 'string'
            }
        },
    ],
    networkInterfacesToUpdate=[
        {
            'interfaceId': 'string',
            'type': 'CAN_INTERFACE'|'OBD_INTERFACE'|'VEHICLE_MIDDLEWARE'|'CUSTOM_DECODING_INTERFACE',
            'canInterface': {
                'name': 'string',
                'protocolName': 'string',
                'protocolVersion': 'string'
            },
            'obdInterface': {
                'name': 'string',
                'requestMessageId': 123,
                'obdStandard': 'string',
                'pidRequestIntervalSeconds': 123,
                'dtcRequestIntervalSeconds': 123,
                'useExtendedIds': True|False,
                'hasTransmissionEcu': True|False
            },
            'vehicleMiddleware': {
                'name': 'string',
                'protocolName': 'ROS_2'
            },
            'customDecodingInterface': {
                'name': 'string'
            }
        },
    ],
    networkInterfacesToRemove=[
        'string',
    ],
    status='ACTIVE'|'DRAFT'|'INVALID'|'VALIDATING',
    defaultForUnmappedSignals='CUSTOM_DECODING'
)
Parameters:

  • name (string) –

    [REQUIRED]

    The name of the decoder manifest to update.

  • description (string) – A brief description of the decoder manifest to update.

  • signalDecodersToAdd (list) –

    A list of information about decoding additional signals to add to the decoder manifest.

    • (dict) –

      Information about a signal decoder.

      • fullyQualifiedName (string) – [REQUIRED]

        The fully qualified name of a signal decoder as defined in a vehicle model.

      • type (string) – [REQUIRED]

        The network protocol for the vehicle. For example, CAN_SIGNAL specifies a protocol that defines how data is communicated between electronic control units (ECUs). OBD_SIGNAL specifies a protocol that defines how self-diagnostic data is communicated between ECUs.

      • interfaceId (string) – [REQUIRED]

        The ID of a network interface that specifies what network protocol a vehicle follows.

      • canSignal (dict) –

        Information about signal decoder using the Controller Area Network (CAN) protocol.

        • messageId (integer) – [REQUIRED]

          The ID of the message.

        • isBigEndian (boolean) – [REQUIRED]

          Whether the byte ordering of a CAN message is big-endian.

        • isSigned (boolean) – [REQUIRED]

          Whether the message data is specified as a signed value.

        • startBit (integer) – [REQUIRED]

          Indicates the beginning of the CAN signal. This should always be the least significant bit (LSB).

          This value might be different from the value in a DBC file. For little endian signals, startBit is the same value as in the DBC file. For big endian signals in a DBC file, the start bit is the most significant bit (MSB). You will have to calculate the LSB instead and pass it as the startBit.

        • offset (float) – [REQUIRED]

          The offset used to calculate the signal value. Combined with factor, the calculation is value = raw_value * factor + offset.

        • factor (float) – [REQUIRED]

          A multiplier used to decode the CAN message.

        • length (integer) – [REQUIRED]

          How many bytes of data are in the message.

        • name (string) –

          The name of the signal.

      • obdSignal (dict) –

        Information about signal decoder using the on-board diagnostic (OBD) II protocol.

        • pidResponseLength (integer) – [REQUIRED]

          The length of the requested data.

        • serviceMode (integer) – [REQUIRED]

          The mode of operation (diagnostic service) in a message.

        • pid (integer) – [REQUIRED]

          The diagnostic code used to request data from a vehicle for this signal.

        • scaling (float) – [REQUIRED]

          A multiplier used to decode the message.

        • offset (float) – [REQUIRED]

          The offset used to calculate the signal value. Combined with scaling, the calculation is value = raw_value * scaling + offset.

        • startByte (integer) – [REQUIRED]

          Indicates the beginning of the message.

        • byteLength (integer) – [REQUIRED]

          The length of a message.

        • bitRightShift (integer) –

          The number of positions to shift bits in the message.

        • bitMaskLength (integer) –

          The number of bits to mask in a message.

      • messageSignal (dict) –

        The decoding information for a specific message which supports higher order data types.

        • topicName (string) – [REQUIRED]

          The topic name for the message signal. It corresponds to topics in ROS 2.

        • structuredMessage (dict) – [REQUIRED]

          The structured message for the message signal. It can be defined with either a primitiveMessageDefinition, structuredMessageListDefinition, or structuredMessageDefinition recursively.

          Note

          This is a Tagged Union structure. Only one of the following top level keys can be set: primitiveMessageDefinition, structuredMessageListDefinition, structuredMessageDefinition.

          • primitiveMessageDefinition (dict) –

            Represents a primitive type node of the complex data structure.

            Note

            This is a Tagged Union structure. Only one of the following top level keys can be set: ros2PrimitiveMessageDefinition.

            • ros2PrimitiveMessageDefinition (dict) –

              Information about a PrimitiveMessage using a ROS 2 compliant primitive type message of the complex data structure.

              • primitiveType (string) – [REQUIRED]

                The primitive type (integer, floating point, boolean, etc.) for the ROS 2 primitive message definition.

              • offset (float) –

                The offset used to calculate the signal value. Combined with scaling, the calculation is value = raw_value * scaling + offset.

              • scaling (float) –

                A multiplier used to decode the message.

              • upperBound (integer) –

                An optional attribute specifying the upper bound for STRING and WSTRING.

          • structuredMessageListDefinition (dict) –

            Represents a list type node of the complex data structure.

            • name (string) – [REQUIRED]

              The name of the structured message list definition.

            • memberType (dict) –

              The member type of the structured message list definition.

              Note

              This is a Tagged Union structure. Only one of the following top level keys can be set: primitiveMessageDefinition, structuredMessageListDefinition, structuredMessageDefinition.

            • listType (string) – [REQUIRED]

              The type of list of the structured message list definition.

            • capacity (integer) –

              The capacity of the structured message list definition when the list type is FIXED_CAPACITY or DYNAMIC_BOUNDED_CAPACITY.

          • structuredMessageDefinition (list) –

            Represents a struct type node of the complex data structure.

            • (dict) –

              Represents a StructureMessageName to DataType map element.

              • fieldName (string) – [REQUIRED]

                The field name of the structured message. It determines how a data value is referenced in the target language.

              • dataType (dict) –

                The data type.

                Note

                This is a Tagged Union structure. Only one of the following top level keys can be set: primitiveMessageDefinition, structuredMessageListDefinition, structuredMessageDefinition.

      • customDecodingSignal (dict) –

        Information about a custom signal decoder.

        Warning

        Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

        • id (string) – [REQUIRED]

          The ID of the signal.

  • signalDecodersToUpdate (list) –

    A list of updated information about decoding signals to update in the decoder manifest.

    • (dict) –

      Information about a signal decoder.

      • fullyQualifiedName (string) – [REQUIRED]

        The fully qualified name of a signal decoder as defined in a vehicle model.

      • type (string) – [REQUIRED]

        The network protocol for the vehicle. For example, CAN_SIGNAL specifies a protocol that defines how data is communicated between electronic control units (ECUs). OBD_SIGNAL specifies a protocol that defines how self-diagnostic data is communicated between ECUs.

      • interfaceId (string) – [REQUIRED]

        The ID of a network interface that specifies what network protocol a vehicle follows.

      • canSignal (dict) –

        Information about signal decoder using the Controller Area Network (CAN) protocol.

        • messageId (integer) – [REQUIRED]

          The ID of the message.

        • isBigEndian (boolean) – [REQUIRED]

          Whether the byte ordering of a CAN message is big-endian.

        • isSigned (boolean) – [REQUIRED]

          Whether the message data is specified as a signed value.

        • startBit (integer) – [REQUIRED]

          Indicates the beginning of the CAN signal. This should always be the least significant bit (LSB).

          This value might be different from the value in a DBC file. For little endian signals, startBit is the same value as in the DBC file. For big endian signals in a DBC file, the start bit is the most significant bit (MSB). You will have to calculate the LSB instead and pass it as the startBit.

        • offset (float) – [REQUIRED]

          The offset used to calculate the signal value. Combined with factor, the calculation is value = raw_value * factor + offset.

        • factor (float) – [REQUIRED]

          A multiplier used to decode the CAN message.

        • length (integer) – [REQUIRED]

          How many bytes of data are in the message.

        • name (string) –

          The name of the signal.

      • obdSignal (dict) –

        Information about signal decoder using the on-board diagnostic (OBD) II protocol.

        • pidResponseLength (integer) – [REQUIRED]

          The length of the requested data.

        • serviceMode (integer) – [REQUIRED]

          The mode of operation (diagnostic service) in a message.

        • pid (integer) – [REQUIRED]

          The diagnostic code used to request data from a vehicle for this signal.

        • scaling (float) – [REQUIRED]

          A multiplier used to decode the message.

        • offset (float) – [REQUIRED]

          The offset used to calculate the signal value. Combined with scaling, the calculation is value = raw_value * scaling + offset.

        • startByte (integer) – [REQUIRED]

          Indicates the beginning of the message.

        • byteLength (integer) – [REQUIRED]

          The length of a message.

        • bitRightShift (integer) –

          The number of positions to shift bits in the message.

        • bitMaskLength (integer) –

          The number of bits to mask in a message.

      • messageSignal (dict) –

        The decoding information for a specific message which supports higher order data types.

        • topicName (string) – [REQUIRED]

          The topic name for the message signal. It corresponds to topics in ROS 2.

        • structuredMessage (dict) – [REQUIRED]

          The structured message for the message signal. It can be defined with either a primitiveMessageDefinition, structuredMessageListDefinition, or structuredMessageDefinition recursively.

          Note

          This is a Tagged Union structure. Only one of the following top level keys can be set: primitiveMessageDefinition, structuredMessageListDefinition, structuredMessageDefinition.

          • primitiveMessageDefinition (dict) –

            Represents a primitive type node of the complex data structure.

            Note

            This is a Tagged Union structure. Only one of the following top level keys can be set: ros2PrimitiveMessageDefinition.

            • ros2PrimitiveMessageDefinition (dict) –

              Information about a PrimitiveMessage using a ROS 2 compliant primitive type message of the complex data structure.

              • primitiveType (string) – [REQUIRED]

                The primitive type (integer, floating point, boolean, etc.) for the ROS 2 primitive message definition.

              • offset (float) –

                The offset used to calculate the signal value. Combined with scaling, the calculation is value = raw_value * scaling + offset.

              • scaling (float) –

                A multiplier used to decode the message.

              • upperBound (integer) –

                An optional attribute specifying the upper bound for STRING and WSTRING.

          • structuredMessageListDefinition (dict) –

            Represents a list type node of the complex data structure.

            • name (string) – [REQUIRED]

              The name of the structured message list definition.

            • memberType (dict) –

              The member type of the structured message list definition.

              Note

              This is a Tagged Union structure. Only one of the following top level keys can be set: primitiveMessageDefinition, structuredMessageListDefinition, structuredMessageDefinition.

            • listType (string) – [REQUIRED]

              The type of list of the structured message list definition.

            • capacity (integer) –

              The capacity of the structured message list definition when the list type is FIXED_CAPACITY or DYNAMIC_BOUNDED_CAPACITY.

          • structuredMessageDefinition (list) –

            Represents a struct type node of the complex data structure.

            • (dict) –

              Represents a StructureMessageName to DataType map element.

              • fieldName (string) – [REQUIRED]

                The field name of the structured message. It determines how a data value is referenced in the target language.

              • dataType (dict) –

                The data type.

                Note

                This is a Tagged Union structure. Only one of the following top level keys can be set: primitiveMessageDefinition, structuredMessageListDefinition, structuredMessageDefinition.

      • customDecodingSignal (dict) –

        Information about a custom signal decoder.

        Warning

        Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

        • id (string) – [REQUIRED]

          The ID of the signal.

  • signalDecodersToRemove (list) –

    A list of signal decoders to remove from the decoder manifest.

    • (string) –

  • networkInterfacesToAdd (list) –

    A list of information about the network interfaces to add to the decoder manifest.

    • (dict) –

      Represents a node and its specifications in an in-vehicle communication network. All signal decoders must be associated with a network node.

      To return this information about all the network interfaces specified in a decoder manifest, use the API operation.

      • interfaceId (string) – [REQUIRED]

        The ID of the network interface.

      • type (string) – [REQUIRED]

        The network protocol for the vehicle. For example, CAN_SIGNAL specifies a protocol that defines how data is communicated between electronic control units (ECUs). OBD_SIGNAL specifies a protocol that defines how self-diagnostic data is communicated between ECUs.

      • canInterface (dict) –

        Information about a network interface specified by the Controller Area Network (CAN) protocol.

        • name (string) – [REQUIRED]

          The unique name of the interface.

        • protocolName (string) –

          The name of the communication protocol for the interface.

        • protocolVersion (string) –

          The version of the communication protocol for the interface.

      • obdInterface (dict) –

        Information about a network interface specified by the on-board diagnostic (OBD) II protocol.

        • name (string) – [REQUIRED]

          The name of the interface.

        • requestMessageId (integer) – [REQUIRED]

          The ID of the message requesting vehicle data.

        • obdStandard (string) –

          The standard OBD II PID.

        • pidRequestIntervalSeconds (integer) –

          The maximum number message requests per second.

        • dtcRequestIntervalSeconds (integer) –

          The maximum number message requests per diagnostic trouble code per second.

        • useExtendedIds (boolean) –

          Whether to use extended IDs in the message.

        • hasTransmissionEcu (boolean) –

          Whether the vehicle has a transmission control module (TCM).

      • vehicleMiddleware (dict) –

        The vehicle middleware defined as a type of network interface. Examples of vehicle middleware include ROS2 and SOME/IP.

        • name (string) – [REQUIRED]

          The name of the vehicle middleware.

        • protocolName (string) – [REQUIRED]

          The protocol name of the vehicle middleware.

      • customDecodingInterface (dict) –

        Information about a custom network interface.

        • name (string) – [REQUIRED]

          The name of the interface.

  • networkInterfacesToUpdate (list) –

    A list of information about the network interfaces to update in the decoder manifest.

    • (dict) –

      Represents a node and its specifications in an in-vehicle communication network. All signal decoders must be associated with a network node.

      To return this information about all the network interfaces specified in a decoder manifest, use the API operation.

      • interfaceId (string) – [REQUIRED]

        The ID of the network interface.

      • type (string) – [REQUIRED]

        The network protocol for the vehicle. For example, CAN_SIGNAL specifies a protocol that defines how data is communicated between electronic control units (ECUs). OBD_SIGNAL specifies a protocol that defines how self-diagnostic data is communicated between ECUs.

      • canInterface (dict) –

        Information about a network interface specified by the Controller Area Network (CAN) protocol.

        • name (string) – [REQUIRED]

          The unique name of the interface.

        • protocolName (string) –

          The name of the communication protocol for the interface.

        • protocolVersion (string) –

          The version of the communication protocol for the interface.

      • obdInterface (dict) –

        Information about a network interface specified by the on-board diagnostic (OBD) II protocol.

        • name (string) – [REQUIRED]

          The name of the interface.

        • requestMessageId (integer) – [REQUIRED]

          The ID of the message requesting vehicle data.

        • obdStandard (string) –

          The standard OBD II PID.

        • pidRequestIntervalSeconds (integer) –

          The maximum number message requests per second.

        • dtcRequestIntervalSeconds (integer) –

          The maximum number message requests per diagnostic trouble code per second.

        • useExtendedIds (boolean) –

          Whether to use extended IDs in the message.

        • hasTransmissionEcu (boolean) –

          Whether the vehicle has a transmission control module (TCM).

      • vehicleMiddleware (dict) –

        The vehicle middleware defined as a type of network interface. Examples of vehicle middleware include ROS2 and SOME/IP.

        • name (string) – [REQUIRED]

          The name of the vehicle middleware.

        • protocolName (string) – [REQUIRED]

          The protocol name of the vehicle middleware.

      • customDecodingInterface (dict) –

        Information about a custom network interface.

        • name (string) – [REQUIRED]

          The name of the interface.

  • networkInterfacesToRemove (list) –

    A list of network interfaces to remove from the decoder manifest.

    • (string) –

  • status (string) – The state of the decoder manifest. If the status is ACTIVE, the decoder manifest can’t be edited. If the status is DRAFT, you can edit the decoder manifest.

  • defaultForUnmappedSignals (string) –

    Use default decoders for all unmapped signals in the model. You don’t need to provide any detailed decoding information.

    Warning

    Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Return type:

dict

Returns:

Response Syntax

{
    'name': 'string',
    'arn': 'string'
}

Response Structure

  • (dict) –

    • name (string) –

      The name of the updated decoder manifest.

    • arn (string) –

      The Amazon Resource Name (ARN) of the updated decoder manifest.

Exceptions